Instruction/ maintenance manual of the product iCAM4100R LG Electronics
Go to page of 11
COPYRIGHT © 2007 LG ELECTRONICS USA INC, ALL RIGHTS RESERVED. LG IrisAccess™ 4000: iCAM4100 Quick Start Guide The content of this document is furnished for informational use only , is subject to change without notice, and should not be construed as a commitment by LG Electronics USA Incorporated.
1 P acking List What’ s in the box • iCAM4100 - IrisCamera • P ower Adapter Input: 110~240V AC - 1.5AMP 50/60Hz Output: 12V DC - 5.0AMP • P ower Cable for 110V • CA T5 Ethernet Cable • Qui.
T he iCAM4100 is a two-eye iris camera used to capture the iris images of the user . T he iCAM includes an alignment indicator behind the mirror and voice prompts to assist the user . A V acuum Fluorescent Display (VFD) displays system time , date , and user guidance .
• The recommended mounting height for the iCAM4100 is 140cm (55 inches) from the floor to the bottom of the unit. T his mounting height can be adjusted to accommodate the average user height at the installed location. • High amounts of ambient light must be avoided.
1. Remove the three security screws (use included security bit wrench) from the bottom of the iCAM. 2. While gently pulling the cover upward, pull forward simultaneously . 3. Unscrew the installation plate screw and slide the body of iCAM4100 upward to separ ate from the installation plate .
5 iCAM4100 Installation (cont’ d) 196 5 <hole> 6.4801 156 15 16 6 6 49.5 Hole 6 45 29 16.2 7.6 2.2 139 208 Dimensions and Screw Holes in the Installation Plate (mm unit) Dimensions of iCAM4100 (mm unit) Installation Plate 80 62 .8 35 .5 217 235.
6. Route the power line , network line, and other necessary cables through the installation plate hole. 7. Using the appropriate fasteners for the material in which the iCAM will be mounted, secure the installation plate . 8. Slide the iCAM4100 body into the installation plate and fasten it with the retaining screw .
Changing the IP Address of the iCAM * Note: The IP Address of each iCAM must be changed individually . Do not connect more than one un-configured iCAM to the network at any one time to avoid IP Address conflicts . Any computer with a web browser which supports graphics (ex.
5. Select Network Settings . 6. Enter the new IP address for the iCAM (default = 192.168.5.100) 7. Enter the new Subnet Mask for the iCAM (default = 255.255.255.0) 8. Enter the new Broadcast Address for the iCAM (default = 192.168.5.255) 9. Enter the new Default Gateway for the iCAM.
Once all iCAMs have been configured Once all iCAMs have been configured, the computer IP Address can then be changed back to its original IP Address or to the new IP Address as required to communicate to the rest of the IrisAccess™ system.
T echnical Support Additional information and T echnical assistance is available on the LG Electronics – Iris T echnology Division’ s support web site at www .
An important point after buying a device LG Electronics iCAM4100R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics iCAM4100R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics iCAM4100R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics iCAM4100R you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics iCAM4100R will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics iCAM4100R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics iCAM4100R.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics iCAM4100R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics iCAM4100R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
