Instruction/ maintenance manual of the product 850iR LightSpeed Technologies
Go to page of 30
LightSPEED 850iR Classr oom Amplification System User Manual LightSPEED T echnologies, Inc. 11509 SW Herman Rd T ualatin, OR 97062 800.732.8999 www .lightspeed-tek.
USER NOTES S AFETY INSTRUCTIONS 1. Read Instructions— All the safety and operation instructions should be read befor e this LightSPEED product is operated. 2. Retain Instructions— The safety and operating instructions should be k ept for future r efer ence.
USER NOTES 850iR User Manual | 24 850iR User Manual 850iR User Manual LT -7 1 A CH B OFF ON TURN ON THE 850iR TURN ON THE LIGHTMIC Remove the LightMic from the charger and place it ar ound your neck. Adjust the neck strap so the top of the microphone r ests just below your collarbone.
850iR CLASSROOM AMPLIFICA TION SYSTEM T ABLE OF CONTENTS Safety Instructions Daily Use Instructions 850iR Classroom Amplification System System Components System Installation Unpacking Y our System L.
USER NOTES R ecord your system serial numbers and purchase infor mation. This is helpful when ordering additional components, accessories, and/or warranty service.
850iR User Manual | 2 21 | 850iR User Manual 850iR User Manual 850iR User Manual LT - 7 1 850iR Infrared Receiver/Amplifier L T -71 LightMic™ T ransmitter Charging Cradle SR-70F Infrared Sensor Sen.
SYSTEM INST ALL A TION Unpacking Y our System Location of the R eceiver/Amplifier IR Sensor Placement Place the 850iR on a flat surface lik e a bookcase, countertop or optional Light- SPEED wall shelf (part#AC-800WB). • Select a location that is close to a standard wall electrical outlet.
1. Lift the ceiling tile nearest the grid rail in your desir ed sensor location. Guide one side of the C-clip over one edge of the grid rail. P roviding firm support to the back of the grid rail with one hand (to prevent bending), firmly and car efully snap the second side of the C-clip over the edge of the rail.
FRONT P ANEL CONTROLS LES 850iR Classr oom Amplification System 1. POWER Switch/POWER Indicator: This switch is used to turn the 850iR ON (switch up), or OFF (switch down). When the POWER switch is in the ON position, the POWER light will glow red. 2.
850iR User Manual | 6 17 | 850iR User Manual 850iR User Manual 850iR User Manual LES 850iR Classr oom Amplification System 6 5. B VOL UME: Controls the volume level of the optional second microphone that is switched to Channel B. R otating the knob clockwise increases output level.
850iR User Manual LES 850iR Classr oom Amplification System OPER A TING THE OPTIONAL HM-70 HANDHELD MIC ON OFF MUTE (Center Position) 7 | 850iR User Manual 850iR User Manual |16 850iR User Manual 1. SPEAKER OUTPUTS (1-4): These binding post connectors are used to connect the 850iR to the loudspeak ers.
OUTPUT TO PERSONAL FM TR ANSMITTER SPEAKER OUTPUTS 250 4 00 70 0 1K 1K4 2 K5 4K 6 K +1 0 0 -1 0 OFF OFF OFF OFF ON ON ON ON VOL. ADJ. ALD OU T AUX OU T VOL.
LES 850iR Classroom Amplification System 1 LES 850iR Classroom Amplification System Below are instructions on how to connect an e xternal audio device lik e a TV/VCR, CD/DVD or computer . INPUT FROM EX TERNAL AUDIO EQUIPMENT 3 9 | 850iR User Manual 850iR User Manual | 14 850iR User Manual 850iR User Manual 1.
850iR User Manual 850iR User Manual | 10 13 | 850iR User Manual 850iR User Manual 2. Ensure speak er wire connections are secure and not frayed. Each speaker switch located to the right of the speaker jack should be in the “ON” position. 3. Connect the charging cables to yellow char ging jacks labeled “CHARGERS.
850iR User Manual SYSTEM OPER A TION TURNING THE SYSTEM ON 4. While speaking in a normal voice, increase the A V OLUME level until your voice is barely audible. Remember! This equipment is designed to supplement and distribute the end user’s voice so they are able to speak at a conversational tone.
850iR User Manual SYSTEM OPER A TION TURNING THE SYSTEM ON 4. While speaking in a normal voice, increase the A V OLUME level until your voice is barely audible. Remember! This equipment is designed to supplement and distribute the end user’s voice so they are able to speak at a conversational tone.
850iR User Manual 850iR User Manual | 10 13 | 850iR User Manual 850iR User Manual 2. Ensure speak er wire connections are secure and not frayed. Each speaker switch located to the right of the speaker jack should be in the “ON” position. 3. Connect the charging cables to yellow char ging jacks labeled “CHARGERS.
LES 850iR Classroom Amplification System 1 LES 850iR Classroom Amplification System Below are instructions on how to connect an e xternal audio device lik e a TV/VCR, CD/DVD or computer . INPUT FROM EX TERNAL AUDIO EQUIPMENT 3 9 | 850iR User Manual 850iR User Manual | 14 850iR User Manual 850iR User Manual 1.
OUTPUT TO PERSONAL FM TR ANSMITTER SPEAKER OUTPUTS 250 4 00 70 0 1K 1K4 2 K5 4K 6 K +1 0 0 -1 0 OFF OFF OFF OFF ON ON ON ON VOL. ADJ. ALD OU T AUX OU T VOL.
850iR User Manual LES 850iR Classr oom Amplification System OPER A TING THE OPTIONAL HM-70 HANDHELD MIC ON OFF MUTE (Center Position) 7 | 850iR User Manual 850iR User Manual |16 850iR User Manual 1. SPEAKER OUTPUTS (1-4): These binding post connectors are used to connect the 850iR to the loudspeak ers.
850iR User Manual | 6 17 | 850iR User Manual 850iR User Manual 850iR User Manual LES 850iR Classr oom Amplification System 6 5. B VOL UME: Controls the volume level of the optional second microphone that is switched to Channel B. R otating the knob clockwise increases output level.
FRONT P ANEL CONTROLS LES 850iR Classr oom Amplification System 1. POWER Switch/POWER Indicator: This switch is used to turn the 850iR ON (switch up), or OFF (switch down). When the POWER switch is in the ON position, the POWER light will glow red. 2.
1. Lift the ceiling tile nearest the grid rail in your desir ed sensor location. Guide one side of the C-clip over one edge of the grid rail. P roviding firm support to the back of the grid rail with one hand (to prevent bending), firmly and car efully snap the second side of the C-clip over the edge of the rail.
SYSTEM INST ALL A TION Unpacking Y our System Location of the R eceiver/Amplifier IR Sensor Placement Place the 850iR on a flat surface lik e a bookcase, countertop or optional Light- SPEED wall shelf (part#AC-800WB). • Select a location that is close to a standard wall electrical outlet.
850iR User Manual | 2 21 | 850iR User Manual 850iR User Manual 850iR User Manual LT - 7 1 850iR Infrared Receiver/Amplifier L T -71 LightMic™ T ransmitter Charging Cradle SR-70F Infrared Sensor Sen.
USER NOTES R ecord your system serial numbers and purchase infor mation. This is helpful when ordering additional components, accessories, and/or warranty service.
850iR CLASSROOM AMPLIFICA TION SYSTEM T ABLE OF CONTENTS Safety Instructions Daily Use Instructions 850iR Classroom Amplification System System Components System Installation Unpacking Y our System L.
USER NOTES 850iR User Manual | 24 850iR User Manual 850iR User Manual LT - 7 1 A CH B OFF ON TURN ON THE 850iR TURN ON THE LIGHTMIC Remove the LightMic from the charger and place it ar ound your neck. Adjust the neck strap so the top of the microphone r ests just below your collarbone.
USER NOTES S AFETY INSTRUCTIONS 1. Read Instructions— All the safety and operation instructions should be read befor e this LightSPEED product is operated. 2. Retain Instructions— The safety and operating instructions should be k ept for future r eference.
LightSPEED 850iR Classr oom Amplification System User Manual LightSPEED T echnologies, Inc. 11509 SW Herman Rd T ualatin, OR 97062 800.732.8999 www .lightspeed-tek.
An important point after buying a device LightSpeed Technologies 850iR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LightSpeed Technologies 850iR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LightSpeed Technologies 850iR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LightSpeed Technologies 850iR you will learn all the available features of the product, as well as information on its operation. The information that you get LightSpeed Technologies 850iR will certainly help you make a decision on the purchase.
If you already are a holder of LightSpeed Technologies 850iR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LightSpeed Technologies 850iR.
However, one of the most important roles played by the user manual is to help in solving problems with LightSpeed Technologies 850iR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LightSpeed Technologies 850iR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
