Instruction/ maintenance manual of the product CU 2811-20 Liebherr
Go to page of 14
Operating instructions Combined fridge-freezer 101014 7082858 - 00 CU(sl)(ef) 2311/2811/3311 ... 1.
Contents 1 Appliance at a glance............................................ 2 1.1 Description of appliance and equipment.................. 2 1.2 Range of appliance use............................................ 2 1.3 Conformity......................
- Use on movable bases such as ships, rail transport or planes - Storage of live animals Improper use of the appliance can lead to damage to or spoilage of the stored goods. Climate rating definitions The appliance is set to operate within specific ambient temperature limits according to its climate rating.
- Only assemble, connect and dispose of the appliance according to the instructions. - Please keep these instructions in a safe place and pass them on to any subsequent owners. - Special-purpose lamps (incandescent lamps, LEDs, fluorescent tubes) in the appliance serve to illuminate the appliance interior and are not suited for room illumination.
WARNING Risk of fire due to short circuit! If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit. u Stand the appliance so that it is not touched by connectors or main cables.
4.3.1 Detaching the upper door Note u Remove any food from the door racks before removing the door, so that no food falls out. Fig. 4 u Pull off the cover Fig. 4 (1) forwards and upwards. u Lift off the cover Fig. 4 (2) . CAUTION Risk of injury if the door tips! u Take good hold of the door.
u Insert the upper turn hinge Fig. 4 (3) in the door on the new hinge side. u Screw in the upper bearing block tightly (with 4 Nm) (2 x Torx® 25) Fig. 4 (4) . Use a cordless screwdriver if necessary. u Fit the cover Fig. 4 (1) on the opposite side by sliding it rear- wards and latching it into place.
above the vegetable drawers and at the rear wall. It is warmest at the top front of the compartment and in the door. 5.1.1 Food refrigeration u Store perishable food such as ready-to-serve dishes, meat products and sausages in the coldest zone. Place butter and preserves in the upper area and in the door (see Appli- ance at a glance).
Dismantling door racks Fig. 12 u The door racks can be dismantled for cleaning. 5.2 Freezer compartment You can store frozen food, make ice cubes and freeze fresh food in the freezer compartment.
CAUTION Risk of injury and damage as a result of hot steam! u Do not use electric heaters or steam cleaners, naked flames or defrosting sprays for defrosting. u Do not remove ice using sharp instruments. u Switch off the appliance. u Pull out the power plug or switch off the fuse.
u Switch off the appliance. u Take hold of the lamp cover. u As shown in the diagram, press open the lamp cover on the inside at the front, and pull it off to the side.
u Change the lighting (see Maintenance). With an ambient temperature below 18 °C the device is slightly warmed in places on the inner surface of the fridge compartment's right side wall. → This is a necessary part of the function. u This is normal.
Disposing of the appliance * Depending on model and options 13.
Liebherr Hausgeräte MaricaEOOD * * 4202 Radinovo, Bezirk Plovdiv * Bulgarien * www.liebherr.com.
An important point after buying a device Liebherr CU 2811-20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr CU 2811-20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr CU 2811-20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr CU 2811-20 you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr CU 2811-20 will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr CU 2811-20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr CU 2811-20.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr CU 2811-20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr CU 2811-20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
