Instruction/ maintenance manual of the product C4P20A Lightolier
Go to page of 2
14 1/4" Adjustment (mounting bars included) 13 3/4" to 24" (IC AirSeal ® ) C4AIC 10" Adjustment (mounting bars included) 13 3/4" to 24" O.A. 20 1/4" 8 1/2" 9 1/2" Dia. O.A. 14 3/8" 7 3/4" 9 1/2" Dia.
(FC) is initial footcandles at center of beam.Beam length (L) and beam width (W) are to where the candlepower is reduced to 50% of the center beam candlepower . CBCP is center beam candlepower . (C) is distance to the center of the beam. Lamp data shown is typical, and is based on bare lamp photometrics.
An important point after buying a device Lightolier C4P20A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lightolier C4P20A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lightolier C4P20A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lightolier C4P20A you will learn all the available features of the product, as well as information on its operation. The information that you get Lightolier C4P20A will certainly help you make a decision on the purchase.
If you already are a holder of Lightolier C4P20A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lightolier C4P20A.
However, one of the most important roles played by the user manual is to help in solving problems with Lightolier C4P20A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lightolier C4P20A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center