Instruction/ maintenance manual of the product LSE3092S LG Electronics
Go to page of 11
E L E C T R I C R A N G E MODEL S P/NO : MFL57205802 www.lg.com ENGLISH ESPAÑOL INSTALL ATION M ANUAL Please read these instructions thoroughly before installing and operating the range.
2 Par t 1 SAFETY 1 BEFORE YOU BEGIN Remove all tape and packing materials before using the range. Dispose of all plastic bags after unpacking the range.
3 Par t 1 SAFETY P ARTS PROVIDED NOTE • Read all instructions contained in these installation instructions before installing range. • Remove all packing materials from the oven compartments before connecting the electrical supply to the range. • Observe all governing codes and ordinances.
INST ALLA TION DRA WINGS (LRE/LSRE Series only) NOTE SAVE FOR THE USE OF THE LOCAL ELECTRICAL INSPECTOR. CLEARANCES AND DIMENSIONS (Figure 1) To install range refer to the following Figure 1. For installation in CANADA, a Free-standing range is not to be installed closer than 15 / 32 (12mm) from any adjacent surface.
5 INST ALLA TION DRA WINGS (LSE Series only) NOTE SAVE FOR THE USE OF THE LOCAL ELECTRICAL INSPECTOR. CLEARANCES AND DIMENSIONS (Figure 1) To install range refer to the following Figure 1. For installation in CANADA, a Free-standing range is not to be installed closer than 15 / 32 (12mm) from any adjacent surface.
The Cord/Conduit connecti on plate is used for the installation of power cord or conduit. For power cord, install it with the connection plate as INSTALLED. For conduit, remove the connection plate located below the rear of the drawer body and use the conduit hole (1 1 / 8 ”) instead of power cord hole (1 3 / 8 ”).
7 Par t 3 ELECTRICAL CONNECTIONS FIGURE 7 FIGURE 8 3-wire connection Assemble the strain relief to the 1 3 / 8 ” opening in Conduit connection plate Separate Strain Relief before installation 3-wire.
8 Par t 3 ELECTRICAL CONNECTIONS Follow the instructions under “ CONNECT RANGE CORD ” on page 5 to correctly install the strain relief. 1. Remove the lower 3 screws from the terminal block and retain them. (Refer to Figure 9.) Remove the ground screw and retain it.
9 Par t 3 ELECTRICAL CONNECTIONS 1. Follow the instructions under “Install the conduit as follows” on page 7 to correctly install the strain relief. DO NOT install the conduit without a strain relief. 2. Loosen the 2 lower left and right screws from the terminal block.
Replace the access cover on the range back. To replace the wire cover, insert double projections in the pockets located below the opening and tighten the three screws. ANTI-TIP DEVICE INST ALLA TION 1. Locate the bracket using the template An Anti-tip bracket is packaged with template.
Printed in Mexico Para comunicarse con L G Electronics 2 4 horas al día, 7 días a la semana: 1-800-2 43-0000 (EE . UU .) O visít enos en la W eb en: w ww .lg.c om T o contact L G Electronics 2 4 hours a day , 7 days a week: 1-800-2 43-0000 (U.S.A.) Or visit us on the W eb at: w ww .
An important point after buying a device LG Electronics LSE3092S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics LSE3092S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics LSE3092S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics LSE3092S you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics LSE3092S will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics LSE3092S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics LSE3092S.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics LSE3092S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics LSE3092S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
