Instruction/ maintenance manual of the product IS:1102P1 Lightolier
Go to page of 2
1. FRAME-IN (FIG. A) Fasten MOUNTING FRAME to wood joist. Line-up bottom edge of ADJUST ABLE MOUNTING BAR with bottom of wood joist (Fig. E). Wire to supply leads. White fixture lead to neutral supply lead. Black fixture lead to hot (120V) supply lead.
1. CUT OPENING (FIG. A) Use MOUNTING FRAME opening as template. 2. WIRE-IN (FIG. B) Wire to supply leads. (Use built-In Cable Clamp in J-Box for non- metallic sheathed cable (Romex) or armored cable (BX)). 3. PUT THROUGH (FIG. C) a. Remove ADJUST ABLE MOUNTING BARS.
An important point after buying a device Lightolier IS:1102P1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lightolier IS:1102P1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lightolier IS:1102P1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lightolier IS:1102P1 you will learn all the available features of the product, as well as information on its operation. The information that you get Lightolier IS:1102P1 will certainly help you make a decision on the purchase.
If you already are a holder of Lightolier IS:1102P1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lightolier IS:1102P1.
However, one of the most important roles played by the user manual is to help in solving problems with Lightolier IS:1102P1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lightolier IS:1102P1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
