Instruction/ maintenance manual of the product A 26, A 26 DVB-T, A 26 DVB-T CI Loewe
Go to page of 34
1 233–32223.021 Operating instructions. ■ Xelos A 26 ■ Xelos A 26 DVB-T ■ Xelos A 26 DVB-T CI TV ..
2 Contents Remote Control – TV functions 3 Control unit 4 Connections to rear panel 5 W elcome 6 TV equipment 6 T ransporting 6 Installation possibilities 6 Cleaning 6 For your safety 7 First instal.
3 3 P+ OK P— V— V+ Sound off/on Switch on/off – to standby Y ellow button: last program Select program up F reeze frame off F reeze frame on Blue button: program info on/off V–/V+ volume quiet.
4 Contr ol unit Open menu, in menu: up Program up , in menu: right Switch TV on/off to standby Program down, in menu: left Display: red = standby green = operation orange = operation witho.
5 Connections to r ear panel Antenna sock et VHF/UHF/cable/DVB-T Audio output left/right (analog) Audio input left/right (analog) Center audio input (analog) H eadphones connection S-VHS connection (A VS) (e .
6 W elcome Note on LCD screen T he screen you have purchased meets the highest quality requirements in this segment and has been tested for pixel errors . Despite the utmost cau- tion in production of the sets , it cannot be totally ruled out that some of the pixels might be defective for technological reasons .
7 For your safety For your safety and to avoid unnecessary damage to your TV set, please read and observe the following safety instructions: • T his TV set is designed exclusively for reception and reproduction of video and audio signals .
8 First installation Remote control Batteries T o insert or change the batteries press on the arrow . Slide the battery compartment cover downwards and remove it. Insert Alkali Mangan LR 03 (AAA) batteries and ensure that the + and – ends are connected correctly .
9 First installation Automatic progr amming Automatic programming of the TV set is started the fi rst time you switch it on. F ollow the menus . F irst you have to select the menu language . T hen you enter which anten- nae you have connected to your TV set and in what country you are using it.
10 Daily oper ation Changing channels ... with the P+/P– buttons on the remote control Channel up/down ... with the numeric keys of the remote contr ol T he set has a dynamic memory with 430 (with DVB 1680) memory loca- tions .
11 Daily oper ation If you want to mak e other sound settings, move up with to “Bass“ and select with e .g. “others“. Y ou can also move up further with to “Sound“ and select other settings iln the TV menu. Y ou can have the other sound settings displayed with OK .
12 Adjusting the sound V olume and other frequently used sound settings Setting the volume you can have other sound settings displayed with ... and select with ... with to the appropriate selection/setting ... ... and select/set there with .
13 Modes of oper ation TV mode In initial installation and daily operation, the TV set is in TV mode. This is also the case when none of the other modes of operation such as EPG , T eletext, PIP or Radio has been selected. Each of these modes of operation has a menu, which you can call with the MENU button and with some color button assignments .
14 Modes of oper ation – TV TV menu Call up the TV menu Y ou will fi nd a description of the picture and sound settings on page 12. T he TV menu offers others for recording and connections and for .
15 Preview stations in the PIP picture T he frame around the PIP must be green. If it is not, press the green button. Start the station scan with the blue button. The PIP frame turns blue . T he stations now change automatically . Stop the station scan with the blue button.
16 Modes of oper ation – PIP Functions in the PIP menu In the PIP menu you set the PIP type (small picture or split screen) and the position of the small picture . Call the PIP menu (PIP must be active) Split Screen Instead of as a small picture , you can have the PIP picture displayed on the right hand side of the screen.
17 Modes of oper ation – EPG Y ou have direct access to the selection lines to pre-select the day , the time , the station and the topic. blue colour button: Call Select date/time/station/topics With select the menu line date , time , station or topics .
18 Modes of oper ation – EPG Programming r ecording for recorder s Y ou prepare the station marked with the buttons for recording by pressing the red button. In the following menu you confirm the timer data or change them as required. Then a red dot is set in front of this program in the EPG program list as an identifi cation.
19 Modes of oper ation – T elete xt Scroll in multiple pages . Y ou can see which multiples pages can be called in the bottom menu line . Call contents page 100 Call the T OP table T he T OP table is a general list of teletext. Y ou can only call the table on stations , which use the T OP operating system.
20 Modes of oper ation – T elete xt Program timer r ecordings A video or DVD recorder must be connected and logged in. Call the program pages of the current station with the Record button • in teletext mode . Scroll to the teletext page in which the program to be recorded is listed if necessary .
21 Oper ating additional equipment Search for and store the station of the video r ecorder (if no Euro A V cable is available) Switch on the test station on the VCR or insert a recorded tape and start playback. In some video recorders the station must be switched on by activating the modulator .
22 Oper ating additional equipment Timer r ecording with video or DVD recor der Y ou can program timer recordings on the TV set. Programming can be done with the EPG , teletext or manually . Open the TV menu with the MENU button, select the „Recording” menu item with and “New recording” with .
23 Oper ating additional equipment Audio output “ AUDIO DIGIT AL OUT“ T he digital audio signal is applied at the “ A UDIO DIGIT AL OUT” sock et of the TV . F or example , you can connect an external digital audio amplifi er or the Loewe Auro system here.
24 ON Line IN Pow er O UT OFF Bass Intensity Center to System connector 230V~50/60Hz Surr. Front Right Surr. Front Subw. Left Right Center Left Slave Master R R L C L Phase Min.
25 Oper ating additional equipment Connecting other audio amplifiers or active speakers In the connection wizard set “ HiFi/A V amplifier ” under “Device selection: Audio device“.
26 Oper ating additional equipment HDMI (DVI) connection T he HDMI connection (High Defi niton Multimedia Interface) allows digital picture and sound transmission via a connecting cable , e .g. from DVD players . The digital picture and sound data are transmitted without data compression and therefore lose none of their quality .
27 Oper ating additional equipment Sound from PC or Set T op Box F eed the analog audio signal from the PC or the STB to the sock ets AUDIO IN L/R on the TV via a cinch cable.
28 Oper ating additional equipment Operating Loewe video recor ders and Loewe DVD player s directly Y ou can switch over the remote control of the TV set to operate Loewe video recorders and Loewe DVD players . T hese devices can be operated directly .
29 What to do , if ... Problem T imer recording, Change timer and Delete timer are not displayed in the TV menu “Connections” for example cannot be called in the TV menu (grayed out) T he control of the Loewe video recorder and the timer do not work or do not work properly .
30 Problem Digital Link Plus does not function V arious characters are displayed incorrectly in the teletext No sound via external digital audio amplifi er P ossible cause a) Euro AV cable is not ful.
31 T echnical data Mechanical data Xelos A 26 Item No . 64413.A60 Xelos A 26 DVB-T Item No . 64413.A88 Xelos A 26 DVB-T -CI Item No . 64413.A87 Dimensions (cm) 57.
32 A vailable accessories W all holder Use the wall holder WM52, Loewe order no. 63493A00. Digital Satellite T uner If your TV set is already equipped for DVB-T reception, you can have it retrofi tted with a satellite tuner . T he digital satellite tuners are integrated in the TV set and are operated by the remote control/menu control of the TV .
33 Printed in Germany 3/12.04/2,0 Subject to modifi cation Germany Loewe Opta GmbH K undendienst Zentrale Indurstriestraße 11 D–96317 Kronach T el. 09261–990 F ax 09261–95411 Great Britain LinnSight Ltd. PO Box 8465 Prestwick UK – KA 7 2YF T el.
34.
An important point after buying a device Loewe A 26, A 26 DVB-T, A 26 DVB-T CI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Loewe A 26, A 26 DVB-T, A 26 DVB-T CI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Loewe A 26, A 26 DVB-T, A 26 DVB-T CI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Loewe A 26, A 26 DVB-T, A 26 DVB-T CI you will learn all the available features of the product, as well as information on its operation. The information that you get Loewe A 26, A 26 DVB-T, A 26 DVB-T CI will certainly help you make a decision on the purchase.
If you already are a holder of Loewe A 26, A 26 DVB-T, A 26 DVB-T CI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Loewe A 26, A 26 DVB-T, A 26 DVB-T CI.
However, one of the most important roles played by the user manual is to help in solving problems with Loewe A 26, A 26 DVB-T, A 26 DVB-T CI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Loewe A 26, A 26 DVB-T, A 26 DVB-T CI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
