Instruction/ maintenance manual of the product DCP200 M-Audio
Go to page of 2
D A B J J A B C C Assembly Instructions • The stand should be assembled on a at oor surface. • Make sure you ar e using the correct scr ews for each assembly step, and only use the screws included with your piano. Use of incorrect scr ews can permanently damage the piano.
Slide the Modesty Panel (E) into place so that the two top screw holes ar e in front of the two corr esponding metal brackets, and the four bottom screw holes line up behind the Pedal Board (D). From the fr ont of the Modesty Panel, use the two screws (K) with washers to attach the top of the Modesty Panel to the metal brackets on each leg.
An important point after buying a device M-Audio DCP200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought M-Audio DCP200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data M-Audio DCP200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, M-Audio DCP200 you will learn all the available features of the product, as well as information on its operation. The information that you get M-Audio DCP200 will certainly help you make a decision on the purchase.
If you already are a holder of M-Audio DCP200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime M-Audio DCP200.
However, one of the most important roles played by the user manual is to help in solving problems with M-Audio DCP200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device M-Audio DCP200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center