Instruction/ maintenance manual of the product L197WH LG Electronics
Go to page of 26
M ake sure to read the Important Precautions before using this product. Keep the User's Guide (CD) in an accessible place for future reference. S ee the attached label on the unit and show this information to your dealer when asking for service.
A1 This unit has been engineered and manufactur ed to ensure your personal safety , however improper use may r esult in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display , observe the following basic rules for its installation, use, and servicing.
A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
Connecting the Display A3 Unfolding the stand base Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. 1. Place the monitor with its front facing downward on a soft cloth.
A4 Connecting the Display 1. Face the front of the monitor dislpay. Than gently push the monitor backwards, following the sequence shown in the picture below. Folding the stand base Tilt range 1. Make sure that the angle of the panel is set for your comfort.
Connecting the Display A5 T o adjust the height Scope of adjusting the height : maximum 4.76 inches (121 mm) 121 mm.
A6 Connecting the Display 2 Using the Computer 1. Make sure to turn off the computer and product. Connect the cable as below sketch map form to . Wall-outlet type PC-outlet type MAC Power Cord 1 2 Mac.
A7 Connecting the Display T o arrange the cables 1. Insert and screw the cable holder into the hole in the back of the stand until it will not turn any more as shown in the following figure. Cable Holder 2. After connecting the cables neatly, arrange the cables to the Cable Holder as shown in the following figure.
6 A8 Control Panel Functions MENU Button Use this button to enter or exit from the On Screen Display. Control Function OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that these settings are not inadvertently changed.
A9 Control Panel Functions This Indicator lights up as blue when the display is operating normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color will changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to selection an icon in the On Screen Display.
A10 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the display's image size, position and operating parameters is quick and easy with the On Screen Display Contr ol system(OSD). A short example is given below to familiarize you with the use of the controls.
A11 On Screen Display (OSD) Selection and Adjustment NOTE The order of icons may differ depending on the model (A11~A16). The following table indicates all the On Screen Display contr ol, adjustment, and setting menus.
A12 On Screen Display (OSD) Selection and Adjustment NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Y ou wer e introduced to the procedur e of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu.
On Screen Display (OSD) Selection and Adjustment A13 Main menu Sub menu Description BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images.
A14 On Screen Display (OSD) Selection and Adjustment MENU : Exit : Decrease : Increase SET : Select another sub-menu Main menu Sub menu Description CLOCK PHASE SHARPNESS To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change.
A15 On Screen Display (OSD) Selection and Adjustment Press the button to reset immediately. If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal.
A16 On Screen Display (OSD) Selection and Adjustment Icons Menu Name Sub-menu Name Main menu Sub menu Description To adjust the USER sub-menu function, Press the SET Button MOVIE TEXT NORMAL USER When you execute F-ENGINE, two tones will appear on the screen as shown.
A17 T roubleshooting No image appears Check the following before calling for service. No image appears Do you see a "OSD LOCKED" message on the screen? ● Is the power cord of the display c.
A18 T roubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, vertical bars or stripes are visible. ● Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO/SET button to automatically adjust your display image to the ideal setting.
A19 A19 T roubleshooting Have you installed the display driver? ● Have you installed the display driver? ● Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display.
A20 Specifications Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt/Height Range Power Input Environmental Conditions 19 inches (48.1 4 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.
A21 Specifications Indicator On Mode Sleep Mode Off Mode blue amber Off LED Color MODE Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq.
A22 Specifications Signal Connector Pin Assignment 1 8 9 17 24 16 Pin Signal(DVI-D) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T. M. D. S. Data2- T. M. D. S. Data2+ T. M. D. S. Data2/4 Shield T. M. D. S. Data4- T. M. D. S. Data4+ DDC Clock DDC Data Analog Vertical Sync.
A23 Installing the W all mount plate Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.
A24 Specifications Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. 1 2.
Digitally yours.
An important point after buying a device LG Electronics L197WH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics L197WH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics L197WH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics L197WH you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics L197WH will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics L197WH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics L197WH.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics L197WH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics L197WH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
