Instruction/ maintenance manual of the product WD-12270BD LG
Go to page of 28
P/No.: 3828ER3026V For U.K. Customer CUSTOMER SERVICES Tel. : 0870 - 873 - LGLG(5454) Fax. : 0870 - 872 - 7337 LGEUK SERVICE WEB-SITE : http://uk.lge.com.
Washing Machine OWNER ’ S MANUAL WD(M)-12270BD WD(M)-12275BD WD-12271BD WD-12276BD Thank you for buying a LG Fully Automatic Washing machine. Please read your owner's manual carefully, it provides instructions on safe installation, use and maintenance.
r oduct Featur e P ontents C 2 Warnings ...............................................................................................3 Specification ..........................................................................................4 Installation .
ar nings W 3 For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. ! READ ALL INSTRUCTIONS BEFORE USE W ARNING! • Do not install or store the washer where it will be exposed to the weather.
pecification S 4 Name : Front loading washing machine Power supply : 220 - 240V~, 50Hz Size : 686mm(W) × 767mm(D) × 982mm(H) Weight : 86kg Wash capacity : Refer to the Rating Label Max. Watt : 2200W Spin speed : No spin/400/800/1000/1200 Water consumption : 89 ℓ Permissible water pressure : 0.
nstallation I 5 1 . To prevent internal damage during transport, the special 4 bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. • If they are not removed, it may cause heavy vibration, noise and malfunction.
nstallation I 6 Level floor : Allowable slope under entire washer is 1˚ Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance. Additional Clearance : For wall, door and floor modeling is required.
7 nstallation I ▶ Water supply pressure must be between 30kPa and 1000kPa (0.3~10kgf/cm 2 ) ▶ Don’t strip or crossthread when connecting Inlet hose to the valve. ▶ If the water supply pressure is more than 1000kPa, a decompression device should be installed.
8 nstallation I Nor mal T ap without thread & screw type inlet hose Nor mal T ap without thread & one touch type inlet hose 1 . Unscrew the fixing screw to attach the tap. 2 . Push the connector up till the rubber packing is in tight contact with the tap.
9 nstallation I Installation of drain hose about about about about about about • The drain hose should not be placed higher than 100 cm above the floor. • Proper securing of the drain hose will protect the floor from damage due to water leakage.
10 nstallation I Level adjustment Concrete floors Wooden floors (Suspended floors) 1. Adjusting the washing machine level properly prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.
11 ar e befor e washing C 1. Care Labels Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed. 2. Sorting To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
12 dding detergent A • Main wash only U • Pre Wash + Main Wash U • Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could stain clothes. • Do not leave the fabric softener in the detergent drawer for more than 2 days.
13 unction F Recommended courses according to the laundry type Proper Time Program Fabric Type Temp. in (Option) Minutes Cotton Cotton-Eco Synthetic Delicate Wool/Silk Hand Wash Quick 30 Duvet Laundry type is the same in Cotton. Color fast garments (shirts, night dresses, pajamas.
14 ow to use washer H • Press the Power( ) button to start. • Press the Start/Pause( ) button. • Initial condition - Wash : Main wash - Rinse : 3 times - Spin : 800 rpm - Water temperature : 60˚C - Program : Cotton • Press the Power( ) button to start.
15 ow to use washer H Program • 9 programs are available according to the laundry type. 1. Power 2. Initial Program Power • Press the Power( ) button to turn power on and off. • To cancel the Time Delay function, the Power( ) button should be pressed.
16 ow to use washer H Start/Pause Option • This Start/Pause button is used to start wash cycle or pause the wash cycle. • If temporary stop of wash cycle is needed, press “ Start/Pause ” button. • When in Pause, the power is turned off automatically after 4 minutes.
17 ow to use washer H Child lock • If you choose to lock the buttons on the control assembly to prevent tampering, this function may be selected. • Child lock can be set by pressing and holding the Option and Rinse button simultaneously. • When child lock is set, all buttons are inoperable.
18 ow to use washer H 1. Spin selection 2. No spin Spin • Spin speed is available according to the program as follows. - Cotton & Cotton-Eco & Quick 30 No Spin - 400 - 800 - 1000 - 1200 - Sy.
19 ow to use washer H W ater T emperatur e Beeper • By pressing the Temp. button, the water temperature can be selected. - Cold - 30˚C / 40˚C / 60˚C / 95˚C • Water temperature can be selected as below according to the program.
20 ow to use washer H • If the washer encounters a fault during operation, the associated fault will be displayed. “ ” : Water pressure sensing error “ ” : Problem of overfilling water “ .
21 aintenance M 2 3 2 3 The water inlet filter - " " error message will blink on the control panel when water does not enter the detergent drawer. - If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
22 aintenance M Dispenser drawer ❋ After a while detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downward and by pulling it out.
23 aintenance M The water circulation nozzle • Clean the water circulation nozzle, if clogged. Cleaning your washer 1. Exterior Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent.
24 r oubleshooting guide ❋ This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately. When the machine does not function properly or does not function at all, check the following points before you contact your service provider.
25 r oubleshooting guide Washer does not start Washer won’t spin Door does not open Wash cycle time delayed • Electrical power cord may not be plugged in or connection may be loose. • House fuse blown, circuit breaker tripped,or a power outage has occurred.
26 r oubleshooting guide T Symptom Possible Cause Solution • Water supply is not adequate in area • Water supply taps are not completely open. • Water inlet hose(s) are kinked. • The filter of the inlet hose(s) are clogged. • Drain hose is kinked or clogged.
erms of W arranty T 27 What Is Not Covered: • Service trips to your home to teach you how to use the product. • If the product is connected to any voltage other than that shown on the rating plate. • If the fault is caused by accident, neglect, misuse or Act of God.
An important point after buying a device LG WD-12270BD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG WD-12270BD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG WD-12270BD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG WD-12270BD you will learn all the available features of the product, as well as information on its operation. The information that you get LG WD-12270BD will certainly help you make a decision on the purchase.
If you already are a holder of LG WD-12270BD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG WD-12270BD.
However, one of the most important roles played by the user manual is to help in solving problems with LG WD-12270BD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG WD-12270BD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
