Instruction/ maintenance manual of the product ICBP 3166 PremiumPlus Liebherr
Go to page of 18
Operating and installation instructions Combined fridge-freezer with BioFresh compartment for integrated use, door-on-door 010410 7084282 - 03 ICB/ICBP/ICBN/SICBN .
Contents 1 Appliance at a glance ............................................ 2 1.1 Description of appliance and equipment .................. 2 1.2 Range of appliance use ............................................ 2 1.3 Conformity ..................
Furthermore, the appliance is unsuited for use in areas exposed to an explosion hazard. The appliance is set to operate within specific ambient temper- ature limits according to its climate rating. The correct climate rating for your appliance is indicated on the type plate.
(2) SuperFrost button (8) Child lock symbol (3) On/Off button freezer compartment (9) Down setting button refrig- erator compartment (4) Down setting button freezer compartment (10) Up setting button .
WARNING Risk of injury due to the door dropping out! If the fastening parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly.
Fig. 7 4.3.1 Installing the appliance Fig. 8 u Detach the connecting cable from the rear of the appli- ance. Remove the cable holder otherwise there will be vibratory noise. u Lay the connecting cable with the help of string in such a way that the appliance can be easily connected following installa- tion.
u Fit the equaliser trim Fig. 10 (20) concentrically onto the appliance: Slide it into the recess and engage it in the keyholes. Fig. 10 u Screw all the mounting brackets Fig. 11 (34) to the pre-drilled holes in the appliance door using hexagon screws Fig.
u Check 8 mm-presetting. (Distance between appliance door and lower edge of crosspiece) u Slide up the assembly aids Fig. 20 (30) to the height of the unit door. Lower stop edge ▲of the assembly aid = upper edge of the unit door to be fitted. u Unscrew the cross- piece Fig.
Check the following points to ensure the appliance is fitted prop- erly. Failure to do so may lead to icing, condensate forming and malfunction: w The door has to close properly w The unit door must not butt against the unit body w The seal must have a firm fit at the upper corner on the handle side.
Put the appliance into operation about 2 hours before first loading food to be frozen. Do not load food to be frozen before the temperature display reads -18 °C. 4.8.1 Switching on the freezer compartment u Press On/Off button, freezer compartment Fig.
u Use recyclable plastic, metal, aluminium and glass containers and cling film for wrapping. u Use the front area of the refrigerator compartment floor only for briefly putting down cooled products, e.
5.6.2 DrySafe The DrySafe is suitable for storing dry or wrapped food (e.g. dairy products, meat, fish, sausages). A relatively dry storage climate is established here.
5.6.6 Setting the humidity in the HydroSafe u Low humidity: move the regulator to the left. u High humidity: move the regulator to the right. 5.6.7 Drawers Fig. 28 u Remove drawers as illustrated. u To remove drawer cover: once the drawers have been removed, carefully pull the drawer cover with humidity control forwards and lower it for removal.
u To store frozen food directly on the shelves: pull the drawer forwards and lift it out. 5.7.6 Shelves u To remove the shelf: lift up at the front and pull out.
Switching off the IceMaker* If no ice cubes are needed, the IceMaker can be switched off independently of the freezer compartment. When the IceMaker is switched off, the IceMaker drawer can also be used for freezing and storing food. u Press the On/Off button for about 1 second until the LED goes out.
6.4 Cleaning the IceMaker* Fig. 32 The IceMaker has to be switched on. u Pull out the drawer and remove the ice cubes. u Clean the drawer with warm water and mild washing-up liquid. u When the drawer is pulled out, hold down the On/Off button (about 10 seconds).
u alarm button Fig. 2 (1) Press w The warmest temperature reached during the power failure will appear in the temperature display for about 60 s. After that, the actual temperature in the freezer will re-appear. u To prematurely cancel the display of the warmest tempera- ture: press alarm button Fig.
Disposing of the appliance 18.
An important point after buying a device Liebherr ICBP 3166 PremiumPlus (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr ICBP 3166 PremiumPlus yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr ICBP 3166 PremiumPlus - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr ICBP 3166 PremiumPlus you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr ICBP 3166 PremiumPlus will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr ICBP 3166 PremiumPlus, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr ICBP 3166 PremiumPlus.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr ICBP 3166 PremiumPlus. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr ICBP 3166 PremiumPlus along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
