Instruction/ maintenance manual of the product KBES4260 Liebherr
Go to page of 14
Operating and installation instructions Upright refrigerator with BioFresh compartment 240713 7085616 - 00 SKBes/SKB/KB/KBes 31/36/42 ... 6.
Contents 1 Appliance at a glance............................................ 2 1.1 Description of appliance and equipment.................. 2 1.2 Range of appliance use............................................ 2 1.3 Conformity......................
ucts suffering harm or perishing. Furthermore, the appliance is not suitable for operation in potentially explosive atmospheres. The appliance is set to operate within specific ambient temperature limits according to its climate rating. The correct climate rating for your appliance is indicated on the type plate.
Accumulated dust increases the energy consumption: - Once a year, dust the refrigerating unit together with the metal grille of the heat exchanger at the back of the appliance.
NOTICE identifies a dangerous situation which, if not obviated, may result in damage to property. Note identifies useful information and tips. 3 Controls and displays 3.
NOTICE* The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompa- nying care product. Otherwise the surface coating will be affected. u Wipe the coated door surfaces using a soft, clean cloth only.
Fig. 5 u Lift out the bearing pin Fig. 5 (22) together with washer Fig. 5 (23) and adjustable-height foot Fig. 5 (24) . u Lift off the stopper Fig. 5 (21) . u Unscrew Fig. 5 (26) the turn hinge Fig. 5 (25) . u Unscrew Fig. 5 (29) the bearing element Fig.
WARNING Risk of injury due to the door dropping out! If the bearing parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly.
u To activate the setting mode: press SuperCool button Fig. 3 (2) for about 5s. w The display indicates c . w The menu symbol Fig. 3 (5) shines. u Using the Up setting button Fig. 3 (7) and Down setting button Fig. 3 (6) , select h . u To confirm: briefly press the SuperCool button Fig.
Cooling with SuperCool u Briefly press SuperCool button Fig. 3 (2) . w The SuperCool symbol Fig. 3 (11) lights up in the display. w The cooling temperature drops to the coldest value. Super- Cool is activated. w SuperCool is automatically deactivated after 6 to12 hours The appliance continues to operate in the energy-saving, normal mode.
5.5 BioFresh compartment The BioFresh compartment allows some types of fresh food to be stored up to three times longer than in conventional refriger- ators, without compromising quality. For food with an indicated best before date, the date specified on the packaging always applies.
u To activate the setting mode: press the SuperCool button Fig. 3 (2) for about 5 s. w The menu symbol Fig. 3 (5) shines. The temperature display indicates c . u Press the Up setting button Fig. 3 (7) the number of times required for b to flash in the display.
u Clean drain hole : Remove deposits with a narrow instrument, e.g. a cotton bud. * u Most of the parts can be dismantled for cleaning: see the relevant chapter. u Clean items of equipment by hand with lukewarm water and a little washing-up liquid. u Only use a damp cloth to clean the telescopic rails .
u Change the position of the appliance or the source of heat. The interior light is not on. → The appliance is not switched on. u Switch on the appliance. → The door was open longer than 15 min. u The interior light automatically switches off if the door has been open for about 15 min.
An important point after buying a device Liebherr KBES4260 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr KBES4260 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr KBES4260 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr KBES4260 you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr KBES4260 will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr KBES4260, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr KBES4260.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr KBES4260. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr KBES4260 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
