Instruction/ maintenance manual of the product 48-SR-003-03-7L M-Systems Flash Disk Pioneers
Go to page of 16
FFD 2.5" and 3.5" IDE Plus F lash Disk User Man ual January 2004 48-SR-003-03-7L Rev 2.1.
2 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 D OCUMENT C ONTROL I NFORMA TION DCO No.: N/A Title Name Date Issued by: Assistant Vice President, Rugged Market O.
3 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 T ABLE OF C ONTENTS 1 General ........................................................................................................................ ........... 4 2 Kit Contents .
4 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 1 G ENERAL This manual provides you with the information you need to properly install your new FFD 2.5” or 3.5” IDE Plus Flash Disk. M-Systems recommends that qualifie d and trained personnel install the drive.
5 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 4 H ANDLING I NSTRUCTIONS You can prolong the life of your IDE Plus, increase its reliability and prevent unnecessary damage by following the instructions listed below.
6 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 5 FFD IDE P LUS D RIVE C ONFIGURA TION 5.1 Master and Slave Jumper Settings 5.1.1 FFD 2.5” IDE Plus Prior to mounting the drive in the system drive bay, the FFD 2.
7 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 5.1.2 FFD 3.5” IDE Plus Prior to mounting the drive in the system drive bay, the FFD 3.
8 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 5.2 Write-Protect Jumper Settings The FFD IDE Plus has a write-protect option th at is controlled by the jumper settings. 5.2.1 FFD 2.5” IDE Plus Figure 4 illustrates the jumper configuration for the write-protect option for the FFD 2.
9 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 5.2.2 FFD 3.5” IDE Plus Figure 5: illustrates the jumper configuration for the write-pr otect option for the FFD 3.
10 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 5.3 Interface Connectors 5.3.1 FFD 2.5” IDE Plus The FFD 2.5” IDE Plus has a 2.00 mm pitch interf ace connector located on the rear panel. The DC power and IDE bus are input through a non-shielded 50-pin flat cable.
11 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 6 I NST ALLA TION 6.1 System Requirements In order to install the IDE Plus in your system, ensure that you have the following items: • System mounting hardware • 44-pin ribbon IDE cable for FFD 2.
12 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 1. Run the DOS FDISK program to partition the IDE Plus. 2. Run the DOS FORMAT command to high-level format the IDE Plus. 3. If you want the IDE Plus to be a bootable drive, run the DOS SYS command and change its partition to active.
13 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 7 D RIVE P ARAMETERS Most IDE device drivers can autom atically detect the tota l number of sectors in the ID E Plus, using the IDENTIFY DRIVE command, and configur e them accord ingly.
14 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 Unformatted Disk Capacity (MB) Total Number of User-Addressable Sectors in LBA Mode (Words 60/61 of IDENTIFY info.
15 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 8 T ROUBLESHOOTING The problems that arise in most in stallations are summarized below: • Cables: o Homemade, s.
16 FFD 2.5" and 3.5" IDE Plus Flash Disk User Manual 48-SR-003-03-7L Rev 2.1 H OW TO C ONT ACT U S USA M-Systems Inc. 8371 Central Ave, Suite A Newark CA 94560 Phone: +1-510-494 -2090 Fax: +1-510 -494-554 5 China M-Systems China Ltd. Room 12 1-122 Bldg.
An important point after buying a device M-Systems Flash Disk Pioneers 48-SR-003-03-7L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought M-Systems Flash Disk Pioneers 48-SR-003-03-7L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data M-Systems Flash Disk Pioneers 48-SR-003-03-7L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, M-Systems Flash Disk Pioneers 48-SR-003-03-7L you will learn all the available features of the product, as well as information on its operation. The information that you get M-Systems Flash Disk Pioneers 48-SR-003-03-7L will certainly help you make a decision on the purchase.
If you already are a holder of M-Systems Flash Disk Pioneers 48-SR-003-03-7L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime M-Systems Flash Disk Pioneers 48-SR-003-03-7L.
However, one of the most important roles played by the user manual is to help in solving problems with M-Systems Flash Disk Pioneers 48-SR-003-03-7L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device M-Systems Flash Disk Pioneers 48-SR-003-03-7L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
