Instruction/ maintenance manual of the product 51143 Lindy
Go to page of 2
MANL-SIL3124-EN-2005101 0 U s e r M a n u a l Introduction The Silicon Image Sil3124 Serial A T A I/II to PCI Host Controller Card is a high performance, server class storage interface device, which provid es a multi-port SA T A connec tivity to minimize the host overhead and the host to device latency .
Setup a RAID set with tw o hard disks installed Caution: all data in the hard disks will be lost in the foll owing procedures 1. Turn on the computer. 2. When the BIOS on the controller card is active, press Ctrl-S or F4 to enter into BIOS menu. 3. Choose “ Create RAID set ” in the Main Menu.
An important point after buying a device Lindy 51143 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lindy 51143 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lindy 51143 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lindy 51143 you will learn all the available features of the product, as well as information on its operation. The information that you get Lindy 51143 will certainly help you make a decision on the purchase.
If you already are a holder of Lindy 51143, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lindy 51143.
However, one of the most important roles played by the user manual is to help in solving problems with Lindy 51143. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lindy 51143 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
