Instruction/ maintenance manual of the product 57M LG Electronics
Go to page of 27
Color Monitor USER GUIDE MANUEL D'UTILISA TION MODEL : 57M.
i FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ii T able of Contents Introduction........................................................................................A1 Monitor Registration ..........................................................................A2 Important Precautions ......
A1 Introduction Thank you for purchasing an LG color monitor . This monitor supports OSD, DDC2B and Sound. It will give you high resolution performance and operation in a variety of video operating modes. It is compatible with standard PC type personal computers.
A2 Monitor Registration The model and serial numbers are found on the rear of this unit. These numbers are unique to this unit and not available to others. Y ou should record requested information here and retain this guide as a permanent record of your purchase.
A3 Important Precautions This unit has been engineered and manufactured to assure your personal safety , but improper use can result in potential electrical shock or fire hazard. In order not to defeat the safeguards incorporated in this monitor , observe the following basic rules for its installation, use, and servicing.
A4 Keep children from dropping or pushing objects into the monitor's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor . During a lightning storm or when the monitor is to be left unattended for an extended period of time, unplug it from the wall outlet.
A5 Installing the Tilt/Swivel Base T urn of f the equipment and all attached options. Carefully set the monitor face-down with the underside facing you. Installation 1.Align the hooks on the tilt/swivel stand with the matching slot on the base (underside of the monitor).
A6 Installation The supply voltage is marked on the ID label located on the rear panel of the monitor . If your local voltage is different, do not use the monitor and contact your supplier before using the display . Connections T o connect your monitor after the video adapter is properly installed: 1.
A7 Front View Rear View Location and Function of Controls AC Power Socket D-Sub Signal Cable ID Label Power (DPMS) Indicator Power ON/OFF Button Brightness Contrast Microphone Jack Headphone Jack Cont.
A8 Control Panel Function Buttons on the front of the monitor allow you to adjust the image easily through an OSD menu. As you choose controls, the selected icon shows you what the chosen control will do. These pictures give you immediate understanding of the controls.
A9 OSD Select/Adjustment Control Use these buttons for selecting (highlighting) an OSD icon to be adjusted. It is also used for selecting the level of the selected item to be adjusted. Sound Menu: T o adjust sound menu. Sound Mute Used to select mute on (means sound off) and mute of f (means sound on).
A10 On Screen Display(OSD) Selection and Adjustment Y ou were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD H POSITION U U 1024X768/85Hz ADJ: MENU: T o move picture image left and right.
A11 T o correct image rotation. T ilts the screen image left. T ilts the screen image right. T o adjust Horizontal and V ertical image size simultaneously . Smaller the image size. Bigger the image size. If the monitor is operating in a factory preset mode, this control will reset the image to the factory preset mode.
A12 T o select OSD display time. (5~120 seconds) T o choose the language in which the control names are displayed. Language T o select color temperature, 9300K/ 7200K/ user . Decreases the amount of color in the image. Increases the amount of color in the image.
A13 T o inform users of preset and user mode data. T o disappear of the OSD on the screen. OSD U U MENU : SEL: 1024X768/85Hz USER MODE: 5 PRESET MODE: 6 INFORMATION Information OSD Adjust Description Exit PRESET MODE 1 31.4kHz / 70Hz 2 37.5kHz / 75Hz 3 46.
A14 VOLUME 1024X768/85Hz ADJ: MENU: 30% OSD Adjust Description TREBLE 1024X768/85Hz ADJ: MENU: 30% BASS 1024X768/85Hz ADJ: MENU: 30% BALANCE 1024X768/85Hz ADJ: MENU: 0% MICROPHONE 1024X768/85Hz ADJ: MENU: Raises or lowers audio level. Raises or lowers treble level.
A15 Power Management System This monitor incorporates new circuitry for lowering energy usage during idle time, following the Display Power Management Signalling (DPMS) guide lines of the Video Electronics Standards Association (VESA), and is certified as exceeding the EP A's Energy Star program for reduced power usage.
A16 Video Memory Modes This multi-synchronous auto-scanning monitor can automatically detect and display several video modes falling within the monitor's scanning range of 30-70kHz Horizontal and 50-120Hz V ertical.
A17 A note about the video memory modes: There is a total of 37 video memory modes, generally more modes than you will use at any one time. Of these 37 modes, 6 are permanent, factory fixed modes that cannot be changed, and another 6 are set at the factory , but may be overwritten to make more room.
A18 Microphone Operation On the left side there is a MIC (Microphone) jack. By plugging a microphone in here, it may reduce the long length of cable needed to reach the PC's sound card.
A19 Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an anti- static screen coating.
A20 T roubleshooting Symptom: SELF DIAGNOSTICS message. Possible causes: The signal cable is not connected. Symptom: OUT OF FREQUENCY message appears. Possible causes: The frequency of the sync input is outside the operating range of the monitor .
A21 Service 1. Unplug the monitor from the wall outlet and refer servicing to qualified service personnel when : The power cord or plug is damaged or frayed. Liquid has been spilled into the monitor . The monitor has been exposed to rain or water . The monitor does not operate normally following the operating instructions.
A22 Specifications Sync Signal type T ype Separate sync H. sync H. sync V . sync V . sync Pin Separate Sync 1 Red 2 Green 3 Blue 4 Ground 5 Self-T est 6 Red Ground 7 Green Ground 8 Blue Ground 9 NC 10 Ground 1 1 Ground 12 SDA 13 Horiz.
A23 Specifications Picture tube 15 inch (13.8 inches viewable) FST , Non-glare, 90 degree deflection, Darkface, 0.28 mm dot pitch Sync Input Horizontal Freq. : 30kHz - 70kHz (Automatic) V ertical Freq. : 50Hz - 120Hz (Automatic) Input Form : Separate, TTL, positive/negative Signal input : 15 pin D-Sub connector Video Input Display Area : 10.
A24 Monitor Limited W arranty for the United States and Canada LG Electronics U.S.A., Inc. will repair or at its option replace, without charge, your product which proves to be defective in material or workmanship under normal use, during the warranty period listed below from the date of original purchase.
An important point after buying a device LG Electronics 57M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics 57M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics 57M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics 57M you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics 57M will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics 57M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics 57M.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics 57M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics 57M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
