Instruction/ maintenance manual of the product MRC-2U Magnadyne
Go to page of 12
Operation and Installation Manual MRC-2U Universal W atertight Marine Radio Controller with Speed Indicators.
2 Index Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Please carefully read all of the information in this manual. Familiarity with operation and installation proce- dures will help you obtain the best possible performance from your new Marine Radio Controller . Introduction 3 1. Speed-Up Button: Press to alert driver to speed up.
4 Selecting a Source/Mode: T o select a play source, press the SRC button until the desired source/mode is selected. Volume: Increase the volume by pressing the VOL + button. Increase the volume by pressing the VOL - button. Increase Decrease General Operations Mute: Press the button to mute the volume level.
5 Remote Installation Inserting Strap: Insert strap through the remote holder with tabs facing outward. Removing the Remote Removing the Remote from Holder: Press the release tab and slide out the remote. T o reinstall, slide the remote into the holder until it snaps into place.
6 Wiring Diagram Antenna Wire Do Not Cut or Connect Green LED (Speed-Up) Red LED (Slow-Down) Red Wire +12 Volt Switch Black Wire Ground Infrared Emitter Attach to radio’s infrared receiver. Note: Receiver’ s housing is not waterproof and must be mounted in a dry location.
Manufacturer Group Sub-Group Radio 1 Alpine 2 JVC 3 Pioneer 1 MobileVision and MB Quart 2 Kenwood 1 Sony Flashes the Number of Times the Switch is Pressed, Confirming Group Number 7 Step 1 T urn on the power to the receiver’ s housing. Press and hold the button on the receiver for 3 seconds.
8 Step 5 T o exit programming push the switch on/off 5 times or wait 15 seconds and the system will automatical- ly exit the “Automatic Code Learning” mode. or Step 6 T ry each button on the remote to make sure each button has been learned properly .
9 Using the RF Marine Remote press the corre- sponding “VOLUME UP” button to assign this function. Step 4 Flashes 2 Times The LED will flash 2 times indicating the “VOL- UME UP” button of the radio remote has been programmed. The LED will then turn off and is now ready for the next button to be programmed.
10 Step 1 T urn on the power to the receiver’ s housing. Press and hold the button on the receiver until the LED turns on solid. Step 2 Solid LED Learning an Additional Aquavibe Marine Remote Contro.
Step 1 T urn on the power to the receiver’ s housing. Press and hold the button on the receiver until the LED turns on solid then release button. Step 2 Solid LED Clearing All the Aquavibe Marine Remote Controller Codes Hold Push the receiver button 2 more times, holding on the last push.
© Copyright 2008 Magnadyne Corporation MRC-2U-IM/UM Rev . A 4-28-08 Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to.
An important point after buying a device Magnadyne MRC-2U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnadyne MRC-2U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnadyne MRC-2U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnadyne MRC-2U you will learn all the available features of the product, as well as information on its operation. The information that you get Magnadyne MRC-2U will certainly help you make a decision on the purchase.
If you already are a holder of Magnadyne MRC-2U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnadyne MRC-2U.
However, one of the most important roles played by the user manual is to help in solving problems with Magnadyne MRC-2U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnadyne MRC-2U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
