Instruction/ maintenance manual of the product CTNESF 3663 Liebherr
Go to page of 14
Operating instructions Combined fridge-freezer 080414 7082833 - 01 CTN(esf) 32../36.. ... 3.
Contents 1 Appliance at a glance............................................ 2 1.1 Description of appliance and equipment.................. 2 1.2 Range of appliance use............................................ 2 1.3 Conformity......................
ucts suffering harm or perishing. Furthermore, the appliance is not suitable for operation in potentially explosive atmospheres. The appliance is set to operate within specific ambient temperature limits according to its climate rating. The correct climate rating for your appliance is indicated on the type plate.
serve to illuminate the appliance interior and are not suited for room illumination. Fire hazard: - The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite. • Do not damage the refrigerant circuit pipes. • Do not allow naked flames or ignition sources to enter the appliance.
4.2 Installing the appliance WARNING Fire hazard due to dampness! If live parts or the mains lead become damp this may cause short circuits. u The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.
4.3.1 Detaching the upper door Note u Remove any food from the door racks before removing the door, so that no food falls out. Fig. 4 u Close the upper door. u Pull off the cover Fig. 4 (1) forwards and upwards. u Lift off the cover Fig. 4 (2) . CAUTION Risk of injury if the door tips! u Take good hold of the door.
Fig. 8 u Lift the stopper Fig. 8 (30) out of the door bearing bush and transfer it. u Detach door handle Fig. 8 (32) , stopper Fig. 8 (33) and pres- sure plates Fig. 8 (34) and transfer to the opposite side. u When fitting the pressure plates on the opposite side, make sure they snap properly into place* 4.
4.6 Connecting the appliance NOTICE Risk of damage to the electronic control system! u Do not use stand-alone inverters (conversion of d.c. to a.c./ three-phase) or energy saving plugs. WARNING Fire and overheating hazard! u Do not use extension cables or multiple socket outlets.
5.3.2 Setting the temperature The temperature depends on the following factors: - the door opening frequency - the room temperature at the site where the appliance is installed - the type, temperature and quantity of frozen food Temperature setting to be recommended: 5 °C The temperature can be changed continuously.
* u The door racks can be dismantled for cleaning. 5.3.7 Removing the bottle holder* u Remove the bottle holder according to the illustration. u Always take hold of the bottle holder on the plastic part. 5.4 Freezer compartment You can store frozen food, make ice cubes and freeze fresh food in the freezer compartment.
u To obtain maximum freezing efficiency place fresh produce on the shelves and already frozen produce on the compart- ment base. w SuperFrost is automatically deactivated after about 65 h. w The SuperFrost button extinguishes once freezing is completed.
6.4 Customer service First check whether you can correct the fault yourself by refer- ence to the list (see Malfunction). If this is not the case, please contact the customer service whose address is given in the enclosed customer service list.
WARNING Risk of injury from LED light! The light intensity of the LED lighting corresponds to laser class 1/1M. If the cover is removed: u Do not look directly into the light at close quarters through optical lenses. Doing so may damage your eyes. u Change the lighting (see Maintenance).
Liebherr Hausgeräte Marica EOOD * 4202 Radinovo * Bezirk Plovdiv, Bulgarien * * www.liebherr.com.
An important point after buying a device Liebherr CTNESF 3663 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr CTNESF 3663 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr CTNESF 3663 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr CTNESF 3663 you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr CTNESF 3663 will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr CTNESF 3663, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr CTNESF 3663.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr CTNESF 3663. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr CTNESF 3663 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
