Instruction/ maintenance manual of the product 52SX4D-UB LG Electronics
Go to page of 104
DLP Projection TV OWNER’S MANUAL MODELS: 52SX4D / 6 2 SX4D 52SX4D-UB / 62 SX4D-UB LG Electronics U.S.A., Inc. TM R T ruSurround XT Please read this manual carefully and completely before operating your TV . Retain this manual for future reference. Record model number and serial number of the TV in the spaces provided below .
2 DLP Projection TV W ARNING/CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P AR TS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
Owner ’s Manual 3 TV Guide On Screen Notices for U.S.A. TV Guide On Screen Notices for U.S.A. Digital Cable Compatibility Digital Cable Compatibility This digital television is capable of receiving basic analog, digital basic and digital premium cable television programming by direct connection to a cable system providing such programming.
4 DLP Projection TV Safety Instructions IMPORT ANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appara- tus.
Owner ’s Manual 5 Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
6 DLP Projection TV Contents After reading this manual, keep it handy for future reference. W arnings /Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Digital Cable Compatibility . . . . . . . . . . . . . . . . . . . . . . . . .
Owner ’s Manual 7 Introduction Introduction Introduction POWER TV GUIDE VOL CH ENTER MENU POWER Button VOLUME ( F , G ) Buttons CHANNEL ( E , D ) Buttons Operation Indicator/ Lamp Indicator/ T emper.
8 DLP Projection TV Introduction PC/DTV (XGA/ 480p/ 720p 1080i) DVI RGB/DVI UPGRADE PORT / P R P B Y DTV/DVD RGB PC/DTV (XGA/ 480p/ 720p 1080i) PC/DTV (XGA /480p /720p /1080i) S-VIDEO P R P B Y MONO C.
Owner ’s Manual 9 Introduction LEFT/RIGHT AUDIO Used for stereo sound from vari- ous types of equipment. S-VIDEO A connection available on some very high- end equipment that provides bet- ter picture quality than video input. VIDEO Connects the video signals from any piece of equipment.
Introduction 10 DLP Projection TV MODE DA Y - DA Y + FLASHBK i APM CC FREEZE M/C EJECT TV INPUT TV/VIDEO V 1394 - When using the remote control, aim it at the remote control sensor on the TV . Remote Control Key Functions Remote Control Key Functions LIGHT Illuminates the remote control buttons of selected mode.
Owner ’s Manual 11 Introduction • Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). • Install two 1.5V AA batteries. Don ’ t mix old or used batteries with new ones. Replace cover .
12 DLP Projection TV Installation - W all Antenna Socket or Outdoor Antenna without a Cable Box Connections - For optimum picture quality , adjust antenna direction if needed. Antenna or Cable Connection Antenna or Cable Connection 1. Analog and Digital TV signals provided on antenna 2.
Owner ’s Manual 13 Note : The TV will let you know when the TV(analog antenna), DTV(digital antenna), CA TV(analog cable) and CADTV(digital cable) channel scans are complete. • T o improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly .
14 DLP Projection TV Installation • Component Input ports T o get better picture quality , connect a DVD player to the component input ports as shown below . Component ports on the TV Y P B P R Video output ports on DVD player Y Y Y Y Pb B-Y Cb P B Pr R-Y Cr P R How to connect 1.
Owner ’s Manual 15 Installation The TV has a special signal output capability which allows you to hook up a second TV or monitor . Connect the second TV or monitor to the TV ’ s MONIT OR OUTPUT . See the Operating Manual of the second TV or monitor for further details regarding that device ’ s input settings.
16 DLP Projection TV Installation <When the PC supports DVI> How to connect 1. Connect the PC to HDMI1/DVI port of this TV with an HDMI-to-DVI cable(not supplied with this product). If you do not need to connect audio, HDMI2 port is also available for the DVI video connection.
Owner ’s Manual 17 Installation Send the TV ’ s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect 1.
18 DLP Projection TV Installation - HDMI TM , the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing. - This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI).
Owner ’s Manual 19 Installation Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Fiber Optic Digital Audio Cable (not supplied with the produ.
20 DLP Projection TV Installation How to use 1. Connect the HDMI1/DVI Source Devices(DVD Player or Set T op Box or PC) and the TV SET . 2. T urn on the display by pressing the POWER button on the TV SET and HDMI1/DVI Source Devices remote control. 3. Select HDM1/DVI Input source in Main Input option on the SETUP menu.
Owner ’s Manual 21 Installation PC/DTV (XGA /480p /720p /1080i) S-VIDEO P R P B Y MONO CABLE RGB INPUT COMPONENT INPUT2 INPUT1 DTV/DVD INPUT RGB/DVI INPUT (L) (R) AUDIO (L) (R) AUDIO VIDEO (L) (R) A.
22 DLP Projection TV Installation PC/DTV (XGA /480p /720p /1080i) S-VIDEO P R P B Y MONO CABLE RGB INPUT COMPONENT INPUT2 INPUT1 DTV/DVD INPUT RGB/DVI INPUT (L) (R) AUDIO (L) (R) AUDIO VIDEO (L) (R) A.
Owner ’s Manual 23 Installation Note : The G-LINK cable is necessary for the TV Guide On Screen system to work with your Cable Box and VCR. See Page 21~22 for G-LINK connection instructions.
24 DLP Projection TV Installation 2. Screen 2: Enter Zip or Postal Code Option 1 • If you selected USA in Screen 1, you see the ZIP Code screen. • Y ou input numbers by either pressing the number keys on the remote or using the D / E button to display a number, and then the F / G but- ton to move to another field.
Owner ’s Manual 25 Installation 6. Screen 6: Cable Box T uning Channel • Select the channel used for the cable box. • Press ENTER to display Screen 7. 7. Screen 7: Cable Box Configuration Diagram • The diagram shows the correct way to install the G-LINK Cable from the back of the device to the cable box.
26 DLP Projection TV Installation 8. Screen 8: Cable Box Brand Name • Use the D / E button to select a cable box brand. • Press ENTER to display Screen 9. 9. Screen 9: Cable Box Preparation • Follow the on-screen instructions, and press ENTER to display Screen 10.
Owner ’s Manual 27 Installation 14. Screen 14: Congratulations • Press ENTER to display Screen 15. 13. Screen 13: Are your basic settings correct? • If you select Y es, you see Screen 14. • If you select No, you see Screen 1. 12. Screen 12: Do you have an antenna connected? • If you select Y es, you see Screen 13.
28 DLP Projection TV Installation 17. Screen 17: VCR Brand Name • Use the D / E button to select the brand of the recording device. • Press ENTER , and you see Screen 18. 16. Screen 16: VCR Configuration Diagram • This screen shows the correct way to install the G-LINK TM Cable from the back of the TV to the Recording device.
Owner ’s Manual 29 Installation 18. Screen 18: VCR Preparation • Follow the on-screen instructions, and press ENTER to display Screen 19. 19. Screen 19: VCR Code T esting • When testing is done, Screen 20 displays automatically . 20. Screen 20: VCR T uned to Channel 9? • If you select Y es, you see Screen 21.
30 DLP Projection TV Installation 21. Screen 21: Confirming Y our Settings • V erify the Setup information is correct. • If it is, select Y es, end setup, and you see Screen 22. • If it is not, select No, repeat setup process, and you see Screen 1.
Owner ’s Manual 31 Operation - It's available to communicate to either direction and you can give and take a image, sound, or each control command with one cable. W W How to connect the 1394 • T o operate the IEEE1394, these methods are available as shown below .
32 DLP Projection TV Operation IEEE 1394 Functions IEEE 1394 Functions -When connecting the 1394 and then playing, you must use the original DVHS tape. If not, it may occur errors. -If the operation normally doesn ’ t work on Daisy Chain connection, please change an arrangement of connected device.
Owner ’s Manual 33 Operation DVHS DVHS W W How to play the DVHS <TV> <DVHS> 1. Connect the IEEE 1394 jack at the TV to the IEEE 1394 jack at the DVHS with IEEE 1394 Cable.
34 DLP Projection TV Operation IEEE 1394 Functions IEEE 1394 Functions • The control panel of MicroMV Camcorder -Depending on the connected equipment, marked control panel -may be different. 1. MicroMV Camcorder Model 2. Connected Equipment to the 1394 3.
Owner ’s Manual 35 Operation W W How to play the MicroMV Camcorder and DVHS MicroMV Camcorder and DVHS MicroMV Camcorder and DVHS 1. Synchronously , connect the IEEE 1394 jack of the TV to the IEEE 1394 jack of the DVHS and the MicroMV Camcorder with IEEE 1394 Cable.
36 DLP Projection TV Operation DTV Link DTV Link : DTV Link applies to 1394 connection of device labeled DTV Link logo. W W V How to play the DTV Link <DTV Link- Producer> 1. Connect the IEEE 1394 jack of the TV to the IEEE 1394 jack of the DTV Link supported device IEEE 1394 Cable.
Owner ’s Manual 37 Operation W W Don’t connect ! • When connecting with these 2 methods, the IEEE1394 will not work properly . (a) LOOP Connection <Connect the IEEE1394 Cable> <TV> &.
38 DLP Projection TV Operation - Y our new TV contains the TV Guide On Screen Interactive Program Guide. - The TV Guide On Screen system has features that help you get the most out of your viewing experience. • Three 30-minute time periods in a 16x9 aspect ratio.
Owner ’s Manual 39 Operation - The screens displayed in the TV Guide On Screen system share many of the same compo- nents, as shown in the following figure: • Video Window - displays TV video whil.
40 DLP Projection TV Operation • A Panel Menu appears when the Menu key is pressed on a highlighted tile and additional options are available. It also appears when you press ENTER on a show starting in the future. • When a Panel Menu appears, the highlighted tile changes color to indicate the Panel Menu relates to this tile.
Owner ’s Manual 41 Operation - Access Listings by pressing the TV Guide button on your remote or on the front panel of your TV . - Listings is always the first Service displayed in the Guide. - With Listings highlighted, press the Info button to display a Help screen.
42 DLP Projection TV Operation - Search lets you find shows by category (Alphabetical, Movies, Sports, Children, Educational, News, V ariety , Series, HDTV) or b y Keyword. - With Search highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen.
Owner ’s Manual 43 Operation 2. Use the E button to highlight a subcategory (for example, All). 3. Press ENTER to display a list of all Movies, organized by date and time.
44 DLP Projection TV Operation - Keyword search lets you enter a word(s) to look for a particular show by category or for every show title that matches. • Keyword Search 1. Highlight the Keyword navigation label, and press ENTER button to display the Keyword Search menu.
Owner ’s Manual 45 Operation The Guide stores all the keywords you create. T o edit or delete a keyword, highlight the keyword and press the Menu key . A Search Options menu is displayed. Go to Service Bar - closes the menu, changes no infor- mation, and returns to the Search Service Bar .
46 DLP Projection TV Operation - Schedule lets you review , edit, or delete Record and Remind events that you set previously . - With Schedule highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen.
Owner ’s Manual 47 Operation - After you complete the TV Guide On Screen system setup, you can come back and change its settings in the following areas: • Change System Settings • Change Channel Display • Change Default Options Highlight a choice, press ENTER , and follow the on-screen instruc- tions.
48 DLP Projection TV Operation Press ENTER to display the Channel Editor screen. Then, highlight a channel and press Menu. A Grid Options menu is displayed. Highlight Go Back to Setup to close the menu, change no infor- mation, and return to the Setup Service Bar .
Owner ’s Manual 49 Operation General Default Options lets you set defaults for the following: • The initial Info Box size when the TV Guide On Screen system is entered. Choices are No, Small, Large, and Last Used (Default = Last Used). • The Info Box size rotation when the Info key is pressed while in the TV Guide On Screen system.
50 DLP Projection TV Operation < Record Defaults> Record Default Options lets you set defaults for the following: • When to start the record event. Choices are 120 minutes early to 120 minutes late, to On time. (Default = On time) • When to end the record event.
Owner ’s Manual 51 Operation W Once — records the show one time W Regularly — records the show every time the show airs on the same channel and starts at the same time W Weekly — records the s.
52 DLP Projection TV Operation When finished, press ENTER to highlight Schedule Recording. Press ENTER again to close the menu. Y ou see a Record icon for the selected frequency next to the show title. Highlight Cancel to close the menu, change no information, and return to the highlighted show .
Owner ’s Manual 53 Operation • Use the F / G buttons to choose among Once, Daily , Weekly , and Off, as follows. W Once — records the time, channel, input, recorder combi- nation one time. W Daily — records the time, channel, input, recorder combi- nation Monday through Friday .
54 DLP Projection TV Operation Y ou can set a show Reminder in Listings, Search, and Schedule or change Reminder settings for a show in Schedule. There are 2 ways to set a show Reminder: 1) From a Panel Menu • Highlight a show , and press Menu to display the Episode Options menu.
Owner ’s Manual 55 Operation 2) Manual Reminder • Highlight the Schedule Service label, and press the Menu key to display the Schedule Options menu. • Use the D / E / F / G buttons to move through the options. Use the number or D / E / F / G buttons to change the information, as necessary .
56 DLP Projection TV Operation Based on your option settings, a notification screen will appear , if your TV is On at the reminder time. Y ou can then choose to hide the reminder , or highlight the show , and press ENTER to tune to the show .
Owner ’s Manual 57 Operation Notes: • If you intend to be away on vacation, disconnect the power plug from the wall power outlet. • The TV Guide On Screen and any CableCARD TM Software upgrades work while the TV is in standby • mode.
58 DLP Projection TV Operation TV Setup TV Setup - The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Language .
Owner ’s Manual 59 Operation - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. - Run EZ Scan again after any Antenna/Cable connection changes. - A password is required to gain access to EZ Scan menu if the Lock System is turned on.
60 DLP Projection TV Operation Setup Menu Options Setup Menu Options - Create two different types of channel lists in memory: “ Custom List ” and “ Favorite List ” from the default channel list created from the EZ Scan channel search. - A Custom List can be created by toggling each channel on or of f with ENTER button.
Owner ’s Manual 61 Operation - Changes the picture source so you can watch your off-air TV , cable TV , VCR, DVD, or any other devices that are connected to your TV . 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Main Input .
62 DLP Projection TV Operation - Adjust the picture appearance to suit your preference and viewing situations. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select the desired picture option ( Contrast , Brightness , Color , Sharpness , or Tint ) .
Owner ’s Manual 63 Operation - Other languages may be available if a digital signal is provided by the broad- casting station. 1. Press the EZ SOUND button repeatedly to select the appropriate sound setup as shown below: Custom (your own settings), Normal , Stadium , News , Music and Theater .
64 DLP Projection TV Operation 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select Front Surround . 3. Press the G button and then use D / E button to select Off , 3D EchoSound System or SRS (Sound Retrieval System) TruSurround XT .
Owner ’s Manual 65 Operation - T imer function operates only if current time has been set. - Off-T imer function overrides On-Timer function if they are both set to the same time.
66 DLP Projection TV Operation Auto Of Auto Of f f - If set to on and there is no input signal, the TV turns off automatically after 10 minutes. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto Off .
Owner ’s Manual 67 Operation Cinema 3:2 Mode Setup Cinema 3:2 Mode Setup Set up the TV for the best picture appearance for viewing movies. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Cinema 3:2 Mode .
68 DLP Projection TV Operation Caption Caption Digital Broadcasting System Captions - Choose the language you want the DTV/CADTV Captions to appear in. - Languages can be chosen for digital sources only if they are included on the program. 1. Press the MENU button and then use D / E button to select the OPTION menu.
Owner ’s Manual 69 Operation Caption Option Caption Option - Customize the DTV/CADTV captions that appear on your screen. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption Option .
70 DLP Projection TV Operation Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V -Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed.
Owner ’s Manual 71 Operation Parental Lock Setup Parental Lock Setup 1. Press the MENU button and then use D / E button to select the LOCK menu. Then, press the G button • Enter the password as requested. • The TV is set up with the initial password “ 0-0-0-0 ” .
72 DLP Projection TV Operation Cable menu options Cable menu options - The Cable sub menu displays when inserting the CableCARD TM to the TV . - The CableCARD TM type is Motorola, Scientific Atlanta (SA), or SCM etc. The OSD (On screen display) is different from your TV according to your CableCARD TM type.
Owner ’s Manual 73 Operation - If an emergency situation occurs during watching the TV/DTV/CA TV/CADTV , you can receive a message from cable TV service provider(s).
74 DLP Projection TV Operation - Y ou can use the JPEG and MP3 file by memorizing to Memory card in mode. Memory Card Memory Card Precaution for Using the Memory Card Precaution for Using the Memory Card Notes on Memory Card Notes on Memory Card This is a device equipment to communicate the data between A V external equipment.
Owner ’s Manual 75 Operation A A vailable Memory Card vailable Memory Card Slot 2 Slot 1 A sort of file Compatilbility Photo Image (JPEG) *.jpg - Some MagicStor Plus card is not complied with the TV . An error may occur if you use a memory card with greater than the specified capacity .
76 DLP Projection TV Operation Notes on Memory Card Notes on Memory Card How to insert and eject the card How to insert and eject the card The JPEG Decoding/The Image Preview Supplied Spec The JPEG De.
Owner ’s Manual 77 Operation 1. Press D / E / F / G button to select photo or music for slot1/2. 2. Press the ENTER button to enter the photo or music media. 3. Press the button to exit the mode. Notes: • The OSD of the ejected card slot is inactivated when ejecting the card with the hand.
78 DLP Projection TV Operation 1. Insert the memory card to Slot 1 and/or Slot 2 on the TV front panel. 2. Press the button. 3. Use D / E / F / G button to select photo media for slot1 or slot 2. 4. Press the ENTER button to enter the photo media. Note: It’s possible to display 15 JPEG files per page.
Owner ’s Manual 79 Operation Mark/Unmark for JPEG file Mark/Unmark for JPEG file - Y ou can mark/unmark the file to view the desired file or use slide show for desired file conveniently . - The selected file displays orange colour . When press the ENTER button after marking some file, the marked file displays green colour .
80 DLP Projection TV Operation JPEG File V JPEG File V iewing Options iewing Options The Image The Image Adjustment Adjustment 1. Press the D / E / F / G button to select JPEG file and then press the ENTER button. 2. Press the D / E button to select View and then press the ENTER button The selected image will display on entire screen.
Owner ’s Manual 81 Operation 1. Press the D / E / F / G button to select JPEG file and then press the ENTER button. 2. Press the D / E button to select Slide Show or Show Marked and then press the ENTER button. (If you mark the file with using MARK button, Show Marked is displayed on screen.
82 DLP Projection TV Operation 1. In photo media, select your desired JPEG file. 2. Press the INFO button. The file information for selected JPEG file is displayed. If JPEG file has no information, you can ’ t check it. 3. Press the ENTER , EXIT or INFO button to return to the photo list.
Owner ’s Manual 83 Operation Marked MP3 file number Current Playing Time/T otal Playing Time Current file number/T otal file number Using Card memory/ T otal Card memory Direct Buttons Play Delete Cancel 1. Insert the memory card to Slot 1 and/or Slot 2 on the TV front panel.
84 DLP Projection TV Operation W W Stop Playback Press the A button to stop playback. Note: If you replay the MP3 file after stopping, the highlighted MP3 file on menu will play . W W Pause Playback 1. Press the II button to pause playback. 2. Press the II or button to starts from the point of your paused part.
Owner ’s Manual 85 Operation • Press the , , buttons. The screen saver is released but the MP3 is continued. - , : Return to a initial portion of the playback MP3. - : Playback the next MP3. • If you press other button, the screen saver is released and the MP3 is stopped.
86 DLP Projection TV Operation MP3 File Playing Operation MP3 File Playing Operation - Use i t to check information for selected MP3 file. -I t ’ s impossible to delete the music during playback. 1. In music media, select your desired MP3 file. 2. Press the INFO button.
Owner ’s Manual 87 Operation - PIP lets you view 2 dif ferent inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. - T win Picture mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time.
88 DLP Projection TV Operation In PIP mode, press the D / E / F / G button to move the sub picture to a different location on the screen. Use the D / E / F / G button to change main and sub picture sizes in T win Picture mode. If screen is adjusted to the maximal size, the large screen appears the black part at both the up and down sides.
Owner ’s Manual 89 Operation APM (Adaptive Picture Mode) - Allows a viewer to select their preferred picture mode after compairing the four different picture ( Daylight , Normal , Night Time - and Custom ) settings. 1. Press the APM button at once. As shown below , the screen is divided to 4-split.
90 DLP Projection TV Operation 4 : 3 16 : 9 Screen Ratio of Input Signal 4:3 Screen Ratio of Input Signal 16:9 Resolution of Input Signal 720x480i Resolution of Input Signal 720x480p Resolution of Input Signal 1280x720p Resolution of Input Signal 1920x1080i Multilingual : Input Signal have over two Audio infor- mation.
Owner ’s Manual 91 Operation 1. Press the FREEZE button in DTV 720p, or 1080i modes. 2. Use the D / E / F / G buttons to select the screen split zoom section. 3. T o return to normal viewing, press the FREEZE button ag ain. - Enlarges the picture with correct proportions.
92 DLP Projection TV Operation Close POSITION G SIZE PHASE RESET Adjust D F G E Previous POSITION SIZE PHASE RESET Adjust Close POSITION SIZE G PHASE RESET Adjust D F G E Previous POSITION SIZE PHASE .
Owner ’s Manual 93 Programming the Remote G The remote is a multi-brand or a universal remote . It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands.
94 DLP Projection TV Programming Codes Programming Codes Programming Codes VCRs VCRs CA CA TV TV AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSON.
Owner ’s Manual 95 Programming Codes Audio Audio APEX DIGIT AL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNA VOX 013 MARANTZ 024 MITSUBISHI 002 NAD 023 ONKYO 008 01.
96 DLP Projection TV T roubleshooting Checklist No picture & No sound • Check whether the TV is turned on. • Is the power cord inserted into wall power outlet? • T est the wall power outlet, plug another product ’ s power cord into the outlet where the TV ’ s power cord was plugged in.
Owner ’s Manual 97 T roubleshooting Checklist Poor TV input signal • Check ANTENNA and CABLE connection. No channel or a few channel • Start EZ Scan. Poor Video signal • Check ANTENNA and CABLE connection. Unsuitable Aspect Ratio • Y ou can adjust the RA TIO button or Aspect Ratio in the OPTION menu.
98 DLP Projection TV T roubleshooting Checklist T T roubleshooting Checklist roubleshooting Checklist I set a show to Auto-T une and it did not. • Check the Schedule menu and verify that the show is listed as a Reminder . • Highlight the show under Listings and do the following: W Press the Menu key on the remote.
Owner ’s Manual 99 Maintenance 1. Here ’ s a great way to keep the dust of f your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it ’ s almost dry , and then use it to wipe the screen.
100 DLP Projection TV Product Specification • The specifications shown above may be changed without prior notice for quality improvement. Product Specifications Product Specifications MODEL Horizontal Size (inches) Height (inches) Depth (inches) Weight (lbs.
Owner ’s Manual 101 Notes Notes.
102 DLP Projection TV Notes Notes.
LG ® Brand Customer Interactive Center P . O. Box 240007 201 James Record Road Huntsville, Alabama 35824 A TTN: CIC T elephone number: 1-800-243-0000 This number is a toll-free number Follow menu prompts when the call is answered Web address: www .lgservice.
P/N : 3828V A0540A (3828VB0002M) Y our LG ® brand DLP Rear Projection T elevision will be repaired or replaced as set forth below , if it proves to be defec- tive in material or workmanship under nor.
An important point after buying a device LG Electronics 52SX4D-UB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics 52SX4D-UB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics 52SX4D-UB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics 52SX4D-UB you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics 52SX4D-UB will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics 52SX4D-UB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics 52SX4D-UB.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics 52SX4D-UB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics 52SX4D-UB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
