Instruction/ maintenance manual of the product M2362D LG Electronics
Go to page of 95
www .lg. com O WNER’S MANU AL MONIT OR T V MONIT OR TV MODELS Please r ead this manual car efully bef ore operating your s et and r etain it f or f uture r ef erenc e.
1 PREP AR A TION FR ONT P ANEL CONTR OLS ■ This is a simplified r epr esent ation of the front panel. The image shown ma y be somewhat different from your set.
2 PREP AR A TION B A CK P ANEL INFORMA TION ■ This is a simplified r epr esent ation of the back panel. The image shown ma y be some what different from your set.
3 PREP AR A TION S T AND INS T ALLA TION ■ The image sho wn ma y be somewhat differ ent fr om your set. 1 2 3 Car efully place the product screen side down on a cushioned surface that will prot ect pr oduct and scr een from damage. Insert the S S t t a a n n d d B B a a s s e e int o the product.
4 PREP AR A TION S T AND INS T ALLA TION ■ The image sho wn ma y be somewhat differ ent fr om your set. 1 2 3 Car efully place the product screen side down on a cushioned sur- face that will pro t ect product and screen from damage. Insert the S S t t a a n n d d B B a a s s e e int o the product.
5 PREP AR A TION DET A CHING S T AND ■ The image sho wn ma y be somewhat differ ent fr om your set. 1 2 3 4 Place the se t screen side down on a cushion or soft cloth. Det ach the monitor t o the S S t t a a n n d d B B a a s s e e by turning the scr e w t o the left.
6 PREP AR A TION DET A CHING S T AND ■ The image sho wn ma y be somewhat differ ent fr om your set. 1 2 3 Place the set screen side down on a cushion or soft cloth. Det ach the stand base fr om the set b y turning the scr e w t o the left with a coin.
7 PREP AR A TION < < M M 2 2 7 7 6 6 2 2 D D / / M M 2 2 7 7 6 6 2 2 D D P P > > DET A CHING S T AND BOD Y 1. R emo ve the scr ew 4 point. 2. Pull the st and body . 1. R emo ve the scr ew 2 point. 2. Pull the st and body . ■ The image sho wn ma y be somewhat different fr om y our set.
8 PREP AR A TION DESKT OP PEDES T AL INS T ALLA TION F or proper ventilation, allow a clear ance of 1 0 cm on each side and fr om the wall. W ALL MOUNT : HORIZONT AL INST ALLA TION F or proper ventilation, allow a clear ance of 1 0 cm on each side and fr om the wall.
9 SWIVEL ST AND(Onl y M2 7 6 2D/M2 7 6 2DP) PREP AR A TION ■ The image sho wn ma y be somewhat different fr om y our set. Aft er installing the set, you can adjust the set manually to the left or right direction b y 1 7 9 degree s to suit your viewing position.
10 PREP AR A TION L OCA TION P osition your set so that no bright light or sunlight falls directly ont o the screen. Care should be tak en not t o expose the set to an y unnecessary vibr ation, moisture, dust or heat. Also, ensure that the set is placed in a position t o allow a fr ee flo w of air .
11 PREP AR A TION SECURING THE SET T O THE W ALL T O PREVENT F ALLING WHEN THE SET IS USED ON A ST AND (Onl y M2 7 6 2D/M2 7 6 2DP) W e recommend that you set up the set close to a wall so it cannot fall ov er if pushed backwar ds.
12 PREP AR A TION A TT A CHING THE TV T O A DESK (Onl y M2 7 6 2D/M2 7 6 2DP) The TV must be at tached to desk so it cannot be pulled in a forwar d/backwar d direction,pot entially causing injury or damaging the pr oduct.Use only an at t ached scre w .
13 PREP AR A TION KENSINGT ON SECURITY S Y STEM - The pr oduct is equipped with a Kensingt on Securit y Sy st em connector on the back panel. Connect the K ensingt on Securit y Sy st em cable as shown below .
AV 1 AV 2 AC IN 14 A V 1 A V 2 AC IN ANTENNA/ CABLE IN A V 1 A V 2 AC IN ANTENNA/ CABLE IN EXTERNAL EQ UIPMENT SETUP ■ F or optimum pictur e qual it y , adjust antenna direction.
Connect the SET - T OP outputs to the C C O O M M P P O O N N E E N N T T I I N N V V I I D D E E O O sock ets (Y P B P R ) on the set. Connect the audio cable fr om the SET - T OP t o C C O O M M P P O O N N E E N N T T I I N N A A U U D D I I O O socke ts of the set.
16 EXTERNAL EQ UIPMENT SETUP When connecting with a HDMI Connect the HDMI output of the digital set -t op box t o the H H D D M M I I I I N N jack on the set.
17 EXTERNAL EQ UIPMENT SETUP D VD SETUP When connecting with a component cable Component Input ports T o get bet t er pictur e qualit y , connect a D VD play er to the component input ports as shown below .
18 EXTERNAL EQ UIPMENT SETUP When connecting HDMI cable Connect the HDMI output of the D VD to the H H D D M M I I I I N N jack on the set. 1 G HDMI supports video and audio. Y ou do not need t o connect a spera t e audio cable. G If the D VD pla yer does not support Auto HDMI, you need to set the D VD output resolution appropriat ely .
19 EXTERNAL EQ UIPMENT SETUP VCR SETUP ■ T o av oid picture noise (interfer ence), leav e an adequat e distance bet ween the VCR and the set. ■ If a user uses 4:3 picture format for a long time, an afterimage ma y remain on the sides of the screen for a short time.
20 EXTERNAL EQ UIPMENT SETUP When connecting with a R CA cable Connect the audio/video out sock et s of the VCR to A UDIO/VIDEO in socket s of the set. Pr ess the INPUT but t on to select A V . Pr ess the PLA Y but ton on the VCR. The VCR pla yback picture appears on the screen.
21 EXTERNAL EQ UIPMENT SETUP PC SETUP This pr oduct pr o vides Plug and Pla y capabilit y , meaning that the PC adjusts aut omaticall y t o the set's set tings. When connecting with a D-sub 1 5 pin cable 4 Connect the signal cable fr om the monit or output socke t of the PERSONAL COMPUTER to the PC input socke t of the set.
22 EXTERNAL EQ UIPMENT SETUP When connecting with a D VI cable Connect the D VI output of the PC t o the D D V V I I - - D D I I N N jack on the set. Connect the audio cable from the PC t o the A A U U D D I I O O I I N N ( ( R R G G B B / / D D V V I I ) ) socket s of the set.
23 EXTERNAL EQ UIPMENT SETUP T ie cables t ogether with a cable tie as shown in the illustr ation. Cable tie R R B A CK CO VER FOR WIRE ARR ANGEMENT.
24 EXTERNAL EQ UIPMENT SETUP R GB/D VI[PC] HDMI[D TV] suppor t ed mode R esolution 6 4 0x4 8 0 8 00x600 7 2 0x4 00 1 0 2 4x7 6 8 Horizont al Fr equency(kHz) V ertical Fr equency(Hz) 3 1.4 6 8 7 0 3 1.4 6 9 60 37 . 50 0 75 37 . 8 79 6 0 46 . 875 75 4 8.
25 EXTERNAL EQ UIPMENT SETUP INITIAL SETTING This F unction guides the user t o easily set the essential it ems for viewing the TV for the first time when purchas- ing the TV . If will be displa yed on the scr een when turning the TV on for the fir st time.
26 W A TCHING TV / CHANNEL CONTR OL REMO TE CONTR OL KEY FUNCTIONS When using the r emot e contr ol, aim it at the remo t e control sensor on the set. 123 45 6 78 0 - 9 VOL CH ENTER POWER MUTE Q.MENU MENU FLASHBK RETURN FAV PICTURE SOUND SAP RA TIO TV/PC INPUT LIGHTING PO WER TV/PC INPUT T urns your set on or off.
27 TURNING ON THE TV W A TCHING TV / CHANNEL CONTR OL Fir st, connect the power cord corr ectly . T urn on the pow er b y pressing the pow er but t on on the product. Pr ess the TV/PC but t on on the remo t e control. Set the channel by using the CH + / - but tons or number but- t ons on the remot e contr ol.
28 W A TCHING TV / CHANNEL CONTR OL CHANNEL SELECTION Pr ess the C C H H + + or - - or NUMBER but tons t o select a pr ogr amme number . 1 V OLUME ADJUSTMENT Pr ess the V OL + + or - - but t on to adjust the volume. If y ou want t o switch the sound off, press the MUTE but ton.
29 W A TCHING TV / CHANNEL CONTR OL QUICK MENU / F A V ORITE CHANNEL SETUP Displa y each menu. Mak e appr opriat e adjustments. ■ A A s s p p e e c c t t R R a a t t i i o o : Selects your desir ed picture format.
30 W A TCHING TV / CHANNEL CONTR OL ON SCREEN MENUS SELECTION AND ADJUSTMENT Y our set's OSD ( On Screen Displa y ) may differ slightly from what is shown in this manual.
31 W A TCHING TV / CHANNEL CONTR OL Use this t o automa tically find and st or e all a vailable channels. When y ou st art aut o pr ogr amming in digital mode, all pre viously st ored service information will be delet ed. A UT O CHANNEL TUNING • Use the NUMBER but tons t o input a 4-digit passw ord in Lock Sy st em ‘On’ .
32 W A TCHING TV / CHANNEL CONTR OL When selecting DTV or TV or CAD TV or CA TV input signal, you can view the on-scr een signal str ength monit or to see the qualit y of the signal being receiv ed. MANU AL TUNING ■ A passw ord is requir ed to gain access to the Manual T uning menu if the Lock Sy stem is turned on.
33 W A TCHING TV / CHANNEL CONTR OL A cust om list can be creat ed b y toggling each channel on or off with the ENTER but ton. The channels in the Cust om List ar e displa yed in black and the channels delet ed fr om the Cust om List ar e displa yed in gr a y .
34 PICTURE CONTR OL This featur e lets you choose the wa y an analog picture with a 4:3 aspect r atio is display ed on your set. ■ R GB-PC input source use 4:3 or 1 6:9 aspect r atio.
35 PICTURE CONTR OL Set b y pr ogr am Selects the proper picture proportion t o match the sour ce’ s image. 4:3 Choose 4:3 when you want t o view a picture with an original 4:3 aspect r atio. 1 6:9 Adjust the pictur e horizont ally , in a linear pr o- portion t o fill the entir e screen.
36 PICTURE CONTR OL • Pr ess the RETURN but t on to mov e to the pre vious menu screen. PRESET PICTURE SETTINGS Pictur e Mode-Pr ese t Ther e are factory pre sets for picture set tings a vailable in the user menus. Y ou can use a pre set, change each set- ting manually .
37 PICTURE CONTR OL Select PICTURE. 2 Select A A u u t t o o B B r r i i g g h h t t . . 3 Select On or Off . 1 MENU ENTER ENTER When ON is select ed, this function adjusts the screen brightness automa tically , depending on the surrounding envir onment, to pro vide optimal viewing conditions.
38 PICTURE CONTR OL PRESET PICTURE SETTINGS Pictur e Mode-Pr ese t Select PICTURE. 2 Select Pictur e Mode. 3 Select desir ed picture value. 1 • Picture Mode adjusts the set for the best pic- tur e appear ance. Select the pre set value in the Pictur e Mode menu based on the channel cat- egory .
39 PICTURE CONTR OL Picture Mode : Vivid • Backlight 1 00 • Contra st 1 00 • Brightness 5 0 • Sharpness 7 0 • Color 7 0 • Tint 0 • Advanced Control PICTURE Move Ent er E D • Advanced Control Choose one of thr ee automa tic color adjustments.
40 PICTURE CONTR OL Choose one of t wo automa tic color adjustments. Aut o Color T one Contr ol (6 5 00K/9 3 00K/sR GB)(R GB,D VI mode only) Select PICTURE. 2 Select Adv anced Control. 3 Select Color T emper atur e. 4 Select either 6 5 00K, 9 3 00K, sR GB.
41 MANU AL PICTURE ADJUS TMENT Pictur e Mode-User option NO TE ! G Y ou cannot adjust color , sharpness and tint in the R GB, D VI mode. Select PICTURE. 2 Select Pictur e Mode. 4 Select Backlight, Contr ast, Brightness, Sharpness, Color or Tint. 5 Mak e appr opriat e adjustments.
42 PICTURE CONTR OL Picture Mode : Vivid • Backlight 1 00 • Contra st 1 00 • Brightness 5 0 • Sharpness 7 0 • Color 7 0 • Tint 0 • Advanced Control PICTURE Move Ent er E D • Advanced Control F r esh Contr ast Optimize s the contr ast automa tically according to the brightness of the reflection.
43 AD V ANCED - BLA CK (D ARKNESS) LEVEL When y ou vie w a film, this function adjusts the set t o the best picture qualit y . This function w orks in the follo wing mode: A TV , A V(NTSC-M), Component, HDMI Select PICTURE. 2 Select Adv anced Contr ol.
44 PICTURE CONTR OL Select PICTURE. 2 Select Adv anced Contr ol. 3 Select Film Mode . 4 Select On or Off . 1 Picture Mode : Vivid • Backlight 1 00 • Contra st 1 00 • Brightness 5 0 • Sharpness.
45 PICTURE CONTR OL PICTURE RESET Set tings of the select ed picture modes re turn to the default fact ory set tings. Select PICTURE. 2 Select Pictur e R ese t .
46 PICTURE CONTR OL T o view a normal pictur e, set the re solution to match what the PC is using. This function w orks in the follo wing r esolution in R GB[PC] mode. Selecting R esolution 1 Select PICTURE. <V ertical resolution : 7 6 8> <V ertical resolution : 1 0 5 0> 2 Select SCREEN(R GB-PC).
47 PICTURE CONTR OL 1 Aut omatically adjusts picture position and minimizes image instabilit y . Aft er adjustment, if the image is still not corr ect, your set is functioning properly but needs further adjustment.
48 PICTURE CONTR OL If the pictur e is not clear aft er aut o adjustment and especially if char act ers are still shaky , adjust the picture phase manually . This function w orks in the following mode: R GB[PC]. Adjustment for scr een P osition, Size, Phase 1 Select PICTURE.
49 PICTURE CONTR OL R eturns P osition, Size and Phase to the default fact ory set tings. This function w orks in the following mode: R GB[PC]. Scr een R eset 1 MENU Select PICTURE. 2 Select SCREEN(R GB-PC). 3 ENTER Select R ese t. 5 ENTER R un R ese t.
50 SOUND CONTR OL A VL automa tically remains on the same volume lev el if you change progr ammes. A UT O V OLUME LEVELER Select A UDIO. 2 Select Aut o V olume. 3 Select On or Off . 1 MENU ENTER ENTER • Pr ess the MENU but t on to close the menu windo w .
51 Y ou can adjust the sound balance of the speaker s t o preferr ed lev els. B ALANCE Select A UDIO. 2 Select Balance. 1 3 Mak e desir ed adjustment. MENU ENTER ENTER Aut o V olume : Off Balance 0 So.
52 SOUND CONTR OL PRESET SOUND SETTINGS - SOUND MODE Sound Mode lets you enjoy the best sound without an y special adjustment as the TV sets the appr opriat e sound options based on the pr ogr am content.
53 SOUND CONTR OL PRESET SOUND SETTINGS - SOUND MODE Y ou can select your preferr ed sound set ting; Standar d, Music, Cinema, Spor t and Game and you can also adjust the fr equencies of the equalizer . St andar d, Music, Cinema, Spor t and Game are pr eset for optimum sound qualit y at the fact ory .
Aut o V olume : Off Balance 0 Sound Mode : St andard • T reble 5 0 • Bass 5 0 • Reset TV Speaker : On A UDIO Move Enter LR • T reble 5 0 54 SOUND CONTR OL • Pr ess the MENU but t on to close the menu window . • Pr ess the RETURN but t on to mov e to the pre vious menu screen.
55 SOUND CONTR OL A UDIO RESET Set tings of the select ed Sound Mode return t o the default fact ory set tings. Select A UDIO. 2 Select Res e t . 3 Initialize the adjust ed value. 1 MENU ENTER ENTER • Pr ess the MENU but t on to close the menu window .
56 SOUND CONTR OL TV SPEAKER S ON/ OFF SETUP Y ou can tun of the speaker s when using ext ernal audio sy stem. Select A UDIO. Select TV Speak er . 3 Select On or Off . 1 2 MENU ENTER ENTER • Pr ess the MENU but t on to close the menu window . • Pr ess the RETURN but t on to mov e to the pre vious menu screen.
57 SOUND CONTR OL S TEREO/S AP BR O ADCAST SETUP F or Analog only: This TV can r eceiv e MTS st ereo progr ams and an y SAP (Secondary Audio Progr am) that accompa- nies the st er eo progr am if the station tr ansmits an additional sound signal. Mono sound is aut omatically used if the br oadcast is only in Mono.
58 TIME SETTING The time is set automa tically from a digital channel signal. The digit al channel signal includes information for the curr ent time pro vided by the broadca sting st ation. Set the clock manually if the current time is set incorrectl y by the aut o clock function.
59 TIME SETTING If the curr ent time set ting is wrong, re set the clock manually . Manual Clock Setup Select TIME. 2 Select Clock. Select A A u u t t o o . 1 3 Select the Y ear , Month, Dat e, Hour , or Minut es option. Set the Y ear , Month, Da t e, Hour , or Minut es option.
60 The Off time function aut omatically switches the set to standb y at a prese t time. T wo hours after the set is switched on by the on time function it will aut omaticall y switch back to standb y mode unless a but t on has been pre ssed. The Off time function o verride s the On timer function if both are set to the same time.
61 TIME SETTING The sleep timer aut omatically switches the set off after the pre set time has elapsed. SLEEP TIMER SETTING • When you switch the set off, the pre set sleep time is cancelled. • Y ou can also adjust Sleep T imer in the Q.Menu. Select TIME.
62 TIME SETTING If the set is switched on and there is no input signal, it will switch off aut omaticall y aft er 1 0 minut es. A UT O SHUT -OFF SETTING Select TIME.
63 OPTION SETTING The menus can be shown on the screen in the selected language. ON-SCREEN MENUS LANGU A GE SELECTION Select O P T I O N . 2 Select Language. 3 Select Menu. 4 Select y our desir ed language. F r om this point on, the on-scr een menus will be shown in the select ed language.
64 OPTION SETTING Selects a label for each input source. INPUT LABEL Select O P T I O N . 2 Select Input Label. 3 Select the sour ce. 4 Select the label. 1 MENU ENTER ENTER • Pr ess the MENU but t on to close the menu window . • Pr ess the RETURN but t on to mov e to the pre vious menu screen.
65 OPTION SETTING The set can be configured so that the remot e control is r equir ed t o control it. This feature can be used t o pr ev ent unauthorized viewing.
66 OPTION SETTING Caption must be pr ovided to help people with hearing loss w atch TV . Select a caption mode for displa ying cap- tioning informa tion if pro vided on a pr ogr am. Analog cap tion displa y s information at an y position on the scr een and is usually the pr ogr am's dialog.
67 OPTION SETTING Choose the language y ou want the D TV/CAD TV Captions t o appear in. Other Languages can be chosen for digital source s only if the y are included on the progr am. This function in only a vailable when Caption Mode is set On. Select O O P P T T I I O O N N .
68 OPTION SETTING Cust omize the DTV/CAD TV captions that appear on your screen. This function in only a vailable when Caption Mode is set On. Select O O P P T T I I O O N N .
69 OPTION SETTING It helps y ou contr ol LED when pow er is turned on. PO WER INDICT OR 1 Select OPTION. 2 Select P o wer Indicat or . Select On or Off . 3 MENU ENTER ENTER 4 ENTER • Pr ess the MENU but t on to close the menu window . • Pr ess the RETURN but t on to mov e to the pre vious menu screen.
70 OPTION SETTING • Pr ess the MENU but t on to close the menu window . • Pr ess the RETURN but t on to mov e to the pre vious menu screen. DDC/CI (Displa y Data Channel Command Int er face) is a communication pro t ocol for communications bet ween a PC and Monit or .
71 P ARENT AL CONTR OL / R A TINGS L OCK S Y S TEM Ent er the passwor d, pre ss ‘0’ , ‘0’ , ‘0’ , ‘0’ on the remot e contr ol handset. Select L OCK. 2 Select Lock Sy st em. 3 Select On or Off . 1 • When you select On, the Lock Syst em is enable.
72 P ARENT AL CONTR OL / R A TINGS SET P ASSW ORD Select L OCK. 2 Select S S e e t t p p a a s s s s w w o o r r d d . Input the passw ord. 3 Choose an y 4 digits for your new passw or d. As soon as the 4 digits are ent er ed, re-ent er the same 4 digits on the C C o o n n f f i i r r m m .
73 P ARENT AL CONTR OL / R A TINGS BL OCK CHANNEL Blocks an y progr ams that you do not want to wa tch or that you do not want y our childr en t o watch. This function is a vailable in Lock Sy st em “On” . Select L OCK. 2 Select Block Channel. 1 3 Q.
74 P ARENT AL CONTR OL / R A TINGS MO VIE R A TING Blocks movies according to the movie ra tings limits specified, so children cannot view certain movie s. Y ou can set the r atings limit b y blocking out all the movies with the r atings abo ve a specified le vel.
75 P ARENT AL CONTR OL / R A TINGS TV RA TING-CHILDREN Pr e vent s children fr om w atching cert ain childr en's TV pr ogr ams, according t o the r atings limit set.
76 P ARENT AL CONTR OL / R A TINGS TV RA TING-GENERAL Based on the r atings, blocks certain TV progr ams that you and your family do not want to view .
77 P ARENT AL CONTR OL / R A TINGS DO WNL O AD ABLE R A TING This function ma y become a vailable in the future and will be a vailable only for digital channel signal. This function oper at es only when TV has receiv ed Region5 Rating dat a. Select L OCK.
78 P ARENT AL CONTR OL / R A TINGS INPUT BL OCK Enables you to block an input. Select L OCK. 2 Select I I n n p p u u t t B B l l o o c c k k . 1 3 Select input sour ce.
79 No pictur e & No sound No color , poor color , or poor pictur e P oor r eception on some channels Lines or streaks in pictur es Horizont al/v ertical bars or pictur e shaking Pictur e appears slowly aft er switching on A Check whether the product is turned on.
80 APPENDIX N N o o A A u u d d i i o o . . A Pr ess the V OL + + or - - but t on. A Sound mut ed? Pre ss MUTE but t on. A T ry another channel. The problem ma y be with the broadcast. A Ar e the audio cables installed properl y? A Adjust B B a a l l a a n n c c e e in menu option.
81 APPENDIX T T h h e e s s c c r r e e e e n n i i m m a a g g e e l l o o o o k k s s a a b b n n o o r r m m a a l l . . A Adjust the P osition menu in OSD.
82 MAINTENANCE Car eful and r egular cleaning can ext end the amount of time you can enjoy your new set. Caution: Be sur e t o turn the pow er off and unplug the pow er cor d before you begin any cleaning.
83 APPENDIX PR ODUCT SPECIFICA TIONS ■ The specifications shown abov e may be changed without prior notice for qualit y impro vement. Po w e r AC 1 00-2 4 0 V ~ 5 0 / 6 0 Hz 0.9A On Mode : 5 0 W ( t yp.) Sleep Mode 1 W( R GB ) Off Mode 1 W L CD Panel Screen T ype Pixel Pitch 5 4 6.
84 APPENDIX PR ODUCT SPECIFICA TIONS ■ The specifications shown abov e may be changed without prior notice for qualit y impro vement. Po w e r AC 1 00-2 4 0 V ~ 5 0 / 6 0 Hz 1.0 A On Mode : 5 5 W (t yp.) Sleep Mode 1 W( R GB ) Off Mode 1 W L CD Panel Screen T ype Pixel Pitch 5 8 4.
85 APPENDIX PR ODUCT SPECIFICA TIONS ■ The specifications shown abov e may be changed without prior notice for qualit y improv ement. Po w e r AC 1 00-2 4 0 V ~ 5 0 / 6 0 Hz 1.
86 APPENDIX IR CODES A Configur ation of fr ame 1st fr ame R epeat fr ame A Lead code A R epeat code A B B i i t t d d e e s s c c r r i i p p t t i i o o n n A F F r r a a m m e e i i n n t t e e r r v v a a l l : : T T f f The w a veform is tr ansmit t ed as long as a k e y is depre ssed.
87 APPENDIX EXTERNAL CONTR OL DEVICE SETUP R S-2 3 2C Setup Connect the R S-2 3 2C (serial port) input jack to an e xt ernal control device (such as a comput er or an A/V contr ol s y stem) to control the pr oduct’ s functions ext er- nally . Connect the serial port of the control device t o the R S- 2 3 2C jack on the product back panel.
88 APPENDIX Use this function t o specify a set ID number . R efer to ‘R eal Dat a Mapping’ . p p . . 9 9 1 1 Set ID Select OPTION. 2 Select Set ID. 3 adjust S S e e t t I I D D t o choose the desir ed set ID number . The adjustment r ange of SET ID is 1 to 99 .
89 APPENDIX Command R efer ence List C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 1 9. Channel T uning DA T A (Hex adecimal) C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N .
90 APPENDIX 0 0 1 1 . . P P o o w w e e r r ( ( C C o o m m m m a a n n d d : : k k a a ) ) T o control P ower On/Off of the set. T r ansmission [k][a][ ][Set ID][ ][Data][Cr] Dat a 00: P ower Off Dat.
91 APPENDIX 1 1 2 2 . . O O S S D D S S e e l l e e c c t t ( ( C C o o m m m m a a n n d d : : k k l l ) ) T o select OSD (On Screen Displa y) on/off. T r ansmission [k][l][ ][Set ID][ ][Data][Cr] Dat a 00: OSD off Da t a 0 1: OSD on Ackno wledgement [l][ ][Set ID][ ][OK/NG][Data][x] 1 1 3 3 .
92 APPENDIX St ep NTSC Air NTSC Cable A TSC Air A TSC Cable_std A TSC Cable_hrc A TSC Cable_irc A TSC cable_auto Re serv ed ... Re serv ed 1 0 0 1 1 0 0 1 1 x 1 2 0 0 0 0 1 1 1 1 x 1 3 0 0 0 0 0 0 0 0.
P/NO : 3 8 40TRL098E (0 80 1-REV00) www .lge.com.
Make sur e to read the Saf et y Precautions bef ore using the product . K eep the Owner ’s Manual( CD) in an acces sible place f or futur e ref erence. The model and serial number of the SET is l oc at ed o n th e ba c k an d on e si d e of t h e SE T .
An important point after buying a device LG Electronics M2362D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics M2362D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics M2362D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics M2362D you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics M2362D will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics M2362D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics M2362D.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics M2362D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics M2362D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
