Instruction/ maintenance manual of the product CBNPes 3956-20 Premium Liebherr
Go to page of 16
Operating and installation instructions Combined fridge-freezer with BioFresh compartment 151110 7084408 - 03 CBNPes/CBN/CBNes ... 6.
Contents 1 Appliance at a glance ............................................ 2 1.1 Description of appliance and equipment .................. 2 1.2 Range of appliance use ............................................ 2 1.3 Conformity ..................
ance is not suitable for storing and cooling medicines, blood plasma, laboratory preparations or similar substances and products covered by the 2007/47/EC Medical Devices Direc- tive. Misuse of the appliance can result in the stored products suffering harm or perishing.
Gases possibly escaping may ignite due to electrical components. - Do not place any burning candles, lamps or other items with naked flames on or in the appliance. - Only store high-percentage alcohol in tightly sealed, upright containers. Alcohol possibly escaping may ignite due to electrical components.
- F0 to F9 - The power failure symbol shines. 4 Putting into operation 4.1 Changing over the door hinges You can change over the door hinges if necessary. Ensure that the following tools are to hand: q Torx 25 q Torx 15 q Screwdriver q Cordless screwdriver, if necessary q Second person for fitting work, if needed 4.
4.1.5 Transferring the lower bearing elements Fig. 7 u Draw the safety lock Fig. 7 (31) forwards for removal. u Remove the cover Fig. 7 (37) .* u Fully retract the adjustable-height foot Fig. 7 (32) . u If necessary, tip the appliance back a little with the assis- tance of a second person for removal of the bearing pin.
Fig. 11 NOTICE Cables may be twisted and damaged as a result! u Use the template. u Detach the supplied template Fig. 11 (52) from the turn hinge and use it to prevent the turn hinge Fig. 11 (12) and bush from turning. u Using a screwdriver, push out the turn hinge Fig.
4.4 Installing the appliance In the event that the appliance is damaged, contact the supplier immediately before connecting to the mains. The floor at the site must be flat and level. Do not install the appliance in a location where it is exposed to direct radiation of the sun, next to a cooker, heater and similar.
4.7 Switching on the appliance Note u To switch on the entire appliance it is necessary only to switch on the freezer compartment. Put the appliance into operation about 2 hours before first loading food to be frozen. Do not load food to be frozen before the temperature display reads -18 °C.
above the plate separating off the BioFresh zone and at the rear wall. It is warmest at the top front of the compartment and in the door. 5.5.1 Food refrigeration Note The energy consumption increases and the cooling perform- ance decreases if the ventilation is inadequate.
The boxes can be removed and placed on the table as a single unit. Only one box or both boxes can be used. If particularly tall bottles are to be stored, attach only the wide box above the bottle rack. Three small boxes are available through the customer service as optional equipment instead of one wide and one small box.
Standard values for storage time at high humidity Cranberries up to 60 days Rhubarb up to 13 days Gooseberries up to 13 days Grapes up to 29 days 5.6.4 Adjusting the temperature in the BioFresh compartment The temperature is automatically regulated to between 0 °C and 3 °C .
w When the button is pressed the first time, the previous value is indicated in the temperature display of the freezer compartment. u To change the temperature in 1 °C steps: briefly press the button. -or- u To change the temperature continuously: hold down the button.
The moisture condenses on the evaporator, is periodically defrosted and evaporates. u The appliance does not have to be manually defrosted. 6.2 Cleaning the appliance Before cleaning: CAUTION Risk of injury and damage as a result of hot steam! Hot steam may damage the surfaces and cause burns.
u Read the appliance designation Fig. 19 (1) , service No. Fig. 19 (2) and serial No. Fig. 19 (3) off the type plate located inside the appliance on the left- hand side. Fig. 19 u Notify the customer service, specifying the fault, appliance designation Fig.
8 Decommissioning 8.1 Switching off the appliance Note u To switch off the entire appliance it is necessary only to switch off the freezer compartment. 8.1.1 Switching off the freezer compartment u Press On/Off button, freezer compartment Fig. 3 (6) for about 2 s.
An important point after buying a device Liebherr CBNPes 3956-20 Premium (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr CBNPes 3956-20 Premium yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr CBNPes 3956-20 Premium - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr CBNPes 3956-20 Premium you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr CBNPes 3956-20 Premium will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr CBNPes 3956-20 Premium, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr CBNPes 3956-20 Premium.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr CBNPes 3956-20 Premium. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr CBNPes 3956-20 Premium along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
