Instruction/ maintenance manual of the product TFP3000 Lifebreath
Go to page of 4
1 TFP 4 mounting brackets 4 hanging straps 2 Red, 7” collar connections 4 8/32” X 3/4” sheet metal screws 8 8/32” X 3/8” sheet metal screws 4 pieces of mounting foam 1 set of installation operating instructions 1 warranty card The TFP is equipped with a standard power supply, on a 5’ 5” cable.
2 TFP Directly Connected to Forced Air Heating System 1. Install 7” port collar (provided) on top and bottom of TFP (Fig. 1). Use (4) 8/32” X 3/8” screws (provided). 2. Remove protective backing from pieces of foam and stick them to the 4 corners of the TFP on the side being mounted against the plenum.
TFP Connected to Heat Recovery V entilator LOCATION The TFP should be located in the main trunk of the fresh air to house line, after the Heat Recovery Ventilator (HRV) and before any branch lines. (Fig. 3) MOUNTING 1. Locate mounting bolts (4) on side of TFP cabinet for vertical hanging (Fig.
TFP Independent Installation No HRV , Radiant Heating System LOCATION 1. A TFP is usually installed in a basement area where air flow noise will be negligible to the occupants. 2. A central location between the clean air supply grille and return grille is recommended.
An important point after buying a device Lifebreath TFP3000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Lifebreath TFP3000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Lifebreath TFP3000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Lifebreath TFP3000 you will learn all the available features of the product, as well as information on its operation. The information that you get Lifebreath TFP3000 will certainly help you make a decision on the purchase.
If you already are a holder of Lifebreath TFP3000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Lifebreath TFP3000.
However, one of the most important roles played by the user manual is to help in solving problems with Lifebreath TFP3000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Lifebreath TFP3000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
