Instruction/ maintenance manual of the product MCU Pro Mackie
Go to page of 17
MCU Pro MCU XT Pro OWNER’S MANUAL Univ ersal Contr ol Sur face Univ ersal Contr ol Sur face Extender BANK CHANNEL SOLO CYCLE DROP REPLACE CLICK SI GNA L SIG NAL S IGN AL SI GNA L SIG NA L SIG NAL S .
2 Mackie Contr ol Universal Mackie Contr ol Univ ers al 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.
Part No. SW0454 Rev . C 10/10 ©2007-2010 LOUD T echnologies Inc. All Rights Reserved. 3 Owner’ s Manual Owner’ s Manual Introduction Thank you for choosing Mackie for your Digital Audio W orkstation (DA W) control solution. MCU Pro and MCU XT Pro provide the familiar feel of analog-style mixing to the DA W environment.
4 Mackie Contr ol Universal Mackie Contr ol Univ ers al Changing Modes MCU Pro has three different modes of operation: 1. Mackie Control (use with most DA Ws. See Appendix C on page 12 ). 2. Logic Control (use with Apple Logic). 3. HUI (use with A vid Pro T ools, including HD, LE, and M Powered versions).
5 Owner’ s Manual Owner’ s Manual MCU Pro or MCU XT Pro Mounting Plate 0.153 in/3.88 mm Thread Engagement (8 places) Mounting Plate Thickness + 0.25 in = length of screw M4 (4 mm) Pemnut (8 places) 0.868 in/22.06 mm Clearance for MCU Pro 0.469 in/11.
6 Mackie Contr ol Universal Mackie Contr ol Univ ers al IN OU T MIDI EXTERNAL POWER PO WE R 3.0A -4 .0A 7.5V UNIVERSAL CONTROL SURFACE EXTENDER IN OU T MIDI EXTERNAL POWER PO WE R 3.
7 Owner’ s Manual Owner’ s Manual Front Panel Although the functions of the knobs and buttons on the MCU Pro will vary depending on which software application is being utilized, this section provides an overview of the control surface and a general explanation of what it can do.
8 Mackie Contr ol Universal Mackie Contr ol Univ ers al Master Section 9. V-POT ASSIGN These six buttons are used to assign different functions to the V -Pots.
9 Owner’ s Manual Owner’ s Manual Rear Panel 17. USB POR T This is the USB connection between the MCU Pro and the host computer . Use the USB cable provided to connect this port to a USB port on the computer .
10 Mackie Contr ol Universal Mackie Contr ol Univ ers al Appendix A: Key Commands Engaging certain switches on the MCU Pro and MCU XT Pro during power up perform a variety of configuration tasks.
11 Owner’ s Manual Owner’ s Manual Appendix B: Fader Alignment A comprehensive fader alignment on the MCU Pro and MCU XT Pro is performed at the factory during quality control testing. Then, each time the unit is powered on, the faders complete a quick up-down test to verify that they are still aligned and working correctly .
12 Mackie Contr ol Universal Mackie Contr ol Univ ers al Appendix C: Software Support The following table is the MCU Pro Compatibility Chart. It shows what DA W works in what MCU Mode, as well as what overlay to use. Links to each DA W and exisiting documents is also added for your convenience.
13 Owner’ s Manual Owner’ s Manual Repair For warranty service, refer to the warranty information on page 16. Non-warranty service for Mackie products is available at a factory-authorized service center . T o locate the nearest service center , visit www .
14 Mackie Contr ol Universal Mackie Contr ol Univ ers al AC Power Requirements Power Requirements 7.5V DC, 3.0A – 4.0A External AC–DC Adapter 1.0A, 100 – 240 V AC, 50 – 60 Hz Operating T emperature 0˚ – 40˚C 32˚ – 104˚F Input/Output, USB, Faders I/O Midi in / Midi out USB Format: USB 1.
15 Owner’ s Manual Owner’ s Manual Dimensions BANK CHANNEL SOLO CYCLE DROP REPLACE CLICK SIGNAL SIGNAL SIGNAL SIGNAL SIGNAL SIGNAL SIGNAL SIGNAL FLIP GLOBAL VIEW DISPLAY MODIFIERS AUTOMATION UTILI.
16 Mackie Contr ol Universal Mackie Contr ol Univ ers al Mackie Limited W arranty Please keep your sales receipt in a safe place. This Limited Product W arranty (“Product W arranty”) is provided by LOUD T echnologies Inc.
16220 W ood-Red Road NE • W oodinville, W A 98072 • USA United States and Canada: 800.898.3211 Europe, Asia, Central and S outh America: 425.487 .4333 Middle East and Africa: 31.20.654.4000 F ax: 425.487 .4337 • www .mackie.com E -mail: sales@mackie.
An important point after buying a device Mackie MCU Pro (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mackie MCU Pro yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mackie MCU Pro - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mackie MCU Pro you will learn all the available features of the product, as well as information on its operation. The information that you get Mackie MCU Pro will certainly help you make a decision on the purchase.
If you already are a holder of Mackie MCU Pro, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mackie MCU Pro.
However, one of the most important roles played by the user manual is to help in solving problems with Mackie MCU Pro. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mackie MCU Pro along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
