Instruction/ maintenance manual of the product F14A8TDA5 LG
Go to page of 40
O WNER’S MANU AL W A SHING MA CHINE F14A8TDA(1~9) F12A8TDA(1~9) P /No. : MFL67473493 www .lg.com Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely.
2 Contents ....................................2 Product Features ......................3 Important safety instructions Important safety instructions .................4 Basic safety precautions .......................5 Save these instructions ........
3 추가선택 예약 Inverter Direct Drive system The advanced Brushless DC motor directly drives the drum without belt and pulley. Low noise speed control system By sensing the amount of load and balance, it evenly distributes load to minimize the spinning noise level.
4 Important safety instructions For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE.
5 Important safety instructions To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following: W ARNING • Before installation, check exterior damages. If it has, do not install.
6 Important safety instructions ■ Basic safety precautions To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following: W ARNING • Before discarding an old machine unplug it.
7 Specifications ■ Name : Front loading washing machine ■ Power supply : 220 - 240 V~, 50 Hz ■ Size : 600 mm (W) 590 mm (D) 850 mm (H) ■ Weight : 65 kg ■ Max.Watt : 2100 W 0.33 W (The off-mode, The left-on mode) ■ Wash capacity : 8 kg ■ Permissible water pressure : 100 - 1000 kPa (1.
■ Removing packing 1 . Remove the cardboard box and styrofoam packing. 2 . Lift the washing machine and remove the base packing. 3 . Remove the tape securing the power supply cord and drain hose. 4 . Remove the inlet hose from the drum. 1 . Unscrew the 4 bolts with the spanner supplied.
9 Installation W asher approx. 2cm • Level floor : Allowable slope under entire washer is 1˚ • Power outlet : Must be within 1.5 meters of either side of location of washer.
10 BS plug safety details (for U.K. user) Important The wires in this mains lead are coloured in accordance with the following code: Green and yellow: Earth Blue: Neutral Brown: Live This appliance must be earthed.
11 Installation 1 . Unscrew the adapter ring plate and the 4 adapter retaining screws. 2 . Push the adapter onto the end of the tap so that the rubber seal forms a watertight connection.
1 . Unscrew the adapter ring plate and the 4 adapter retaining screws. 2 . Remove the guide plate if the tap is too large to fit the adapter. 3 . Push the adapter onto the end of the tap so that the rubber seal forms a watertight connection. Tighten the adapter ring plate and the 4 screws.
13 Installation Installation of drain hose • The drain hose should not be placed higher than 100 cm above the floor. Water in the washer does not drain or drains slowly. • Securing the drain hose correctly will protect the floor from damage due to water leakage.
• Diagonal Check When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all (Please, check both directions). If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
15 Installation Concrete floors W ooden floors (Suspended floors) • The installation surface must be clean, dry and level. • Install washer on a flat hard floor. Tile floors (Slippery floors) • Position each foot on the Tread Mate and level the machine to suit.
Operating washing machine 2 . Open the door and load laundry. 1 . Sort Laundry. (Refer to 17 page) 3 . Press the Power button. 4 . Select a Program.
17 How to use washer ■ Care befor e washing 3 . Caring before loading Combine large and small items in a load. Load large items first. Large items should not be more than half the total wash load. Do not wash single items. This may cause an out-of-balance load.
W ashing program table • Recommended courses according to the laundry type. 18 How to use washer Wool Cotton Eco Easy Care Mix Provides optimized washing performance with less energy consumption. This cycle is suitable for casual shirts that do not need ironing after washing.
19 How to use washer The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine M1009.
20 Operating data How to use washer NOTE • Information of main washing programmes at half load. F12** 1200 1200 1000 1200 1000 1000 1200 1000 800 1200 800 800 1200 1200 Max RPM Cotton Cotton Eco.
21 How to use washer ■ Control panel Start/Pause button Beep On/Off Power button Option buttons Additional program buttons LED display Program dial Power • Press the Power button to turn power on and off. • To cancel the Time Delay function, the power button should be pressed.
1 . Press the Power button. 2 . Select a cycle. 3 . Touch the Time Delay button and set time required. 4 . Press the Start/Pause button. You can set a time delay so that the washing machine will start automatically and finish after a specified time interval.
23 How to use washer • Spin Speed level can be selected by touching 'Spin' button repeatedly. 1 . Press the Power button. 2 . Touch the Spin button to select RPM. 3 . Press the Start/Pause. Spin only • Time Save : This option can be used to reduce the time of a wash program.
The Beep on/off function can be set only during the washing cycle. 1 . Press the Power button. 2 . Press the Start/Pause button. 3 . Touch and hold the Temp. and Rinse button simultaneously for three seconds to set Beep on/off function. Once the Beep on/off function is set, the setting is memorized even after the power is turned off.
25 How to use washer Tub Clean is a special cycle to clean the inside of the washing machine. A higher water level is used in this cycle at higher spin speed. Perform this cycle regularly. 1 . Remove any clothing or items from the washer and close the door.
• Main wash only ➔ • Pre Wash + Main Wash ➔ • Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could stain clothes. Close the dispenser drawer slowly. • Do not leave the fabric softener in the detergent drawer for more than 2 days.
27 Adding detergent • Detergent should be used according to the instruction of the detergent manufacture. • If too much detergent is used, too many suds can occur and this will decrease the washing result or cause heavy load to the motor. • It is recommended that you use powdered detergent for best results.
The water inlet filter • " " icon will be displayed on the control panel when water does not enter the detergent drawer. • If water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. It is therefore a good idea to clean it from time to time.
29 Maintenance • Allow the water to cool down before cleaning the drain pump, carrying out emergency emptying or opening the door in an emergency. • The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of your machine.
Dispenser drawer • After a while, detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
31 Maintenance • Proper care of your washer can extend its life. • The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent. • Immediately wipe off any spills. Wipe with damp cloth. • Try not to hit surface with sharp objects.
• This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately. When the machine does not function properly or does not function at all, check the following points before you contact your service provider.
33 T roubleshooting guide Washer does not start Washer will not spin Door does not open Wash cycle time delayed Fabric softener overflow Softeners dispensed too early • Electrical power cord may not be plugged in or connection may be loose. • House fuse blown, circuit breaker tripped,or a power outage has occurred.
Symptom Possible Cause Solution • Water supply is not adequate in area. • Water supply taps are not completely open. • Water inlet hose(s) are kinked. • The filter of the inlet hose(s) are clogged. • Drain hose is kinked or clogged. • The drain filter is clogged.
35 T roubleshooting guide NOTE • SMARTDIAGNOSIS™ function is available only for the products with a SMARTDIAGNOSIS™ mark. In case of a mobile phone with static option, the SMARTDIAGNOSIS™ f unction might not operate. • Only use this feature when instructed to do so by the call center.
What Is Not Covered: • Service trips to your home to teach you how to use the product. • If the product is connected to any voltage other than that shown on the rating plate.
Memo.
Memo.
.
CUSTOMER SERVICES Tel. : +44-(0) 844 847 LGLG(5454) Fax. : +44-(0) 844 847 1413 LGEUK SERVICE WEB-SITE : http://www.lg.com For U.K. Customer.
An important point after buying a device LG F14A8TDA5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG F14A8TDA5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG F14A8TDA5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG F14A8TDA5 you will learn all the available features of the product, as well as information on its operation. The information that you get LG F14A8TDA5 will certainly help you make a decision on the purchase.
If you already are a holder of LG F14A8TDA5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG F14A8TDA5.
However, one of the most important roles played by the user manual is to help in solving problems with LG F14A8TDA5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG F14A8TDA5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
