Instruction/ maintenance manual of the product SKESF 4240 Liebherr
Go to page of 12
Operating instructions Upright refrigerator 130614 7085638 - 01 K /KP/ KPesf/ SKes/ SKesf ... 3.
Contents 1 Appliance at a glance............................................ 2 1.1 Description of appliance and equipment.................. 2 1.2 Range of appliance use............................................ 2 1.3 Conformity......................
Use the appliance solely in a domestic type of environment. All other applications are inadmis- sible. Foreseeable misuse The following applications are expressly prohibited: - Storage and cooling of .
- This appliance can be used by children of 8 years old and over, and also by persons with restricted physical, sensory or mental capacity or lack of experience and knowl- edge, if they are supervised or have been instructed on safe use of the appliance and understand the resulting risks.
(3) Temperature display 3.2 Temperature display The following are displayed in normal operation: - the set cooling temperature 4 Putting into operation 4.1 Transporting the appliance CAUTION Risk of injury and danger of damage as a result of incorrect transport! u Transport the appliance in a packed condition.
u Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustable- height feet (A) and using a spirit level. u Then support the door: Extend the adjustable foot at the turn hinge (B) until it rests on the floor and then make a further 90° turn.
Fig. 7 u Lift the stopper Fig. 7 (33) out of the door bearing bush and transfer it. u Dismantle the door handle Fig. 7 (32) , stoppers Fig. 7 (33) and pressure plates* Fig. 7 (34) and transfer to the opposite side. u When fitting the pressure plates on the opposite side, make sure they snap properly into place.
The packaging is made of recyclable materials: - corrugated board/cardboard - expanded polystyrene parts - polythene bags and sheets - polypropylene straps - nailed wooden frame with polyethylene panel* u Take the packaging material to an official collecting point.
w The fan is active. In some appliances, the fan is only acti- vated when the compressor is running. 5.4.2 To switch off the fan u Briefly press the fan button Fig.
6 Maintenance 6.1 Defrosting 6.1.1 Defrosting refrigerator compartment The refrigerator compartment is defrosted automatically. The water evaporates. Drops of water on the rear wall are function- ally conditioned and perfectly normal. u Clean the drain hole at regular intervals to allow the defrost water to drain (see 6.
The compressor runs for a long time. → The compressor switches to a low speed when little cold is needed. Although the running time is increased as a result, energy is saved. u This is normal in energy-saving models. → SuperCool is activated. u The compressor runs for longer in order to rapidly cool the food.
Liebherr Hausgeräte Ochsenhausen GmbH * Memminger Strasse 77-79 * 88416 Ochsenhausen * Deutschland * www.liebherr.com.
An important point after buying a device Liebherr SKESF 4240 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr SKESF 4240 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr SKESF 4240 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr SKESF 4240 you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr SKESF 4240 will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr SKESF 4240, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr SKESF 4240.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr SKESF 4240. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr SKESF 4240 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
