Instruction/ maintenance manual of the product LRSC26925SW, LSRC26923SW, LRSC26925TT, LSRC26923TT LG Electronics
Go to page of 36
LRSC26925SW LRSC26923SW LRSC26925TT LRSC26923TT.
2 Entry Important Saf ety Instruction Identification of P arts Where to Locate Door Removal Door Replacement W ater Pipe Installation W ater C onnection Instruction Guide Operation Instruction Guide H.
Introduction th is gu ide a s a per man ent r eco rd of y our pur cha se. St apl e you r r e cei pt he r e. Date of purchase : : : : : : Dealer Dealer address Dealer phone no. Model no. Serial no. Important safety Instructions W ARNING W ARNING CA UTION Y ou can be killed or seriously injured if you don’t follow instructions.
Introduction Before replacing a burned-out light bulb, unplug the refrigerator or turn off power at the circuit breaker or fuse box in order to avoid contact with a live wire filament. (A burned-out light bulb may break when being replaced). NOTE: Setting either or both controls to the OFF position does not remove power to the light circuit.
Introduction IMPORT ANT : Please read carefully TO CONNECT ELECTRICITY GROUNDING REQUIREMENTS Sho c k Haza r d Electrical FOR PERSONAL SAFETY , this appliance must be properly grounded. Have the wall outlet and the circuit checked by a qualified electrician to make sure the outlet is properly grounded.
Identification of Parts Introduction • If you find some parts missing from your unit, they may be parts only used in other models. (i.c. the Optichill is not included in all models) NOTE Freezer Com.
Introduction Select a Good Location Where to Locate 1. Place your appliance where it is easy to use. 2. Avoid placing the unit near heat sources, direct sunlight, or moisture. 3. To avoid vibrations, the appliance must be leveled. 4. Do not install this refrigerator in areas where the ambient temperature is below 41 ° F.
Door removal Failure to do so could result in death or serious injury. If your entrance door is too narrow for the refrigerator to pass through, remove the refrigerator door and pass the refrigerator laterally. Electric Shock Hazard Disconnect electrical supply to refrigerator before installing.
Door replacement Feed water tube installation Push the refrigerator sideways through the entrance door as shown in the right picture. Automatic icemaker operation needs water pressure of 21.3~121psi(lb/inch 2 ) (That is, a 7oz. paper cup will be filled within 3 sec.
W ater Connection Instruction Guide Read all directions carefully before you begin. Connecting the Refrigerator to a W ater Source Connect to potable water supply only. W arning • If operating the refrigerator before installing the water connection, turn icemaker to the OFF position to prevent operation without water.
1. Unplug refrigerator or disconnect power. 2. Turn OFF main water supply. Turn on the nearest faucet to relieve the pressure on the line. It may help to open an outside faucet to allow the water to drain from the line in the house. 3. Find a 1/2-inch to 1-1/4-inch vertical COLD water pipe near the refrigerator.
Operation Instruction Guide Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet. • If your refrigerator does not have a water filter, we recommend installing one. If your water supply has sand or particles that could clog the screen of the refrigerator’s water valve.
Ice is clumped together When ice is clumped together, take the ice clumps out of the ice storage bin, break them into small pieces, and then place them into the ice storage bin again. When the icemaker produces too small or clumped ice, the amount of water supplied to the ice maker must be adjusted.
Height Adjustment Level the door by inserting flat ( - type) driver into the groove of the left height adjusting screw and rotating it clockwise . Level the door b y inserting flat ( - type) driver into the groove of the right height adjusting screw and rotating it cl ockwise .
Starting Adjusting The T emperatures and Functions When your refrigerator is first installed, allow it to stabilize at normal operating temperatures for 2 - 3 hours prior to filling it with fresh or frozen foods. If operation is interrupted, wait 5 minutes before restarting.
Operation 1. Buzzer sound mute Mode The buzzer sound is set to OFF. It activates by sounding the recognition sound of “Ding~” after pressing and holding “ICE PLUS” button more than 5 seconds. It inactivates when resetting the mode power. 2. Display Power saving Mode It places display in standby mode until door is opened.
Operation Freezer Compartment temperature adjustment Setting temperature BAR Indication Setting temperature BAR Indication Refrigerator Compartment temperature adjustment COLD COLDEST COLD COLDEST COL.
The automatic icemaker can automatically make 8 cubes at a time, 120~150 pieces per day. This quantity may vary by circumstance, including ambient temperature, door opening, freezer load. etc. Icemaking stops when the ice storage bin is full. If you don't want to use automatic icemaker, turn the icemaker switch to OFF.
Operation How to Use Dispenser Select among crushed ice, water, and cubed ice and press the push switch with a glass or other container. The Other Functions Ambient T emperature Display Window . Temperature is displayed only between 16 ° F ~ 120 ° F.
Operation Throw away the ice (about 20 pieces) and water (about 7 glasses) first made after refrigerator installation. This is also necessary when the refrigerator has not been used for a long time. Keep children away from the dispenser. Children may play with or damage the controls.
Operation 1 3 2 1 2 3 Shelf W ine Holder (Applicable to some models only) The refrigerator compartment shelf is movable so that you can place it at a height according to space requirement of foods. Slide Shelf Pull the shelf ahead and take off it while lifting both front and rear part.
Operation Egg Bin (Applicable to some models only) Humidity control in the vegetable compartment You can place the egg box wherever you want it. The humidity can be controlled by adjusting the humidity control switch to the left or right when storing vegetabes or fruits.
Operation OptiChill T emperature T ransition Corner (Applicable to some models only) OptiChill By pressing the button, store vegetables, fruits or other types of food such as meat to be defrosted, raw fish, etc. T emperature Change at OptiChill You can select optimum temperature range depending on types of foods stored.
Suggestion on Food Storage Location of Foods (Refer to Identification of Parts) Store wine. Store small foods such as bread, snacks, etc. Store various frozen foods such as meat, fish, ice cream, frozen snacks, etc. Store small packed frozen food.
Suggestion on Food Storage Storing Foods Store fresh food in the refrigerator compartment. How food is frozen and thawed is an important factor in maintaining its freshness and flavor. Do not store food which spoils easily at low temperatures, such as bananas and melons.
Care and Maintenance How to Dismantle Parts Freezer Compartment Lamp Dispenser Lamp Freezer Compartment Shelf Door Rack and Support Ice Storage Bin After Dispenser Is Used Seperate the lamp by pulling it out, and then remove the lamp. Max. 15 W bulb for refrigerator is used and can be purchased at a service center.
Care and Maintenance To remove the lamp cover, press the protrusion under the lamp cover to the front and then pull the lamp cover out. Turn the bulb counterclockwise.
Care and Maintenance General Information Cleaning During average length vacations, you will probably find it best to leave the refrigerator in operation.
Care and Maintenance T roubleshooting Before calling for service, review this list. It may save you both time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Possible cause Refrigerator control is off.
Care and Maintenance Refrigerator compressor does not run. Occurrence T emperature in the freezer is too cold but the refrigerator temperature is satisfactory . T emperatures are too cold T emperature in the refrigerator is too warm but the freezer temperature is satisfactory .
Care and Maintenance Sound and noise Occurrence Louder sound levels when refrigerator is on. Louder sound levels when compressor comes on. Moisture collects on the inside walls of the refrigerator . Moisture forms on the outside of the refrigerator or between doors.
Care and Maintenance Odors in refrigerator Occurrence Door(s) will not close. Door(s) will not close. Drawers are difficult to move. Dispenser Dispenser will not dispense ice Opening/Closing of doors/Drawers Possible cause Food is touching shelf on top of the drawer Track that drawer slides on is dirty.
Care and Maintenance Dispenser will not dispense ice. Ice dispenser is jammed. Occurrence W ater has an odd taste and/or odor . Dispenser will not dispense water . Possible cause Water has been in the tank for too long. Unit not properly connected to cold water line.
LG ELECTRONICS, INC. LG REFRIGERA T OR LIMITED W ARRANTY - USA Your LG Refrigerator will be will repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship under n.
Notes.
P / N o . 38 2 8 J L 8 7 97 A.
An important point after buying a device LG Electronics LRSC26925SW, LSRC26923SW, LRSC26925TT, LSRC26923TT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics LRSC26925SW, LSRC26923SW, LRSC26925TT, LSRC26923TT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics LRSC26925SW, LSRC26923SW, LRSC26925TT, LSRC26923TT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics LRSC26925SW, LSRC26923SW, LRSC26925TT, LSRC26923TT you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics LRSC26925SW, LSRC26923SW, LRSC26925TT, LSRC26923TT will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics LRSC26925SW, LSRC26923SW, LRSC26925TT, LSRC26923TT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics LRSC26925SW, LSRC26923SW, LRSC26925TT, LSRC26923TT.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics LRSC26925SW, LSRC26923SW, LRSC26925TT, LSRC26923TT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics LRSC26925SW, LSRC26923SW, LRSC26925TT, LSRC26923TT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
