Instruction/ maintenance manual of the product MNCS / MNCSB M&S Systems
Go to page of 4
Mini - Cube Home Theater Package Model MNCS / MNCSB Mini - Cube Speakers Model MNC / MNCB Instruction Manual INTRODUCTION M&S Systems is introducing cube speakers (MNC) and a cube speaker package for Home Theater applications (MNCS) offering quality sound at an affordable price.
The subwoofer for the Mini - Cube Home Theater Package has an 8” active woofer. It is available in a black matte finish. RMS Power Rating 100 Watts Frequency Response 40 Hz to 350 Hz Crossover 40 Hz to 180Hz (Adjustable) Controls Power, Volume, Crossover Frequency, Phase Connections RCA Jacks and Spring Terminals Height 13.
Figure 2 5. The MNCS system may be connected two ways depending on the amplifier used with the system. The major difference is the subwoofer connections. • An amplifier with a subwoofer output connection, usually a RCA type connector would be the preferred connection when used with the MNCS subwoofer (see figure 3).
• The power switch can be set to OFF - AUTO - ON. The OFF position disables the subwoofer completely. The AUTO position puts the subwoofer in a standby mode (low power) when the system is not in use. When a signal is applied, the subwoofer is automatically turned on.
An important point after buying a device M&S Systems MNCS / MNCSB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought M&S Systems MNCS / MNCSB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data M&S Systems MNCS / MNCSB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, M&S Systems MNCS / MNCSB you will learn all the available features of the product, as well as information on its operation. The information that you get M&S Systems MNCS / MNCSB will certainly help you make a decision on the purchase.
If you already are a holder of M&S Systems MNCS / MNCSB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime M&S Systems MNCS / MNCSB.
However, one of the most important roles played by the user manual is to help in solving problems with M&S Systems MNCS / MNCSB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device M&S Systems MNCS / MNCSB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
