Instruction/ maintenance manual of the product 1002 Lightolier
Go to page of 2
1. FRAME-IN (FIG. A) Fasten MOUNTING FRAME to wood joist. Line-up bottom edge of ADJUST ABLE MOUNTING BAR with bottom of wood joist (Fig. E). Wire to supply leads. (For Cable, use built-in Cable Clamp in J-Box. NOTE: ADJUST ABLE MOUNTING can be extended for 24” mounting.
1. CUT OPENING (FIG. A) Use MOUNTING FRAME opening as template. 2. WIRE-IN (FIG. B) W ire to supply leads. (For Cable, use built-in Cable Clamp in J-Box.) 3. PUT THROUGH (FIG. C) a. Remove ADJUST ABLE MOUNTING BARS. b. Break off BRIDGE on MOUNTING FRAME as shown in FIG.
An important point after buying a device Lightolier 1002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lightolier 1002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lightolier 1002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lightolier 1002 you will learn all the available features of the product, as well as information on its operation. The information that you get Lightolier 1002 will certainly help you make a decision on the purchase.
If you already are a holder of Lightolier 1002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lightolier 1002.
However, one of the most important roles played by the user manual is to help in solving problems with Lightolier 1002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lightolier 1002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
