Instruction/ maintenance manual of the product 93S Life Fitness
Go to page of 8
93S, 90S Stairclimbers Assembly Instructions.
Congratulations... and welcome to the world of The following Parts Identification Listing and the step by step assembly procedures have been assembled to make the set-up of the Stairclimber as quick and easy as possible.
I MPORTANT S AFETY I NSTRUCTIONS ! ⇒ DO NOT locate the Stairclimber outdoors, near swimm ing pools, or in areas of high humidity. ⇒ DO NOT operate your Stairclimber if it has been dropped, damaged, or even partially im mersed in water. If this occurs, contact Life Fitness Customer Support Services at the number in the Operation Manual .
T OOLS R EQUIRED FOR A SSEMBLY... Phillips Screw driver, T27 Torx Screwdriver, Socket Set P ARTS D ESCRIPTION 1 Hex Head Bolt Qty: 2 3/8 – 16 x 3 2 Lock Nut Qty: 2 3/8 – 16 3 Hex Head Bolt Qty: 2 5/16 – 18 x 1.500 4 Torx Cap Screw (Model 93S) Qty: 4 1/4 – 20 x .
10 20 C D B 20 10 E B 2 1 15 F 10 D H 1. Before proceeding, familiarize y ourself with the parts of the Stairclimber and make sure that you have received all the items described in the Parts List. 2. Locate the MONOCOLUMN (#10). Position the MONOCOLUMN SHROUD (#20) onto the MONOCOLUMN as shown.
14 15 F 13 10 6 J 19 8 15 F 8 16 J 19 8 15 F 8 16 4. (Model 93S / 90S International) Locate the TELEMETRY CABLE (#17). Feed the 3-PIN CONNECTOR (3P) end of the cable through the front of the HANDLEBAR ASSEMBLY (#15). The cable must be routed down the HANDLEBAR BRACKET TUBE (F) and back up the top of the MONOCOLUMN (#10).
15 4 12 K 3 5 10 D 5 11 9 L 18 K 7. Locate one of the VERTICAL HANDRAILS (#12). Carefully insert the top of the VERTICA L HANDRAIL into the user right end of the HANDLEBAR ASSEMBLY (#15). Align the mounting holes. Secure the VERTICAL HANDRAIL to the HANDLEBAR ASSEMBLY using two MOUNTING SCREWS (#4).
PRE-OPERATION CHECKLIST 9 Ensure that all fasteners are tight. 9 M ake sure the Stairclimber is properly leveled and stable. (Refer to the Operation Manual) 9 Ensure that the Leveler Jam Nuts are tight. (Refer to the Operation Manual) 9 Read the entire Operation manual before using the Stairclimber.
An important point after buying a device Life Fitness 93S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Life Fitness 93S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Life Fitness 93S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Life Fitness 93S you will learn all the available features of the product, as well as information on its operation. The information that you get Life Fitness 93S will certainly help you make a decision on the purchase.
If you already are a holder of Life Fitness 93S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Life Fitness 93S.
However, one of the most important roles played by the user manual is to help in solving problems with Life Fitness 93S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Life Fitness 93S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
