Instruction/ maintenance manual of the product N38 Madrigal Audio
Go to page of 38
Madrigal Audio Laboratories, Inc. Operating Manual Mark Levinson ® Nº38 Pr ea mp lifie r.
C A UT ION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
I mport an t Saf e ty I nstru c tions Please read all instructions and precautions carefully and completely before operating your Nº38 Preamplifier. 1. ALWAYS disconnect your entire system from the AC mains before connecting or disconnecting any cables, or when cleaning any component.
4 From all of us at Madrigal Audio Laboratories, thank you for choosing the Mark Levinson ® N º 38 Preamplifier. A great deal of effort went into the design and construction of this precision device. Used properly, it will give you many years of enjoyment.
5 T able of C ont e n ts Unpacking and Placement ........................................................................ 7 Placement ............................................................................................. 7 Ventilation .........
6.
7 Unpacking and Placement Unpack your N º 38 Preamplifier and keep all packing materials for future transport. Locate and remove all accessory items from the cartons.
8 O per ati n g V olt age The N º 38 Preamplifier is set at the factory (internally) for 100V, 120V, 200V, 230V, 220V, or 240V AC mains operation @ 50 or 60Hz. ( 230V/ 50Hz only in European Union countries, in compliance with CE regulations. ) This voltage setting cannot be changed by the user.
9 A Quick Start… We recognize that many people are understandably eager to begin listening to their new components, and that reading the manual is often done (if at all) at a later time — perhaps while listening to music through the new product itself.
10 MADRIGAL AUDIO LABORATORIES R display intensity monitor record select balance inverted polarity mono 123456 standby PREAMPLIFIER Nº 38 mode mute 9 8 7 3 2 1 5 10 6 4 F r on t pan el 1 DISPLAY INTE.
11 operating modes is given by the Mode Indicators below the Alphanumeric Display . (See 3, above.) 5 INVERTED POLARITY INDICATOR The polarity (sometimes inaccurately called “ absolute phase ” ) of the output of the N º 38 may be inverted via the N º 38 remote control, in which case this LED will light as confirmation.
12 Rear panel Disconnect all associated equipment from the AC mains BEFORE making any signal connections and applying power to the N º 38. Note: All left-channel inputs and outputs are on the left of the rear panel as seen from the front , and all right-channel inputs and outputs are on the right of the rear panel as seen from the front .
13 If your system calls for multiple outputs from the N º 38 (as might be the case for “ passive ” biamplification, for example), you may use balanced Y-adaptors to split each balanced output into two balanced outputs. The low output impedance (6 Ω ) of the N º 38 can easily drive multiple power amplifiers.
14 5 SLAVE AND MASTER COMMUNICATOR PORTS These communications ports allow the N º 38 to “ link ” to certain compatible Mark Levinson components. (See “ Linked Functions. ” ) The Mark Levinson Linking system uses a Digital Audio Processor as the Master of (and central clearinghouse for) inter-component communications.
15 The RJ-45 cable needed for the Link connection between source components and the preamplifier may be purchased from your Mark Levinson dealer. It may also be easily and inexpensively made to length using two RJ-45 connectors and the appropriate length (up to 100 feet/30 meters) of RJ-45 (flat, eight conductor) cable.
16 mode display polarity mono 12 34 56 volume mute 1 2 3 6 7 5 4 MADRIGAL AUDIO LABORATORIES R Re mot e C o nt r o l 1 MONO Pressing this button will toggle the N º 38 in and out of the Mono mode, having the same effect as pressing the front panel mono button.
17 Set-up and Installation The N º 38 incorporates both RCA-type and XLR-type connectors for audio signal input and output. The Madrigal-designed RCA-type connectors used for single-ended audio inter.
18 The N º 38 Preamplifier has many provisions for custom-tailoring the system ’ s operation to match your preferences. The consistent method for modifying any of these settings is to enter a Set-U.
19 The EQ alias also deserves special mention: if your loudspeaker requires a dedicated equaliser for proper operation (or if you have any other reason for using an EQ much of the time), you may connect the outputs of the equalizer to the input named “ EQ.
20 You may elect not to use either Record Output with this particular device, as may be the case if you have several devices in your system that are capable of recording. In this case, leave the display on “ RECD NONE ” and move to Step 6. You may also select either Record Output 1 or 2 to be associated with this particular input.
21 The N º 38 allows you to adjust the relative outputs of your various sources with respect to one another, so as to avoid disturbing and/or potentially dangerous changes in output levels as you switch from one source to the next.
22 currently chosen input, and “ 2.8 ” indicates the current offset for that input. 6 PRESS AND HOLD THE MODE BUTTON AGAIN… until the display reads NEW DATA , as below. This indicates that your new Input Offset has been stored in non- volatile memory.
23 In effect, you are setting the Input Offset of this input to remember an absolute volume setting (whatever it was before you held the Mode button down) rather than a relative setting (that is, relative to the current playback volume). 5 PRESS AND HOLD THE MODE BUTTON AGAIN… until the display reads NEW DATA .
24 2 ADJUST THE VOLUME KNOB TO YOUR PREFERRED SETTING You may select any value between -1 and -60 decibels (inclusive), in one-decibel increments. 3 PRESS AND HOLD THE MUTE BUTTON AGAIN When the display reads NEW DATA, the N º 38 will have saved your new setting in non-volatile memory.
25 Time-outs in the Nº38 In a similar fashion, the user of a N º 38 or N º 38S can elect to have the preamplifier (and the entire system, if Linked) go into standby after a certain period of time, much like a “ Sleep Timer ” on many alarm clocks.
26 Operational Modes The majority of time you spend with your N º 38 will be spent in the Monitor mode. In this mode, the display indicates the alias of the input you have selected and the listening volume (in decibels). The Output Control acts as a volume knob, increasing or decreasing the volume in 0.
27 display will alternatively read the alias of the chosen input and “ RECD OFF ” as shown below. Defeating the Record Outputs eliminates even the possibility that the input impedance of a recording device could have an effect on the sound quality of the preamplifier.
28 U si n g Surr oun d Soun d P r oc e s sor s The N º 38 Preamplifier incorporates a special surround sound processor mode which makes it uniquely capable of integrating the highest performance audio with surround sound — that is, dual-purpose music and movie systems.
29 The last remaining alternative would seem to be to insert the decoder “ within ” a preamplifier by hooking it up in a tape loop. Unfortunately, this set-up returns the Left and Right outputs of the decoder to the preamplifier, where they can be inappropriately changed without changing the Center and Surround outputs.
30 In some cases, connecting your audio and video systems together in this fashion can result in noise, typically a 60 Hz or 120 Hz hum. The most common cause for this noise is a “ ground loop ” caused by the presence of two ground references in the system: one from the power company and another from the cable-television company.
31 Linked Functions The N º 38 has the ability to “ link ” several of its functions to certain compatible Mark Levinson components (such as the N º 30 and N º 35 digital processors and the N º 31 CD transport).
32 Car e an d m ain t en an c e To remove dust from the cabinet of the N º 38, use a feather duster. To remove dirt and fingerprints, we recommend isopropyl alcohol and a soft cloth. Apply the alcohol to the cloth first and then lightly clean the surface of the N º 38, going with the grain of the brushed aluminum.
33 U .S . an d Can adian W arr an ty This Mark Levinson ® product is warranted to be free from defects in material and workmanship under normal use for a period of ninety (90) days from the date of purchase.
34 Ob t a ining S er v ic e We take great pride in our dealers. Experience, dedication, and integrity make these professionals ideally suited to assist with our customers ’ service needs. If your Mark Levinson component must be serviced, please contact your dealer.
35 Specifications The correlation between published specifications and sonic quality is unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation. Measurements of the N º 38 yield excellent results by any standards.
36 Dimensions, N º 38, top view Dimensions, N º 38, side view Dimensions (AC input) 13.38" 34 cm 7.68" 19.5 cm 13.38" 34 cm 2.25" 5.7 cm 2.96" 7.5 cm 3.76" 9.5 cm 0.08" 2 mm 3.125" 7.9 cm 0.5" 1.3 cm 0.925" 2.
37.
® MADRIGAL AUDIO LABORATORIES 2081 South Main Street, P.O. Box 781 Middletown, Connecticut 06457 USA Telephone: (860) 346-0896 Fax: (860) 346-1540 http://www.madrigal.com/ is a registered trademark of Madrigal Audio Laboratories, Inc. a Harman International company 630124-6 ©1/1997 Madrigal Audio Laboratories, Inc.
An important point after buying a device Madrigal Audio N38 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Madrigal Audio N38 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Madrigal Audio N38 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Madrigal Audio N38 you will learn all the available features of the product, as well as information on its operation. The information that you get Madrigal Audio N38 will certainly help you make a decision on the purchase.
If you already are a holder of Madrigal Audio N38, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Madrigal Audio N38.
However, one of the most important roles played by the user manual is to help in solving problems with Madrigal Audio N38. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Madrigal Audio N38 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
