Instruction/ maintenance manual of the product 32416 Lindy
Go to page of 8
I I P P o o w w e e r r C C o o n n t t r r o o l l 8 8 U s e r G u i d e English LINDY No. 32416 www.lindy.com © LINDY ELECTRONICS LIMITE D & LINDY -ELEKTRONIK GMBH - FI RST EDITION (May 2005).
1. CONNECTION Connect the IPower Control unit to the mains and to your Ethernet network. There are eight LEDs at the front of the unit which relate to the s witching state of the ports. When using the IPower Control for the first time all LEDs wi ll simultaneously light up red.
3. SWITCHING VIA ETHERNET Login to the website of the IPower Control , http:// “IP Address of IPower Control” (e.g. 192.168.0.2). You may need to enter a password (see section 6) . Now you can choose a port in order to reset it or switch it directly.
5. PORT CONFIGURATION The ports can be selected individually from t he roll-up menu at the configuration site. The following settings can be modified for each port: Label A name with a maximum of 15 characters can be entered here.
6. NETWORK CONFIGURATION The following settings can be modified in the configuration menu: Device Name A name with a maximum of 15 characters can be allocated here. IP Settings The IP settings of the IPower Control can be modified here. HTTP Port If required, the port number of the internal web server can be allocated here.
7. OPERATING MODES The IPower Control can be started in two ways: Boot Mode To start the IPower Control in boot mode, the button at the fr ont must be pushed for at least two seconds when restarting the unit.
10. DEFAULT SETTINGS In order to restore the default settings the IPower Control must be started in boot mode (see section 7). Launch IPCnet_conf.exe . After the program has opened, all IPower Control units which are on the net work will be listed on the left hand side of the program window.
12. FAQs Connection The IPower Control is connected to a netw ork but... ...the LEDs do not illuminate Please check the connection to the electrical circuit ...the green LED at the LAN socket does not illuminate Please check the network connection ...
An important point after buying a device Lindy 32416 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lindy 32416 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lindy 32416 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lindy 32416 you will learn all the available features of the product, as well as information on its operation. The information that you get Lindy 32416 will certainly help you make a decision on the purchase.
If you already are a holder of Lindy 32416, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lindy 32416.
However, one of the most important roles played by the user manual is to help in solving problems with Lindy 32416. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lindy 32416 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
