Instruction/ maintenance manual of the product 10CH01S-00 Linak
Go to page of 2
PRODUCT DA T A SHEET BA TTER Y CHARGER CH01 Features: • For charging the batteries of CB08-XA and all jumbo types, directly connected to the control box or via the handset HB40A (must not be used with BA18) • Mains: 100 - 240 V AC / 50-60 Hz switch mode power supply • Charging voltage: 27.
Specifications subject to change without prior notice. It is the responsibility of the product user to determine the suitability of LINAK A/S products for a specific application. LINAK will at point of delivery replace/repair defective products covered by the warranty if promptly returned to the factory .
An important point after buying a device Linak 10CH01S-00 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Linak 10CH01S-00 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Linak 10CH01S-00 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Linak 10CH01S-00 you will learn all the available features of the product, as well as information on its operation. The information that you get Linak 10CH01S-00 will certainly help you make a decision on the purchase.
If you already are a holder of Linak 10CH01S-00, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Linak 10CH01S-00.
However, one of the most important roles played by the user manual is to help in solving problems with Linak 10CH01S-00. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Linak 10CH01S-00 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
