Instruction/ maintenance manual of the product PAP2-IG-v 1-0-042805 Linksys
Go to page of 10
PAP2 Phone Adapter Installation Guide OUTBOUND CALLING Version 1.0 DocVersion: PAP 2-IG-v1-0-042805.
All Rights Reserved © Copyright 2005 The use, disclosure, modification, transfer, or transmittal of this work for any purpose, in any form, or by any means, without the written permission of the copyright holder, is strictly forbidden. Trademarks used herein are the property of their respec tive owners.
Linksys PAP2 Installation Guide Page i Table of Contents 1 Introduction ................................................................ 1 2 Adapter Desc ription .................................................... 2 2.1 PAP2 Overview ................
Linksys PAP2 Installation Guide Page 1 1 Introduction This doc ument is a n insta llatio n/config uration guide for the L inksys P AP2 ph one adap ter running firmware version 2.0.10 (LSc). It de scribes how to configure the SIP parameters, codec settings and analog coefficients for outb ound calling.
Linksys PAP2 Installation Guide Page 2 2 Adapter Description The sections below briefl y describe the PAP2 device. 2.1 PAP2 Overview The PAP2 is a 2-port FXS phone adapter, which allows you to connect two (2) analog phones. PAP2 2-Port FXS Phone A dapter 2.
Linksys PAP2 Installation Guide Page 3 PAP2 MENU OPTIONS Action Code User Input Behavior Notes Enter IVR Menu **** None Do not press any other keys until you hear, “Configuration menu. Please enter option followed by the pound (#) key, or hang up to exit.
Linksys PAP2 Installation Guide Page 4 3. Provisioning 3.1 General Configuration for Outbound Calling To configure the PAP2 for outbound calling: 1. Connect to the PAP2 by entering the de vi ce’s IP address in the Web browser’s Address bar. For instructions on obtaining the IP address, refer to section 2.
Linksys PAP2 Installation Guide Page 5 3.2 Line-Specific Configuration 1. Click the Line1 or Line2 tab at the top of the page, and in the NAT Settings section, change the following setting: Field Value NAT Keep Alive Enable no 2.
Linksys PAP2 Installation Guide Page 6 Proxy and Registration and Subscriber Information Sections 6. Scroll to the Audio Configuration section (as shown in the Audio Configurations and Dial Plan S ect.
Linksys PAP2 Installation Guide Page 7 Audio Configuration and Dial Plan Sections 7. In the Dial Plan section, change the Dial Plan to fit the dialing pattern in your country. The dialed number must start with ‘1’ for US calls and ‘011’ for non-US calls.
An important point after buying a device Linksys PAP2-IG-v 1-0-042805 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linksys PAP2-IG-v 1-0-042805 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linksys PAP2-IG-v 1-0-042805 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linksys PAP2-IG-v 1-0-042805 you will learn all the available features of the product, as well as information on its operation. The information that you get Linksys PAP2-IG-v 1-0-042805 will certainly help you make a decision on the purchase.
If you already are a holder of Linksys PAP2-IG-v 1-0-042805, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linksys PAP2-IG-v 1-0-042805.
However, one of the most important roles played by the user manual is to help in solving problems with Linksys PAP2-IG-v 1-0-042805. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linksys PAP2-IG-v 1-0-042805 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
