Instruction/ maintenance manual of the product C12 Lightolier
Go to page of 2
a Genlyte company 631 Airport Road, Fall River, MA 02720 FIG. 4 INSTRUCTIONS FOR INSTALLING C12E28V SERIES DOWNLI GHT REFLECTOR TRIM 1. Attach SOCKET CUP to REFLECTO R ASSEMBLY by aligning (3) SCREWS with key slots in REFLECTOR NECK, then tighten screws.
READ AND UNDERSTAND THESE INSTRUCTI ONS BEFORE INSTALLING FIXTURE This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local el ectrical inspector before installation.
An important point after buying a device Lightolier C12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lightolier C12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lightolier C12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lightolier C12 you will learn all the available features of the product, as well as information on its operation. The information that you get Lightolier C12 will certainly help you make a decision on the purchase.
If you already are a holder of Lightolier C12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lightolier C12.
However, one of the most important roles played by the user manual is to help in solving problems with Lightolier C12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lightolier C12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center