Instruction/ maintenance manual of the product GA6400 LG Electronics
Go to page of 56
www .lg.c om Please read this manual carefully before operating your set and retain it for future reference. P /NO : MFL6 7 468182 (1302-REV01) O WNER’S MANU AL LED TV * LG LED TV applies LCD screen with LED backlights.
2 ENG ENGLISH T ABLE OF CONTENTS T ABLE OF CONTENTS 2 T ABLE OF CONTENTS 3 IMPORT ANT SAFETY INSTRUCTIONS 7 Viewing 3D Imaging 9 LICENSES 10 INST ALLA TION PROCEDURE 10 ASSEMBLING AND PREP ARING 10 Un.
3 ENG ENGLISH IMPORT ANT SAFETY INSTRUCTIONS IMPORT ANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. y Do not use this apparatus near water. Short-circuit Breaker Power Supply y Clean only with a dry cloth.
4 ENG ENGLISH IMPORT ANT SAFETY INSTRUCTIONS y Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Short-circuit Breaker Power Supply y Only use attachments/accessories specified by the manufacturer.
5 ENG ENGLISH IMPORT ANT SAFETY INSTRUCTIONS y Grounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet).
6 ENG ENGLISH IMPORT ANT SAFETY INSTRUCTIONS y Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV.
7 ENG ENGLISH IMPORT ANT SAFETY INSTRUCTIONS Viewing 3D Imaging W ARNING Viewing Environmen t y Viewing Time - When watching 3D content, take 5 - 15 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain.
8 ENG ENGLISH IMPORT ANT SAFETY INSTRUCTIONS CA UTION Viewing Environmen t y Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D content. If you feel discomfort in viewing 3D content, move further away from the TV.
9 ENG ENGLISH LICENSES Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
10 ENG ENGLISH INST ALLA TION PROCEDURE / ASSEMBLING AND PREP ARING INST ALLA TION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available.
11 ENG ENGLISH ASSEMBLING AND PREP ARING F or GA6400, GA6450 series QWERTY Remote Control, Batteries (AA) (See p.33) Owner’s Manual, CD Manual Power Cord Cinema 3D Glasses Stand Base, Stand Body (See p.16) Stand Screws 8 EA, M4 x 14 (See p.16) Wall Mount Inner Spacers 4 EA (See p.
12 ENG ENGLISH ASSEMBLING AND PREP ARING F or GA7900 series QWERTY Remote Control, Batteries (AA) (See p.33) Owner’s Manual, CD Manual Power Cord Cinema 3D Glasses Stand Base, Stand Body (See p.17) Stand Screws 8 EA, M4 x 14 (See p.17) IR Blaster Cable (See p.
13 ENG ENGLISH ASSEMBLING AND PREP ARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies.
14 ENG ENGLISH ASSEMBLING AND PREP ARING Parts and Butt ons Button Description / (^ / v) Scrolls through the saved channels. / (+ / -) Adjusts the volume level. (OK ⊙ ) Selects the highlighted menu option or confirms an input. (SETTINGS) Accesses the main menus, or saves your input and exits the menus.
15 ENG ENGLISH ASSEMBLING AND PREP ARING Lifting and moving the T V When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. y It is recommended to move the TV in the box or packing material that the TV originally came in.
16 ENG ENGLISH ASSEMBLING AND PREP ARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand.
17 ENG ENGLISH ASSEMBLING AND PREP ARING 3 1 2 Stand base Stand body F ront M4 x 14 4 EA M4 x 14 4 EA F or GA7900 series.
18 ENG ENGLISH ASSEMBLING AND PREP ARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm (4 inches) 10 cm 2 Connect the power cord to a wall outlet.
19 ENG ENGLISH ASSEMBLING AND PREP ARING Mounting on a wall An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV.
20 ENG ENGLISH ASSEMBLING AND PREP ARING Tidying cable s 1 Gather the cables with the stand rear cover. y Do not move the TV by holding the cable holder and cable management clip, as the cable holders may break, and injuries and damage to the TV may occur.
21 ENG ENGLISH MAKING CONNE CTIONS MAKING CONNE CTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
22 ENG ENGLISH MAKING CONNE CTIONS Network connection Connect the TV to a router with a LAN cable. Or, connect with Wi-Fi by accessing Network Setup in the initial Setup Wizard. For seamless internet streaming LG recommends a stable 4 Mbps broadband speed and 1.
23 ENG ENGLISH MAKING CONNE CTIONS Connecting to a HD r eceiver D VD Player or VCR Connect a HD receiver, DVD Player or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV.
2 4 ENG ENGLISH MAKING CONNE CTIONS AUDIO OUT DVI OUT (*Not Pro vided) (*Not Pro vided) DVD / Blu-Ray / HD Cable Box I N A V ( Audio in) 2 3 1 4 / DVI IN (MHL) It does not matter which port you use. Choose any HDMI/DVI input port to connect . D VI to HDMI Connection Transmits the digital video signal from an external device to the TV.
25 ENG ENGLISH MAKING CONNE CTIONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. y Connect the mobile phone to the HDMI IN 4 (MHL) port to view the phone screen on the TV.
26 ENG ENGLISH MAKING CONNE CTIONS IN COMPONENT A V VIDEO AUDIO Y P B P R VIDEO AUDIO L R DVD / Blu-Ray / HD Cable Box (Use the component video cable pro vided.
27 ENG ENGLISH MAKING CONNE CTIONS Composit e Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration.
28 ENG ENGLISH MAKING CONNE CTIONS Connecting a PC y It is recommended to use the TV with an HDMI connection for the best image quality.. y Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness.
29 ENG ENGLISH MAKING CONNE CTIONS AUDIO OUT DVI OUT (*Not Pro vided) PC I N A V ( Audio in ) 2 3 1 4 / DVI IN (MHL) Choose any HDMI/DVI input port to connect .
30 ENG ENGLISH MAKING CONNE CTIONS Connecting to an Audio Sy stem You may use an optional external audio system instead of the built-in speaker. y If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature to off.
31 ENG ENGLISH MAKING CONNE CTIONS Connecting a USB Device Connect a USB storage device such as USB flash memory, external hard drive, or a USB memory card reader to the TV. Choose any USB input port to connect . It does not matter which port you use.
32 ENG ENGLISH MAKING CONNE CTIONS Using IR Blaster Universal remote control setting enables user to control multiple devices with a single remote controller. In order to continue the setting, please check, if IR Blaster and other devices are connected with TV properly.
33 ENG ENGLISH REMO TE CONTROL REMO TE CONTROL Inserting batteries When you use the remote control for the first time, you should insert the batteries to remote control. 1. Open the batt er y cover as shown below . 2. Insert the the batterie s to the remote c ontrol.
34 ENG ENGLISH REMO TE CONTROL Remot e Control Side - F ront (PO WER) T ur n th e TV o n o r o ff . HOM E A cc e s s t he h om e s cr e en . GUI DE A cc e s s t he E PG o n co nn e c t e d s et - t op bo x . ( A va il ab l e on l y o n Li v e TV) OK S el ec t i te m by p u sh in g k ey .
35 ENG ENGLISH REMO TE CONTROL QWER TY Side - Back y To enjoy Onlive application, you should purchase the onlive controller. (www.onlive.com) NOTE EXT PWR (F n+Z) T ur n on / o ff e xt e r na l d e vi.
36 ENG ENGLISH REMO TE CONTROL Regis tering the r emote contr ol The Remote Control operates by pairing with your TV. When turning the TV on for the first time, please pair the remote to the TV. How to register the remote control Press the Pointer button to pair the remote control.
37 ENG ENGLISH W A T CHING TV W A T CHING T V T urning the T V on f or the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet.
38 ENG ENGLISH TROUBLESHOO TING / OPEN SOURCE SOFTW ARE NOTICE TROUBLESHOO TING Problem Resolution Cannot control the TV with the remote control. y Check the remote control sensor on the product and try again. y Check if there is any obstacle between the product and the remote control.
39 ENG ENGLISH SPE CIFICA TIONS SPE CIFICA TIONS Product specifications may be changed without prior notice due to upgrade of product functions. Power requirement AC 100 ~ 240 V ~ 50 / 60 Hz Televisio.
40 ENG ENGLISH SPE CIFICA TIONS Wireles s LAN module (WN8122E1) specification Standard IEEE802.11a/b/g/n Frequency Range 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz Output Power (Max.) 802.11a: 16.5 dBm 802.11b: 16 dBm 802.11g: 15.5 dBm 802.11n - 2.
41 ENG ENGLISH MAINTENANCE MAINTENANCE Cleaning Y our T V Clean your TV regularly to keep it at peak the best performance and to extend the product lifespan.
.
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display C o n g r a t ul a t i o n s o n yo u r p u r c h a s e ! As y o u e n j o y y o u r n e w p ro d u c t , please keep .
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. ww w .lg.
2 ENG ENGLISH 2 KEY CODES KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 45 Q.
3 ENG ENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV . Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally .
4 ENG ENGLISH 4 EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack T ype • Y ou need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV , which is specified in the manual. * For other models, connect to the USB port.
5 ENG ENGLISH 5 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable.
6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP T ransmission / Receiving Protocol T ransmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV . (j, k, m or x) [Command 2] : Second command to control the TV .
7 ENG ENGLISH 7 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) ► T o control Power Off of the set. T ransmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack [a][ ][Set ID][ ][OK/NG][Data][x] ► T o Show Power On.
8 ENG ENGLISH 8 EXTERNAL CONTROL DEVICE SETUP 09. T int (Command: k j) ► T o adjust the screen tint. Y ou can also adjust tint in the PICTURE menu. T ransmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10.
9 ENG ENGLISH 9 EXTERNAL CONTROL DEVICE SETUP * Digital T errestrial/Cable/Satellite [Data 00][Data 01]: Channel Data Data 00 : High Channel data Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0.
10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Da.
1 1 ENG ENGLISH 1 1 EXTERNAL CONTROL DEVICE SETUP 22. 3D(Command: x t) (only 3D models) (Depending on model) ► T o change 3D mode for TV . T ransmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [ ].
.
The model and serial number of the TV is located on the back and one side of the T V . R ecord it belo w should you ever need service. MODEL SERIAL L G Customer Inf ormation Center F or inquires or comment s, visit www .lg.com or call; 1-800-2 43-0000 USA, Consumer User Regist er your pr oduct Online! www .
An important point after buying a device LG Electronics GA6400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics GA6400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics GA6400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics GA6400 you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics GA6400 will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics GA6400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics GA6400.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics GA6400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics GA6400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
