Instruction/ maintenance manual of the product F200-2 Logan Graphic Products
Go to page of 4
Description The Model F200-2 Precision Sander Elite has been designed to improve saw cut miters to perfect 45˚. A new 10” diameter wheel can accommodate most moulding sizes. After sanding the miters, the result is a sharp seamless frame corner that is of professional quality.
Assembly 1. Remove sanding wheel from base board using wrench supplied. SAVE WRENCH & SCREW (Fig. 1). 2. Discard washers and nut. 3. Attach sanding wheel to top plate using screw and wrench from step 1 (Fig. 2). Identification Instruction Manual Model F200-2 Precision SANDER ELITE 2 Fig.
3 Fig. 3 Moulding Pieces Fig. 4a Left Side Check top Align Bottom Fig. 4b Right Side Fig. 5 Instruction Manual Model F200-2 Precision SANDER ELITE Operation Preparation 1. Rotate alignment bar to either side by lifting and turning (Fig. 3) Sanding 1. Place back of moulding against alignment bar with finish side up.
Trouble Shooting Problem Solution Moulding splinters. Reverse sanding direction. Apply less pressure to surface being sanded. Not producing 45 degree angle. Refer to instructions for making adjustments using micro-adjustment blocks. Only small incre- mental adjustments are required.
An important point after buying a device Logan Graphic Products F200-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Logan Graphic Products F200-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Logan Graphic Products F200-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Logan Graphic Products F200-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Logan Graphic Products F200-2 will certainly help you make a decision on the purchase.
If you already are a holder of Logan Graphic Products F200-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Logan Graphic Products F200-2.
However, one of the most important roles played by the user manual is to help in solving problems with Logan Graphic Products F200-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Logan Graphic Products F200-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
