Instruction/ maintenance manual of the product 6550 (25-1/2") ABC Office
Go to page of 9
1 “When You Need More Than Staples.” Toll Free: 800 - 658 - 8788 Fax: 801 - 927 - 3037 info@abcoffice.com IDEAL CUTTERS Model 4850 (18 - 3/4”) Model 4850 - 90 (18 - 3/4”) Model 5250 (20 - 1/2.
2 Safety Rules • Ensure that at no time more than one person is working at the machine. • Leave the key for the safety lock with the person responsible for the cutting machine. • Power operated cutting machines must be operated only by trained and reliable personnel.
3 The entire machine is dispatched in one package, but the stand has been dismounted from the machine. The tool box contains: - a set of tools for service and maintenance, - the mounting hardware for the stand, - the back ga uge crank (#3) with a mounting screw, - two keys for safety lock.
4 The key can be removed to prevent unauthorized use. To activate the machine, turn the key 45º to the right. • Re - set button (#14) Before the knife can be activated on models IDEAL 4850, IDEAL 5250 and IDEAL 6550, the re - set butt on has to be pressed to re - establish the “ready to cut” status of the machine.
5 Under the viewing window (#16) the measuring scale rotates in accordance with the back gauge movement. The exact measurement is to be r ead beneath the indicator.
6 Maintenance Knife change Precise cuts are only possible with a sharp knife. The knife should be changed as soon as the quality and the accuracy of a cut are not in accordance with the standards expected from this cutting ma chine. Should the knife jam in the paper pile or leave grooves in the paper, it must be changed immediately.
7 IDEAL 6550 - 90: Remove knife screws (B and C). Loosen knife holders and lower the knife downwards from the knife carrier (#19). Then, due to the length of the knife, a sideways movement between the knife guide plate s is required for removal. h. Take out cutting stick (#2), turn, rotate or exchange it and place it back into machine.
8 IMPORTANT – If the knife has been lowered by means of the cut ting depth adjustment screw (#6) to compensate for a worn cutting stick , then this adjustment screw (#6) has to be turned back to its highest setting before the cutting stick (#5) is turned, rotated or exchanged.
9 Should the machine cut out during operation, check the overload switches (#11 and #12). If one of the buttons of the overload switches has popped out, it can be re - set a fter a short period. Should the overload switch pop out again and cannot be re - set even after a few minutes, please contact your service technician.
An important point after buying a device ABC Office 6550 (25-1/2") (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ABC Office 6550 (25-1/2") yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ABC Office 6550 (25-1/2") - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ABC Office 6550 (25-1/2") you will learn all the available features of the product, as well as information on its operation. The information that you get ABC Office 6550 (25-1/2") will certainly help you make a decision on the purchase.
If you already are a holder of ABC Office 6550 (25-1/2"), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ABC Office 6550 (25-1/2").
However, one of the most important roles played by the user manual is to help in solving problems with ABC Office 6550 (25-1/2"). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ABC Office 6550 (25-1/2") along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
