Instruction/ maintenance manual of the product LDT-3001 Lowrance electronic
Go to page of 8
INST ALLA TION AND OPERA TION INSTRUCTIONS MODEL DIGIT AL SURF ACE TEMPERA TURE METER LDT-3001.
2 1/8" (54 mm) HOLE 2 1/2" (64 mm) (SQUARE BEZEL) 2 3/8" ( 60 mm) (ROUND BEZEL) 1 The LDT-3001 is a digital temperature meter . It's operation is completely automatic. There are no controls. This unit fits in a standard 2 1/8" (54 mm) hole used by most marine equipment manufacturers.
IMPORTANT! Make certain the red wire is fused. If the boat manufacturer installed your unit, check the wiring and locate the 3001’s fuse holder. It should have a 1 amp fuse installed. If you purchased the 3001 from a dealer, a fuse holder with fuse is supplied.
SENSOR CONNECTIONS Mount the temperature sensor in a location that allows contact with the water at all times. The illustration below shows a typical location. Once a suitable place is found, mount the sensor to the hull with two #8 stainless steel screws.
OPERATION To use the 3001, simply turn the power switch on. The 3001 will instantly show the surface water temperature. This unit shows temperature in degrees Fahrenheit, in tenths of a degree. If the temperature is above 99.9 degrees, a small arrow appears in the upper left corner of the display appears.
5 LOWRANCE ELECTRONICS FULL ONE-YEAR WARRANTY “We", “our”, or “us” refers to LOWRANCE ELECTRONICS, INC., the manufacturer of this product. “You” or “your” refers to the first person who purchases this product as a consumer item for personal, family, or household use.
6 How to Obtain Service (Canadian Customers Only) We back your investment in quality products with quick, expert service and genuine Eagle replacement parts. If you need service or repairs, contact the Lowrance Factory Customer Service Department at the toll-free number listed below.
LITHO IN US.A. 122898 988-0099-02 LOWRANCE ELECTRONICS, INC. 12000 E SKELLY DR TULSA OK 74128 Your unit is covered by a full one-year warranty. (See inside for complete warranty details.
An important point after buying a device Lowrance electronic LDT-3001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lowrance electronic LDT-3001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lowrance electronic LDT-3001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lowrance electronic LDT-3001 you will learn all the available features of the product, as well as information on its operation. The information that you get Lowrance electronic LDT-3001 will certainly help you make a decision on the purchase.
If you already are a holder of Lowrance electronic LDT-3001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lowrance electronic LDT-3001.
However, one of the most important roles played by the user manual is to help in solving problems with Lowrance electronic LDT-3001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lowrance electronic LDT-3001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
