Instruction/ maintenance manual of the product LDS4821(WW LG Electronics
Go to page of 43
DISHW ASHER SER VICE MANUAL BEFORE SERVICING THE UNIT , PLEASE READ THIS MANUAL CAREFULL Y FOR SAFETY AND CORRECT SERVICES. NOTE MODEL : LDS4821(WW ,BB,ST) MFL37554804(S/M) 2008.
- 3 - 1. CAUTION ..................................................................................................................... .... 4 2. SPECIFICA TIONS ..........................................................................................
- 4 - DISCONNECT POWER CORD BEFORE SER VICING RECONNECT ALL GROUNDING DEVICES IMPORT ANT SAFETY NOTICE ! This service information is intended for individuals possessing adequate backgrounds of electrical, electronic and mechanical experience. Any attempt to repair this appliance may result in personal injury and property damage.
- 5 - 2. SPECIFICA TION Rated V oltage / Frequency AC 120V/60Hz Installation Built-In Place Settings 16 Product Dimension(in) 23 3/4 x 24 5/8 x 33 5/8 Product Weight(lbs) 89lbs Door Color .
- 6 - LDS4821 serise 3. WIRING DIAGRAM MFL37554804(S/M) 2008.4.1 4:33 PM 페이지6 001 GateRip_A3.
- 7 - 4. FEA TURES & TECHNICAL EXPLANA TION 4-1. Product Features If you raise the Upper Rack, you can load large dishes in the Lower Rack. (Max. 14 in.) The tall tub provides large dishes loading as well as large capacity . LG dishwashers let you load oversized items in the Lower and Upper Rack.
- 8 - 4-2. Display Panel LDS 4821 Series PROCESS INDICA TOR (SignaLight TM ) • Current program phase is indicated. INDICA TOR • Child Lock( ): Lamp will turn on when Child Lock setting is on. • Rinse Aid( ): Refill with rinse aid when Lamp turns on.
- 9 - PROGRAM • Press the program that corresponds to your desired wash cycle. CANCEL & CHILD LOCK • T o cancel a running cycle, open the door , then press and hold the POWER SCRUB and NORMAL buttons together for 3 seconds. The drain pump will be activated and the cycle will be canceled.
Normal W ater Level : 270 - 10 - 4-3. TEST MODE LDS4821 Series CHECK PROGRAM BUTTON The number of pushing button To p Display Load and Checking points Door open/ closed RINSE+NORMAL +POWER S/W 1 T.
- 11 - 5. P ARTS NAME The appearance and specifications may be varied without notice according to localities. 5-3. LDS 4821 Series INST ALL BRACKET WOOD SCREW Control Panel Front Display .
- 12 - 6. PROGRAM CHART(SCHEMA TIC DIAGRAM) Program chart LDS 4821 Series MFL37554804(S/M) 2008.4.1 4:33 PM 페이지1 2 001 GateRip_A3.
- 13 - - 13 - BEFORE DISASSEMBLING THE DISHW ASHER ; 1) Remove the cord from electric outlet to avoid electric shock. 2) Close the W ater T ap (faucet). 3) Remove all dishes and items in the dishwasher . 4) Remove the Lower Rack and the Upper Rack. 5) Remove the inlet hose and drain hose connetion to avoid the hose damages.
- 14 - - 14 - Controller Latch Assembly Controller 3-1. Door Assembly 1) Front Cover Open the door . Remove 6 screws(stainless). 2) Control Panel Assembly Remove 8 screws(Stainless). Remove the wire connections. Be sure the wiring should not be changed in reassembling Remove the Latch assembly .
- 15 - - 15 - Fan Assembly Inner Cover Gasket Flange Hose Detergent Dispenser Door Hinge Air Duct Door Bracket H inge Bracket H inge Spring 3) Fan Assembly Open the door . Remove 4 screws and a earth screw for Door Bracket. Remove the wire connetions.
- 16 - - 16 - Lead Wire Holer Hook Lead Wire Holer Lower Frame Drain Hose D rain Hose H older 4. Lower Frame 1) Press the holder hook as shown in figure. 2) Remove 4 screws. 6. Drain Hose Holder 1) Press the holder hook as shown in figure. 2) Pull the Drain Hose and remove the Drain Hose Holder .
- 17 - - 17 - 7. Base Cover 1) Remove 2 screws. 2) Pull the Base Cover out. 8. Harness & Hose Assembly 1) Remove the wiring connections. 2) Remove the Hose connections from Sump Assembly . Y ou can see the information of Wiring Diagram at the back of Lower Cover .
- 18 - - 18 - Inlet V alve Cabinet Base Air Braker Nut Gasket Air Braker Assembly 9. Cabinet Base 1) Remove 8 screws. 2) Lift it upward. 10. Inlet V alve 1) Y ou can disassemble the lnlet V alve by removing the 2 screws. 1 1. Air Braker Assembly 1) Disconnect the 3 hoses assembly .
- 19 - - 19 - Sump Holder Hook Sump Assembly 1) Heater & Drain Motor Pull the Heater out of the Sump after releasing the nut. Remove 3 screws. 2) V ario Motor Remove 2 screws for V ario Motor . Pull the V ario Motor and Micro S/W . 3) Soil Sensor Pull the Soil Sensor .
- 20 - - 20 - 13. Holder Supporter , T ub Packing and Hinge Supporter Assembly . When you reassemble the Sump Assembly , be careful not to kink, tear and take off the seals. Y ou must take of f Stopper Roller(F1 17) by – screwdriver to change the Rail Assembly .
- 21 - - 21 - A. TROUBLE SHOOTING ACCORDING T O DISPLA YED ERROR MESSAGE ERROR MESSAGE POSSIBLE CAUSE REMEDY FOR ERROR OCCURRENCE The W ater Supply T ap is closed. The W ater Supply is shut of f. The Inlet Hose is kinked. The W ater Pressure is very low .
- 22 - - 22 - ERROR MESSAGE POSSIBLE CAUSE REMEDY FOR ERROR OCCURRENCE The Inlet V alve is troubled. The Controller is troubled. The Inlet W ater T emperature is very high. (over 194 ) Wiring connection is OK? The Thermistor is OK? Wiring connection is OK? The Impeller of W ashing Pump is locked.
- 23 - - 23 - No Power on when the power button pressed. The Power connection is correctly connected. The Fuse or Circuit Breaker of house is O.K? The Power Switch or the Circuit is O.K? • Re-connect the Powr connection. • Check the electricity is failed or not.
- 24 - - 24 - The W ash Pump/Motor does not run. The Door is tightly closed? The Wiring connections is OK? The Blade is not locked by a small and sharp object? • close the Door tightly . • Check the Door Switch in Latch Handle. • Re-connect the wiring connections related to the W ashing Motor .
- 25 - - 25 - W ashing Results are not Satisfactory After washing, are there still White deposits or streaks on the dishes? NO After washing, are there still food soils on the dishes? YES Check that : - the amount of detergent Correctly used or not - Filters clogged or not.
- 26 - - 26 - Power Button not automatically off after operation. Check the button is blocked by foreign materials. Check the Power Switch.(Replace it, if necessary .
- 27 - - 27 - 9. INST ALLA TION INSTRUCTION Step 1: PREP ARE CUPBOARD OPENING 1. This dishwasher is designed to fit a standard dishwasher opening as shown below . 2. Select a location as close to sink as possible for easy connections to water and drain lines.
- 28 - - 28 - WARNING For personal safety , remove house fuse or open circuit breaker before installation. Do not use an extension cord or adapter plug with this dishwasher . Electrical and grounding connections must comply with the national electrical code/provincial and municipal code and/or other local codes.
- 29 - - 29 - Step 3: PREP ARE THE W A TER SUPPL Y CONNECTION 1. This dishwasher may be connected to either hot or cold water . If the water can not be maintained below 149 (65 ), the dishwasher must be connected to cold water . 2. When connecting the dishwasher water line, sealing tape or compound should be used to avoid leaks.
- 30 - - 30 - 1. Remove the Lower Cover and orient dishwasher as shown below . 2. Before sliding the dishwasher into the cupboard opening, make all necessary height adjustments using the legs. 3. Slide the dishwasher into the cabinet opening carefully .
- 31 - - 31 - Step 6: DRAIN LINE CONNECTION 1. If the end of the drain hose does not fit to the drain line, use an adapter (not supplied) that must be resistant to heat and detergent and may be obtained from a plumbing shop. 2. There are 2 typical connections as shown in Figures C & D.
- 32 - - 32 - Step 7: W A TER SUPPL Y CONNECTION 1. When connecting, sealing tape or sealing compound should be used to avoid water leaks. 2. Before connecting, turn of f the water supply . 3. After fitting the Elbow into the Inlet V alve, slide the Flexible Stainless T ube or Copper T ube into the Elbow .
- 33 - - 33 - Step 9: FINAL CHECKS 1. T urn electrical power back on at the circuit breaker . 2. T urn house water supply back on. 3. Operate the dishwasher through one cycle (Quick cycle is recommended) to check for water leaks and operating conditions.
- 34 - - 34 - ACCESSORIES E 005 10. EXPLODED VIEW MFL37554804(S/M) 2008.4.1 4:33 PM 페이지3 4 001 GateRip_A3.
- 35 - - 35 - F101 E 005 E010 F103 F102 F001 M210 A040 M262 M270 M261 M260 A160 A130 EXPLODED VIEW MFL37554804(S/M) 2008.4.1 4:33 PM 페이지3 5 001 GateRip_A3.
- 36 - M086 F045 F060 F050 F022 M090 F043 F01 1 F013 F1 17 F144 F1 10 F132 F143 F1 17 F210 F01 1 F013 M006 M005 F171 F014 F041 F040 F042 EXPLODED VIEW - TUB ASSEMBL Y MFL37554804(S/M) 2008.
- 37 - A1 10 A050 F191 F192 F004 F005 A070 A060 A074 A073 A150 A140 A141 A142 A151 A152 A080 A101 A102 A103 EXPLODED VIEW - RACK ASSEMBL Y MFL37554804(S/M) 2008.
K260 K252 K254 K262 K200 K230 K220 K20 1 K006 K251 K203 EXPLODED VIEW - P ANEL ASSEMBL Y - 38 - MFL37554804(S/M) 2008.4.1 4:33 PM 페이지3 8 001 GateRip_A3.
K002 A120 K030 K001 K122 K1 10 K121 K101 F174 F142 F141 K124 K140 K100 - 39 - EXPLODED VIEW - DOOR ASSEMBL Y MFL37554804(S/M) 2008.4.1 4:33 PM 페이지3 9 001 GateRip_A3.
- 40 - M001 M1 10 M038 M025 M035 M130 M036 M007 M087 M060 M081 M120 M034 M088 M027 M028 M026 M050 M221 M031 M220 EXPLODED VIEW - SUMP ASSEMBL Y MFL37554804(S/M) 2008.
- 41 - 1 1. REPLACEMENT P ART LIST *001 MANUAL ASSEMBL Y ,OWNERS AFN316667 48 1 *002 BOX,CART ON 3890DZ3015A 1 *003 MANUAL,SERVICE MFL37554804 0 E 005 ACCESSORY ASSEMBL Y 5001DD4001A 1 1 1 A040 COVER .
- 42 - F101 P ACKING 3920DD3002A TOP 1 F102 P ACKING MFZ42591601 SIDE RIGHT 1 F103 P ACKING MFZ42591701 SIDE LEFT 1 F1 10 RAIL ASSEMBL Y 5219DD2002A 1 F1 17 STOPPER,ROLLER 4620ED3001A 2 F132 P ACKING .
- 43 - DESC P ART No. COMMENTS Q'ty LOC M005 GASKET MDS37912401 SUMP GASKET 1 M006 SUMP ASSEMBL Y AJH31248602 2 M007 SUMP AJH32598001 1 M025 V AL VE,CHECK MJX32862501 V ARIO 1 M026 MOTOR ASSEMBL .
P/No. : MFL37554804 MFL37554804(S/M) 2008.4.1 4:33 PM 페이지1 001 GateRip_A3.
An important point after buying a device LG Electronics LDS4821(WW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics LDS4821(WW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics LDS4821(WW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics LDS4821(WW you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics LDS4821(WW will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics LDS4821(WW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics LDS4821(WW.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics LDS4821(WW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics LDS4821(WW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center