Instruction/ maintenance manual of the product 131113 7085462 - 01 Liebherr
Go to page of 16
Operating instructions Combined fridge-freezer with BioFresh compartment for integrated use, door-on- door 131113 7085462 - 01 ICBP/ (S)ICBN ... LP.
Contents 1 Appliance at a glance............................................ 2 1.1 Description of appliance and equipment.................. 2 1.2 Range of appliance use............................................ 2 1.3 Conformity......................
- in staff kitchenettes, bed and breakfast estab- lishments, - by guests in country homes, hotels, motels and other forms of accommodation, - in catering and similar services in the whole- sale trade Use the appliance solely as is customary within a domestic environment.
• Do not allow naked flames or ignition sources to enter the appliance. • Do not use any electrical appliances in the interior (e.g. steam cleaners, heaters, ice cream maker etc.). • If refrigerant escapes: remove any naked flames or sources of ignition from the leakage area.
- the freezer temperature is above 0 °C. The following displays indicate malfunction. Possible causes and corrective action (see Malfunction). - F0 to F9 - FE * - The power failure symbol shines.
5.4.1 Food refrigeration Note The energy consumption increases and the cooling perform- ance decreases if the ventilation is inadequate. u Always keep the air slits of the fan free. u Place butter and preserves in the upper area and in the door (see Appliance at a glance).
5.4.7 Using adjustable bottle shelf At the base of the refrigerator compartment, the integrated bottle shelf or alternatively the glass shelf can be used: u To use the bottle shelf: store the glass shelf compactly under the bottle shelf. u Place the bottles with the base pointing backwards facing the rear wall.
5.5 BioFresh compartment The BioFresh compartment allows some types of fresh food to be stored up to three times longer than in conventional refriger- ators, without compromising quality. For food with an indicated best before date, the date specified on the packaging always applies.
You can adjust the temperature slightly colder or warmer. The temperature can be adjusted from b1 (coldest temperature) to b9 (warmest temperature). The presetting is b5 . With the b1 to b4 values, the temperature can drop below 0 ° C and therefore food can freeze slightly as a result.
You have to activate SuperFrost in good time, depending on how much fresh food is to be frozen: about 6 hours before placing the food inside in case of small amounts and about 24 hours in advance in case of the maximum amount of food to be frozen. Wrap produce and spread it out as far as possible.
With the top drawer removed: u to remove cold storage accumulators: take hold of the cold storage accumu- lator at the side and press it down for removal. 5.6.10 IceMaker* The IceMaker is in the top drawer of the freezer compartment. The drawer is marked “IceMaker”.
u Pull out the power plug or switch off the fuse. u Place cold storage accumulators on top of the frozen food. u If possible, put the frozen goods in the freezer drawer, wrapped in newspaper or a blanket, and store in a cool place. u Place a pan with hot, not boiling water on a middle shelf.
w The food will stay cool longer. u Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse. 7 Malfunction Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error.
u Set the temperature to a colder setting and check after 24 hours. → The appliance is too close to a source of heat (stove, heater etc). u Change the position of the appliance or the source of heat. → The appliance was not inserted properly into the recess.
Disposing of the appliance * Depending on model and options 15.
Liebherr Hausgeräte Ochsenhausen GmbH * Memminger Strasse 77-79 * 88416 Ochsenhausen * Deutschland * www.liebherr.com.
An important point after buying a device Liebherr 131113 7085462 - 01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Liebherr 131113 7085462 - 01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Liebherr 131113 7085462 - 01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Liebherr 131113 7085462 - 01 you will learn all the available features of the product, as well as information on its operation. The information that you get Liebherr 131113 7085462 - 01 will certainly help you make a decision on the purchase.
If you already are a holder of Liebherr 131113 7085462 - 01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Liebherr 131113 7085462 - 01.
However, one of the most important roles played by the user manual is to help in solving problems with Liebherr 131113 7085462 - 01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Liebherr 131113 7085462 - 01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
