
User Manual English

LINDY No. 32699
www.LINDY.com
For Home and Office Use Tested to Comply with FCC Standards
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (FEB 2004)



6.4 Login Web Admin 32
6.4.1 System Status 33
6.4.2 Network Setup 33
6.4.3 Projection Setup 36
6.4.4 Change Passwords 37
6.4.5 Reset to Default 37
6.4.6 Firmware Upgrade 38
6.4.7 Reboot System 39
6.4.8 Logout 40

WPS is a must-have device for your meeting room! It turns your existing "wired"
projector into a "high-end wireless" projector. With the revolutionary
Plug-and-Show, 4-to-1 split screen and PDA wireless projection features, WPS makes every of your presentation and meeting efficient and successful.
Plug & Show
With the accompanied Plug & Show USB Token, wireless presentation becomes easy!
Just link your PC/Laptop to WPS (through WLAN or Ethernet), plug the token into a
USB port, and in seconds, your screen will be wireless projected to the connected projector!
4-to-1 Split Screen Projection
With this 4-to-1 split screen feature, up to four PC screens can be projected to one
projector in the same time. Thus you can easily do side-by-side comparison from four PC / PDAs to increase meeting productivity!
PDA wireless Projection
You don't have to bring the laptop for business presentation anymore. Just
connect your PDA phone to WPS through WiFi, and start your professional and stylish presentation right away!
WPS supports Conference Control function for easily moderating the conference.
The conference moderator can control projection from connected PCs through a
web-based control page. So you can streamline your meeting/presentation to be
more fluent and in order.
WPS supports Magnifier feature for codec-free video clips watching experience. By
drag and drop the video into magnifier capture region, you will be able to watch the
video on big screen with best experience.
Conference control · Magnifier feature

Macintosh(Mac) wireless Projection
WPS supports Mac client connected and projected wirelessly. By launching the Mac
client software that stored in accompanied USB token, WPS provide the same experience to Mac user to utilize the wireless presentation feature.
token to a USB port, and hassle free presentation can be started in seconds. ■ 4-to-1 split screen projection! Turn one projector into four, increase
meeting productivity right away. ■ PDA wireless projection! PC-less stylish presentation becomes possible!
function to protect presentation contents and keep good security to office
networks. ■ Provide magnifier feature to enlarge small video region to playback
with full screen. ■ Provide media playback feature, support music and video streaming.

power.

♦ When Projector shows the default menu on the screen as below, it
indicates the WPS box is ready now.

can enter the IP address to access the WPS web home page.
♦ The default IP address of WPS is 192.168.100.10 or refers to the IP
address shown on the left corner of projector screen.


or ”Windows Mobile 5.0” and execute the installation program.
♦ After installing the program, you will see the WPS shortcut on the PC
screen.



♦ You can see the login code on the projector screen



3.1 Starting Program
After you download WPS Windows program via web page successfully, then follow
below steps to start.
screen.
Searching for WPS box

WPS box is founded and enter login code to start.


Tab Control Area for Screen

Control Area for Streaming

Click the “Play” button for full or split screen, you can project the main screen on to
the display immediately, click the “Pause” button, you can freeze you projection
screen, and click the “Stop” button to stop projecting your screen.
to enable the magnifier feature. System will enlarge and playback the
image within the red rectangle to full screen in higher frame rate.
Ps1. To enable this feature, you need to install Magnifier component first which is
stored in the USB token.
Click

Ps2. You need to draw and resize the video size to fit into this rectangle.


Click the “Video Tab” to switch to Video Mode, choose a video/audio file, then it will
stream the original file to playback on the screen.


3.7.1 Show Login Code
Click “Show Login Code”, it will display the login code on the right-upper of desktop
and close it automatically after 10 seconds. You can also click on the area to close
this window manually.



to open function menu and select “Web Admin” management web page.
The web page detailed functions will be described on next chapter.

Click

Click “Search Server” to re-search the WPS again.

Click “Magnifier option” to change the aspect ratio of captured video region with
magnifier feature.



Click the “Projection Quality”, choose “Normal” for faster projection speed with lower
screen image quality, and “Best” for clear screen image quality but slower projection
speed.

Click the “Projection Source”, you can select to project the main screen of desktop or
the virtual extended screen.
PS. This function is only supported on Windows XP and need to install another
virtual display driver first.



Click “Profile Manager”, you can click “save current as” to save current connection
configuration into Profile, or click the “Profile Manager” to add, delete or modify
current profiles.


Save Current as
Click the “Save current as”, it will save your current connection into profile for
future quick connect.

Click the “Manage Profile”, you can see current profile, add or delete the profile,
and edit the existing profile.

Manage Profile

Click”Auto WiFi Connect” to enable the AWZC function, this function can save the
WiFi connection steps.

To make the highest projection performance, application will turn the PC’s windows
power scheme from current settings to “highest performance”, however, you can
click the “Auto Power Manager” to enable or disable this function and restore you
power scheme immediately.



Click the “Hide UI”, you can choose to hide or display the application control panel
from projection screen.


Click the “Advanced Screen Capture”, you will be able to see tip windows and other
layered windows (include the main UI) on the connected display.

However, the mouse cursor may blink from time to time when you are projecting

Click the” Repeat”, you can choose to playback current video/audio file repeat or
not.

your PC screen!

Click “Make PnS Token” to make a USB WPS Token, you can insert a USB thumb
drive and follows the wizard to make the Token.





Click the “Copy Application to desktop”; it will copy the application to your desktop
immediately even you don’t have the system privilege

Click “About” to show system information. It includes Client version, IP address
and other information.



Click “Exit” to exit this application. It will stop current playing status and close the
application immediate.


To project your PDA screen with WPS, please follow the steps:
software for PDA version.
♦ The default IP address is 192.168.100.10.
♦ Or, refer to the IP address which shown on the projector screen.



5.1 Launch Application




Tab Control Area for Screen
Control Area for Streaming
Click the “Play” button for full or split screen, you can project the main screen on to
the display immediately, click the “Pause” button, you can freeze you projection

screen, and click the “Stop” button to stop projecting your screen.
Project to Split #1
Project to Split #2
Project to Split #3
Project to Split #4
Click the “Video Tab” to switch to Video Mode, choose a video/audio file, then it will
stream the original file to playback on the screen.

6. Web Management
6.1 Home Page
screen.

execute the installation program.
complete.
program. You just press “Unblock” button to continue installation.

swapping and each participant can show their presentation easily.


connected to WPS box.
Address”.
, Play Split #1
, Play Split #4




Click [System Status], shows current system status.
Versions:
Network Status:
Connection Status:
There are many kinds of operating configurations as below.


< Auto-Configuration Network Setup> The default setting of the WPS box is DHCP client. When the WPS box is connected to a
LAN that already has a DHCP server present, the WPS box takes an IP address assigned
to it by the server. When the WPS box is connected to a LAN that does not have a DHCP
server, the WPS box becomes the DHCP server in the network.
♦ You can select “obtain IP address automatically” or “Use the following IP address” ♦ IP Address: The default value is 192.168.100.10.
♦ You can select “auto(Enable/Disable DHCP Server” or “Disable”) ♦ Start IP: The start IP address of DHCP Server.
< IP Setup> · <DHCP Server Setup>

♦ Region: default value is “Worldwide”.
♦ SSID: SSID string, max. Length is 32 bytes.
WPS, it will scan all of wireless channel and select clear one channel
automatically.
128bit in ASCII or HEX string.
encryption mode you selected. < Gatekeeper>
Gatekeeper is designed for ensuring the enterprise network security within WPS
♦ All Block can block Guest Users(through wireless) to access all office
♦ All Allow can pass Guest Users(through wireless) to access all office
♦ Internet Only can block Guest Users (through wireless) from office network
(LAN) but still reserve internet connection capability.
<Cancel>: press button to abort action.


Click [Projection Setup] button
♦ <Resolution>: 1024x768, 1280x768 and 800x600.
♦ <Color Depth>: provide WPS output with 16bit or 32 bit color depth.
It depends on your PC settings.
Hz and 75Hz to suit for different kinds of projectors.
following code” to set a specified 4-characters Number. ♦ <Apply>:Confirmation and Save modifications


Click [Change Password] button, to change password value.
each category.
♦ <Confirm New Password>: double confirm new password.
♦ <Apply>: Confirmation and Save modifications.

Click [Reset to Default] button to restore factory default settings.
<Apply>: Confirmation and action.

*** Another way to restore Factory Default Settings, Follow below
procedures.


Click [Firmware Upgrade] button to upgrade firmware.



otherwise will cause your Box doesn’t work and have to return device to your vendor
for fixing.

Click [Reboot System] button, to restart system
♦ <Reboot>: reboot system automatically.



Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission
regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation
CE Statement, EMC Compatibilty
This device complies with EN Standards EN55022 and EN55024 according to the relevant EC EMC Directive. It
must be used with shielded cables only to maintain EMC compatibility.
Dieses Produkt entspricht den einschlägigen EMV Richtlinien der EU und darf nur zusammen mit abgeschirmten
Kabeln verwendet werden.
LINDY gewährt für dieses Produkt über die gesetzliche Regelung hinaus eine zweijährige Herstellergarantie ab
Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der LINDY Website aufgelistet bei den
AGBs.
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste
FCC Warning · LINDY Herstellergarantie

electrical and electronic equipment. The wheelie bin symbol shown indicates that this product must not be
disposed of with household waste. Instead the product must be recycled in a manner that is environmentally
friendly. For more information on how to dispose of this product, please contact your local recycling centre or
your household waste disposal service. Each individual EU member state has implemented the WEEE
regulations into national law in slightly different ways. Please follow your national law when you want to dispose
of any electrical or electronic products.
More details can be obtained from your national WEEE recycling agency.
Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die Verschrottung und das
Recycling von Elektro- und Elektronikprodukten geschaffen. Diese wurden von der Bundesregierung im
Elektro- und Elektronikgerätegesetz – ElektroG in deutsches Recht umgesetzt. Dieses Gesetz verbietet vom
24.März 2006 an das Entsorgen von Elektro- und Elektronikgeräten über die Hausmülltonne! Diese Geräte
müssen den lokalen Sammelsystemen bzw. örtlichen Sammelstellen zugeführt werden! Dort werden sie
kostenlos entgegen genommen. Die Kosten für den weiteren Recyclingprozess übernimmt die Gesamtheit der
Gerätehersteller.
1st Edition, September 2009
Germany / Deutschland · LINDY No 32699
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.