Instruction/ maintenance manual of the product TITAN D100 Light & Motion
Go to page of 14
Standard W arranty Light & Motion provides a limited warranty to the original pur chaser against all defects in original workmanship and material, under normal use and service, for one year from t.
T able of Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 First Time Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
First Time Use All Light and Motion housings are pr essure tested prior to shipping. How ever , there could be unseen damage fr om shipping. A test dive without the camera in the housing is highly r ecommended. After the initial dive with just the housing, make the f ollowing checks.
Installing the D100 1. Remov e the rear plate by holding both latch locks in and simultaneousl y rotating both latches down and r earward of the housing body (Fig. 9). 2. Remov e the camera tray . Press the Camera T ra y Latch to the left and pull the tra y backward out of the housing (Fig 10).
T itan D100 Controls T op Controls Mode Dial (Fig 17): Accesses the camera’ s Mode Dial. Use the Mode Dial to select camera’ s exposure mode. Use the Mode Dial to select the following settings: ISO - White Balance - Image Size - Image Quality - AF Area Mode On Dial (Fig.
Front Controls Shutter Lev er : Accesses the camera’ s shutter button (Fig. 27). The Shutter Lev er also activates the camera’ s auto focus when depressed half wa y . When depressed full y , the camera will tak e a photo. Focus Mode Selector (Fig.
Attaching Strobes The Titan housing is supplied with two 1” Base Ball Mounts (Fig. 31). Most ball style clamps for str obe arms can readily attach to these base mounts (Fig. 32). Installing Bulkheads 1. Remove bulkhead cap by inserting a coin into the slot in the cap and turning counter clock wise.
Programming ROC R OC can only function successfully by knowing the type of str obe(s) being used. It is necessar y to pr ogram R OC prior to using the Titan underwater . Once R OC is programmed it will ne ver ha ve to be r eprogrammed unless a diff erent model str obe is used.
(Fig. 33) (Fig. 34) LR OFF + (Fig. 35) LR OFF + (Fig. 36) LR OFF + (Fig. 37) (Fig. 38) LR OFF + (Fig. 39) F = Empty – = Ik elite 400 -1 = Ikelite 200 – = Ik elite DS-125 -2 = Ikelite 100 – = Ik .
LR OFF + (Fig. 40) LR OFF + (Fig. 41) LR OFF + (Fig. 42) FOCUS + SUB + SUB (Fig. 43) FOCUS + SUB + SUB (Fig. 44) (Fig. 45) FOCUS + SUB + SUB (Fig. 46) FOCUS + SUB + SUB (Fig. 47) Press and hold to deactiveate str obe(s). Press and hold both buttons to enter “AEL-AFL ” mode .
(Fig. 48) (Fig. 49) (Fig. 50) (Fig. 51) (Fig. 52) (Fig. 53) (Fig. 54) Installing Mod Light Installing Sunray Mod Light (Optional) 1. Identify the appr opriate par ts in the Titan mounting kit included with the Mod Light. 2. Titan Kit includes the following.
(Fig. 55) (Fig. 56) (Fig. 57) (Fig. 58) (Fig. 59) Replacing Handle Thread Rings The Handle Thread Rings that attach the R OC handles (Fig. 57) to the Titan housing are designed to absorb shock should the Titan be dropped or fall. If the Handle Thread Rings experience extreme pr essure, they will br eak and minimize potential damage to the Titan.
After Diving Care 1. Immediately submerge the housing in fr esh water . While in fresh water , work the dials, lev ers and all the buttons, to work an y remaining salt water out of the housing. 2. Remov e housing from rinse tank and then simply tow el dr y .
Returning Products for Care W e highly recommend a factory annual ser vice to maintain prop- er operation of your Titan Housing 1) Befor e returning your Light & Motion pr oduct for car e , please call or email our service department for a RMA number .
An important point after buying a device Light & Motion TITAN D100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Light & Motion TITAN D100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Light & Motion TITAN D100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Light & Motion TITAN D100 you will learn all the available features of the product, as well as information on its operation. The information that you get Light & Motion TITAN D100 will certainly help you make a decision on the purchase.
If you already are a holder of Light & Motion TITAN D100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Light & Motion TITAN D100.
However, one of the most important roles played by the user manual is to help in solving problems with Light & Motion TITAN D100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Light & Motion TITAN D100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
