Instruction/ maintenance manual of the product CUNesf 3523 Comfort Liebherr
Go to page of 12
Operating instructions Combined fridge-freezer 290910 7084364 - 03 CUN(esf) ... 3.
Contents 1 Appliance at a glance ............................................ 2 1.1 Description of appliance and equipment .................. 2 1.2 Range of appliance use ............................................ 2 1.3 Conformity ..................
Climate rating for ambient temperatures of ST 16 °C to 38 °C T 16 °C to 43 °C 1.3 Conformity The refrigerant circuit has been tested for leaks. The appliance complies with current safety regulations and EC directives 2006/95/EC and 2004/108/EC. 1.
CAUTION identifies a dangerous situation which, if not obviated, may result in minor or medium bodily injury. NOTICE identifies a dangerous situation which, if not obviated, may result in damage to property. Note identifies useful information and tips.
4.1.4 Transferring the lower bearing elements Fig. 6 u Draw the safety lock Fig. 6 (21) . u Remove the cover Fig. 6 (27) .* u Fully retract the adjustable-height foot Fig. 6 (22) . u If necessary, tip the appliance back a little with the assis- tance of a second person for removal of the bearing pin.
4.2 Insertion into a row of kitchen units Fig. 9 (1) Stack cabinet (3) Kitchen cabinet (2) Appliance (4) Wall The appliance can be inserted into a row of kitchen units. To match the appliance Fig. 9 (2) to the height of the row of units, a suitable stack cabinet Fig.
u Remove the protective film from the decorative trims and drawer fronts.* u Remove all transit supports. u Dispose of packaging material (see 4.5) . NOTICE Risk of damage due to condensate! u Do not install the appliance directly alongside a further refrigerator/freezer.
u Do not store food too close together to enable good air circulation. u To safeguard bottles from tipping over: move the bottle holder. 5.3.2 Setting the temperature The temperature depends on the fo.
w The appliance continues to operate in the energy-saving, normal mode. 5.4.4 Drawers Note The energy consumption increases and the cooling perform- ance decreases if there is insufficient ventilation.
NOTICE* The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompa- nying care product. Otherwise the surface coating will be affected. u Wipe the coated door surfaces using a soft, clean cloth only.
A quiet clicking noise. → The noise is produced whenever the refrigeration unit (motor) automatically switches on or off. u The sound is normal. A hum.
Disposing of the appliance 12.
An important point after buying a device Liebherr CUNesf 3523 Comfort (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr CUNesf 3523 Comfort yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr CUNesf 3523 Comfort - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr CUNesf 3523 Comfort you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr CUNesf 3523 Comfort will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr CUNesf 3523 Comfort, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr CUNesf 3523 Comfort.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr CUNesf 3523 Comfort. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr CUNesf 3523 Comfort along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
