Instruction/ maintenance manual of the product IEEE 802.11n Lindy
Go to page of 22
IEEE 802.11n Wireless USB Adapter User’s Manual November 2009.
1 FCC Warning This equipment has been tested and found to comply with the limits for a Class C digital device , pursuant to part 15 of the FCC Rules. Thes e limits are designe d to provide reasonable protection against harmful interference i n a re sidential installation.
2 IMPORTANT NOTE: In the event that these conditions canno t be me t (for example certain laptop configurations or co-location with another transmitter), then the FCC au thorization is no longer considered valid and the FCC ID cannot be used on the final produ ct.
3 Contents 1. INTRODUCTION ................................................................................................... 4 1.1 F EATURES ................................................................................................
4 1. Introduction This is a wireless 11n USB Adapter that provid e s unsurpassed wireless perform ance for your Desktop PC or Notebook. It complies with IEEE 802.
5 2. Software Installation Note: The following installation was operated under Windows 7. (Procedures will be same for Windows Vista, XP and 2000 Operation System) Step1: Insert the Wireless USB adapter into the USB slot of your computer. The system will automatically find the device and search for its driver.
6 Step2: Insert Wireless USB Adapter Installation CD into CD-ROM drive then windo ws below will appear. Click Install Driver & Utility to begin device driver installation. Step3: Select the language for this installation from the choices belo w and click Nex t> to continue.
7 Step4: The InstallShield Wizard will install Wirele ss LAN Driver and Utility on your computer. For next step, click Next> to continue. Step5: Click In stall begin the installation.
8 Step6: Please wait for a while for installing process. Step7: After Wizard has finished the installing, choose “ Ye s, I want to restart my computer now” before you can use the utility.
9 To check if Wireless PCI card is p roperly installed, you can right-cli ck Computer Æ choose Properties Æ click Device Manager . [Configuring Wireless Ne twork] Step 1: Open the Wireless Utility and go to “ Available Net work ” tab, double-click the network which you want to connect or click “ Add to Profile ” button to continue.
10 necessary. And click “ OK ” to continue. Step 3: In the “ Profile ” tab, you can see the ava ilable network is list ed. Step 4: And now, you can browse your Internet Explorer to surfing the web.
11.
12 3. Wireless LAN Utility The Wireless LAN Utility is an app lication that helps you to c onfigure the USB Wireless LAN adapter and monitor the link status and stat istics during the communication pro cess. 3.1 General In the “ General ”, you can immediately monitor the li nk status.
13 3.3 Available Network The “ Available Net work ” shows all Access Points, R outers or Adapters nearby when operating in Ad-Hoc mode. Click “ Refresh ” button to collect the SSID and Chann el in formation of all the wireless devices nearby.
14 network properties windows will display. You can confi gure your Wireless Network Security for the card. [Network Authen tication] -- Open System: No authentication is needed among t he wireless devices. -- Shared Key: Only Wirel ess device using a shared key (WEP Key identified ) is allowed to connecting each other.
15 [Data Encryption] -- Disabled: Disabl e the WEP Data Encryption. -- WEP: Enabled the WEP Data Encry ption. When the item i s selected, you have to continu e setting the WEP Key Length & the key Index. -- TKIP: Enable the TKIP Data Encryption. When the item is selected, you have to continue setting the Network Key & Confirm network key.
16 receiving status. 3.6 Wi-Fi Protect Setup In the “ Wi-Fi Protect Setup ”, you can setup the Wi-Fi network more ea sily and secure. . There are two methods for you: Pin Input Config (PIN) Metho d & Push Button Con fig (PBC) Method ”. Select one of following metho ds to setup your AP.
17 configuration setup using PIN configu ration method or PBC configuration method through an internal or external Registrar. Pin Input Config (PIN): Start to add to Registra r using PIN configuration m ethod. IF STA Registrar, remember that enter PIN Co de read from you Enrollee before starting PIN.
18 You will see the basic configuration menu of the AP function: 4.2 General SSID: The SSID is the uniqure name shared among all points in your wi reless network. The name must be identical for all devices and points attempting to connect to the same netwo rk.
19 shows the current SSID se tting of the Wireless USB adapter. BSSID: It shows the current BSSID’s MAC address. AID: Raise value by current conn ection. MAC Address: The station MAC address of cu rrent connection Life Time: The status of current connection.
20 If you want to know detailed information about ho w your software access point works, you can view the statistics of the access point. You can click “ Reset ” button to reset all counters to zero. 4.5 ICS The Internet Connection Sharing ( ICS ) function allows wireless clients to share a single internet connection.
21.
An important point after buying a device Lindy IEEE 802.11n (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lindy IEEE 802.11n yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lindy IEEE 802.11n - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lindy IEEE 802.11n you will learn all the available features of the product, as well as information on its operation. The information that you get Lindy IEEE 802.11n will certainly help you make a decision on the purchase.
If you already are a holder of Lindy IEEE 802.11n, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lindy IEEE 802.11n.
However, one of the most important roles played by the user manual is to help in solving problems with Lindy IEEE 802.11n. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lindy IEEE 802.11n along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
