Instruction/ maintenance manual of the product XSERVE RAID 073-0755 Apple
Go to page of 6
073-0755 Re v . A Xserve RAID Locking Switch Replacement Instructions F ollow the instructions in this sheet carefully . F ailure to f ollo w these instructions could damage your equipment and v oid its w arranty . Online instructions cov ering customer-installable par ts are av ailab le at http://www .
Xserve RAID Locking Switch - 2 7. Remov e the two scre ws that secure the system to the front rail of the r ac k. (Figure 1) Figure 1 8. Remov e the two scre ws that secure the bac k of the system’ s side panels to the rack.
Xserve RAID Locking Switch - 3 Removing the Installed Locking Switch The locking s witch is located at the front of the chassis near the inside front bez el. It is on the right side of the chassis as viewed from the front of the unit. 1. Disconnect the locking s witch cab le from the right front panel board.
Xserve RAID Locking Switch - 4 Closing Xserv e RAID 1. Place the cov er on top of the enclosure so that it is appro ximately 1/4 inch bac k from the front bezel. (Figure 4) Note: The left and right sides of the cover should fit inside the enclosure. 2.
Xserve RAID Locking Switch - 5 4. With one person supporting each side of the unit, slide it all the w a y into the r ack until the unit engages the small posts at the rear of the L-brac kets . (Figure 5) Figure 5 5. Replace the two scre ws that secure the unit to the front rail of the rac k.
Xserve RAID Locking Switch - 6 Apple Computer , Inc. © 2003 Apple Computer , Inc. All rights reser ved. This document is protected under U .S . Copyright La w and Inter national T reaties, and no par t of this document may be reproduced in an y f orm without wr itten per mission from Apple.
An important point after buying a device Apple XSERVE RAID 073-0755 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Apple XSERVE RAID 073-0755 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Apple XSERVE RAID 073-0755 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Apple XSERVE RAID 073-0755 you will learn all the available features of the product, as well as information on its operation. The information that you get Apple XSERVE RAID 073-0755 will certainly help you make a decision on the purchase.
If you already are a holder of Apple XSERVE RAID 073-0755, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Apple XSERVE RAID 073-0755.
However, one of the most important roles played by the user manual is to help in solving problems with Apple XSERVE RAID 073-0755. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Apple XSERVE RAID 073-0755 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
