Instruction/ maintenance manual of the product 42LT770H LG Electronics
Go to page of 76
Automated Installation Routine Wizard pages 1 1 – 14 Custom Master TV Setup pages 15 – 18 Cloning Information pages 29 – 37 FTG Mode of Operation pages 38 – 39 EXPERIENCED INST ALLER Commercial Mode Setup Guide Note: Selected features shown in this guide may not be available on all models.
2 206-4214 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________ Serial No._______________ W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
3 206-4214 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accor- dance with the manufacturer ’s instructions.
4 206-4214 (Continued from previous page) 22. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, follow the precautions below .
5 206-4214 T able of Contents S a f e t y W a r n i n g s ..................................... 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 4 T a b l e o f C o n t e n t s ...................................
6 206-4214 Commercial Mode Overview This document describes how to set up L T770H Pro:Centric ® TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Ch.
7 206-4214 Commercial Mode Overview (Cont.) T ypical Installer Menu TV Setup Menus Installer Menu T o creat e a Mast er T V Set up, you wil l need to know how to acc es s the com me rci al contr ol ler (PTC ) Inst al ler Menu and make chang es to the def aul t val ues as requ ire d.
8 206-4214 FTG Mode This mode enables Pro:Idiom ® decryption and also allows logical channel mapping of physical channels to remove the need for dash tuning. T V o pe rat ion i n F TG Mo de is ba se d o n whi ch el eme nt of t he T V own s the FT G Log ic al Ch ann el Ma p—t he CP U o r the E BL.
9 206-4214 Pro:Centric Operation Pro:Centric TV Interactive Menu Features When running the Pro:Centric application, the interactive Pro:Centric TV enables guests to locate and select television entert.
10 206-4214 Pro:Centric Setup Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide .
1 1 206-4214 The Automated Installation Routine Wizard will appear on the screen each time the TV is turned ON, until one of its conguration methods has been completed or the wizard is exited.
12 206-4214 Automated Installation Routine Wizard (Cont.) Auto Co nfigu rati on Proce ssing Pr o:Cen tric Con figur ation. Step 2 may tak e up to 15 min(s ).
13 206-4214 Automated Installation Routine Wizard (Cont.) (Continued from previous page) RF Conguration a) In the Media T ype eld, use the Left/Right arrow keys to select RF .
14 206-4214 Automated Installation Routine Wizard (Cont.) USB Con figur atio n Co nf i gu r in g T V Ple as e wa it. .. 95% W arn ing - Do n ot r emo ve t he US B de vic e du rin g th is p roc ess Plea se sel ect con figu rat ion fil e (*.t lx) xxL T770H-UA 00001 .
15 206-4214 Custom Master TV Setup Channel Auto Tuning (Channel Lineup) Manual Tuning Channel Edit Channel Label Picture Picture Mode Audio Auto V olume Clear V oice Sound Mode Balance TV Speaker Time.
16 206-4214 Custom Master TV Setup (Cont.) 2. Set Installer Menu items. This step p rovid es sp ecic inst ructi on onl y on the I nstal ler M enu i tems that should be s et on a Ma ster TV . Refer t o pag es 19 to 2 7 for deta iled infor mation on a ll In stall er Me nu it ems.
17 206-4214 Use the TV setup menus to set the TV features to the desired configuration for the end user . PICT URE A U DI O INP UT OPT IO N TIM E Sma rtSh ar e CHA NN EL L OC K Custom Master TV Setup (Cont.
18 206-4214 Custom Master TV Setup (Cont.) 6. (Optional) Add Custom Channel and Aux Input Labels: 2-5-4 + MENU Mode Note: 2-5-4 + MENU Mode enables you to add/ed it channel icons and custo m text labels in the PTC once the Maste r TV Setup has been trans ferred as descri bed in the previo us step.
19 206-4214 Installer Menu T ypical Installer Menu Use the Installer Menu to set up, change, or view operational settings. Refer to the table on pag es 21 and 22 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing.
20 206-4214 Using the Installer Menu Refer to th e tab le starting on the next page fo r an overv iew of the avail able Insta ller Menu i tems, includ ing t heir item numbe rs, f uncti ons, v alue range s, an d def ault values .
21 206-4214 Installer Menu (Cont.) Installer Menu Items 000 through 075 Menu Item Function V alue Range Default V alue Brief Description of Function and Comments 000 INST ALLER SEQ 0 ~ 3 0 Leave default set to 0. 001 POWER MANAGE 0 ~ 7 0 Sets number of hours of no activity before automatic shutoff.
22 206-4214 Installer Menu Items 078 through 122 Menu Item Function V alue Range Default V alue Brief Description of Function and Comments 078 UPN MSB 0 ~ 255 0 User programmable number , most significant byte. 079 UPN MSB-1 0 ~ 255 0 User programmable number , most significant byte - 1.
23 206-4214 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INST ALLER SEQUENCE Species entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff.
24 206-4214 Installer Menu (Cont.) 010 - MUTE DISABLE Enables or disables sound mute function. If set to 1, sound cannot be muted. If set to 0, sound can be muted.
25 206-4214 Installer Menu (Cont.) 047 - AUX ST A TUS Set to 1 for MPI Aux source to be reported as a channel number instead of channel 0. Set to 0 to disable Aux identication change.
26 206-4214 093 - RJP A V AILABLE (Remote Jack Pack A vailable) • 0 = Remote jack pack is not available or disabled. • 1 = Legacy Model RJPs: HDMI Mode Enables RJP feature for use with full cable bundle models. In this mode, when an HDMI source is connected to the RJP , both digital video and audio are expected via the HDMI cable.
27 206-4214 1 16 - VIDEO MUTE EN (Video Mute Enable) Set to 0 for Normal. Set to 1 for Blank. 1 17 - F ACT DEF AUL T (Factory Default) Set to 0 for normal.
28 206-4214 Channel Icons / Custom T ext Labels (2-5-4 + MENU Mode) Changing a Channel’ s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel-T ime display .
29 206-4214 Cloning Overview IMPORT ANT CLONING INFORMA TION There are four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 15): • Using a USB memory device / .
30 206-4214 USB Cloning Procedures Learning / T eaching a Master TV Setup using a USB Memory Device / .tlx File USB Cloning Notes • Re ad the I MPO R T ANT CL ON ING I NFO RM A TI ON on pa ge 29 be fo re be gin ni ng any c lon in g p ro ced ure s.
31 206-4214 USB Cloning Procedures (Cont.) T each Master TV Setup to T arget TV 1. Turn ON the T arget TV . The next step depends on whether the Automated Installation Routine Wizard appears on the screen when you turn ON the TV : • If th e w iz ard i s d is pla yed , the TV is already in the required factory default state.
32 206-4214 USB Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup using a USB Memory Device / .tll File USB Cloning Notes • Read the IMPORT ANT CLONING INFORMA TION on page 29 before beginning any cloning procedures.
33 206-4214 T each Master TV Setup to T arget TV 1. Turn ON the T arget TV . The next step depends on whether the Automated Installation Routine Wizard appears on the screen when you turn ON the TV : • If th e w iz ard i s d is pla yed , the TV is already in the required factory default state.
34 206-4214 Clone Programmer Cloning Procedures Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Tune/set the TV to an analog channel or Aux input, and then, plug one end of the MPI cable into the TV MPI port.
35 206-4214 (Optional) Set the Clock Set the time on a Master TV’ s clock. (If the time has alrea dy been copied from a TV into the TLL-1 100A clone programm er , you can set the Master TV’ s clock by copying the time from the clone progra mmer .
36 206-4214 Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Tune/set the TV to an analog channel or Aux input, and then plug one end of the MPI cable into the TV MPI port.
37 206-4214 Clone Programmer Cloning Procedures (Cont.) (Optional) Set the Clock Set the time on a Master TV’ s clock. (If the time has alrea dy been copied from a TV into the L T2002 clone programm er , you can set the Master TV’ s clock by copyin g the time from the clone program mer .
38 206-4214 FTG Mode of Operation Overview FTG Mode via CPU This mode provides the following features: • Logical channels mapped to either RF or IP delivered content. • Digital RF channel minor (program) numbers up to 999. • FTG Channel Map of up to 600 logical channels.
39 206-4214 FTG Mode of Operation Overview (Cont.) PICT UR E A UD IO INP UT OPT IO N TIM E Sma rtS ha re CHA NN EL L OC K TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV is not in Pass-through Mode . While the TV is in this mode, Installer Menu settings can be accessed as read-only .
40 206-4214 FTG Mode via CPU Creating an FTG Conguration File using the FTG File Manager This section describes how to create an FTG Conguration (.tlx) le that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FTG Conguration le using the FTG File Manager .
41 206-4214 FTG Mode via CPU (Cont.) (Continued from previous page) Note: T o rem ove an indi vid ua l item from the FTG Confi gu rat io n List or the T V Set up Men u Lis t, cli ck on/ hig hli gh t the it em to be re mov ed , and the n cli ck th e Remo ve Item but to n dire ct ly ab ove the app lic ab le “Li st” wind ow .
42 206-4214 T eaching FTG Conguration to a TV This section describes how to “T each” an FTG Conguration le from a USB memory device to a TV . Ensure you have completed the procedure on the previous page to create the FTG Conguration le before proceeding with the steps below .
43 206-4214 FTG Mode via CPU (Cont.) 1. Turn ON the TV , and then plug a USB memory device into the USB IN port on the TV . 2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode).
44 206-4214 FTG Mode via CPU (Cont.) T ypical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Use Channel Menu options to run Auto T uning and edit the channel lineup, as necessary . Adjust the values for these Installer Menu items.
45 206-4214 FTG File Manager Utilities Overview Note: The data referenced in the FTG Conguration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list.
46 206-4214 FTG File Manager Utilities Overview (Cont.) FTG Channel Map Conguration Utility The FTG Channel Map Configuration Utility enables you to create, view , edit, and print a Logical Channel Map. PRINT MAP Click to display a printable FTG Channel Map Report.
47 206-4214 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map.
48 206-4214 FTG File Manager Utilities Overview (Cont.) CONFIGURA TION SETTINGS Select tabs for categories of Installer Menu items to set up TV . FTG Installer Menu Conguration Utility Notes: • The Pro:Centric tab enables you to set up Pro:Centric-specic parameters.
49 206-4214 IP Environment Setup The IP Enviro nment Menu enabl es you to set up the network features of the TV . With the exceptio n of Networ k Connecti on and Network Status settin gs, the IP Envir.
50 206-4214 Netwo rk Conn ecti on Confi gure IP and DNS modes. Auto (DH CP) or Stat ic OK Static DNS Mode 0 0 0 0 IP Mod e Auto (DH CP) IP Add ress Subne t Mask Gatew ay 0 0 0 0 0 0 0 0 Static Auto (DH CP) DNS Serv er 0 0 0 0 IP Environment Setup (Cont.
51 206-4214 2. Follo w the on -s cre en in st ruc tio ns to c omp le te the a ppr op ria te net wor k con g ura ti on. Us e the I nst all er Re mo te nav ig ate eld s and ma ke en tr ies , etc .
52 206-4214 IP Environment Setup (Cont.) Audi o PTS Of fs et Vi deo PTS Of fse t PCR Of fs et IGMP V ersion 0 0 0 < > < > < > Close 2 < > IP Stream Control If necessary , due t.
53 206-4214 IP Environment Setup (Cont.) Pro:Centric Setup Pro:Centric options enable you to congure the TV with the appropriate settings to connect to the Pro:Centric server . Use the Up/Down arrow keys on the Installer Remote to navigate between elds.
54 206-4214 IP Conguration 1. In the Media T ype eld, use the Left/Right arrow keys to select IP . Note: If th e Med ia T ype ha s alr eady b een s et in the Auto mated Inst allat ion R outine Wiza rd, t he speci ed va lue w ill b e re ected in t his e ld.
55 206-4214 1. With the IP Environment Menu on display , use the arrow keys on the Installer Remote to select Media Share . Then, press OK . 2. In the Media Share pop-up window , use the Up/Down arrow.
56 206-4214 Remote Jack Pack Setup RJP A vailable? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP A V AILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP A V AILABLE to 001). See Installer Menu detailed descriptions for further information.
57 206-4214 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin, note that the software upgrade les must be stored in a folder named “LG_DTV” in the root directory of the USB memory device. Also, ensure the USB device has been formatted with F A T format.
58 206-4214 Re fe r en ce : D o wn lo a di n g a S pl a sh S c re en us i ng a US B M em o ry D e vi c e Splash Screen Image File Guidelines • The splash screen image may be either a baseline (not progressive) JPEG or a 24-bit (RGB 8 x 8 x 8) BMP . • A JPEG image should be no larger than 1 MB.
59 206-4214 Reference: Power Consumption Settings The following tables assume that Installer Menu item 1 18 POWER SA VINGS is set to 003 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 202).
60 206-4214 Reference: TV Aux Input Conguration DIRECT ACCESS T uning TV ENABLE MPI DA T A ST ART AUX SOURCE ASSIGN- MENT Installer Menu MPI DA T A ST A TUS TYPE 0x41 SOURCES ENABLED (R/W) DA T A S.
61 206-4214 Reference: b -LAN Setup & Overview A b -LAN enabled head end device, such as an LG FMA-LG101, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b -LAN module to receive communication from the head end device.
62 206-4214 Reference: FTG Mode via EBL (Local Conguration) Laptop PC TV -L INK CFG AUDI O I N (RGB /DV I) SPE AKER OUT (8Ω) SER VIC E O NL Y LAN AUX L AN 1. Install (if necessary) and launch the FTG Device Configuration Application (v5.0.0 or higher) on the PC that will be used to configure the EBL.
63 206-4214 Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Input Auto-sensing Hierarchy Priority Video Audio 1st (Highest) Digital Video In Audio In (3.
64 206-4214 Thi s s ec tio n des cr ibe s h ow to r est ore f act or y d ef aul ts ei the r on a s in gle TV th at is c urr ent ly in P ass -t hro ugh or FTG M ode o r o n mul tip le TVs t hat a re cu rre ntl y in FT G M ode . Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV(s) to Pass-through Mode.
65 206-4214 Reference: TV Zone Restrictions The FT G Cha nn el Ma p E dit or in t he FTG F ile M ana ge r ’ s F TG Ch an nel Ma p Con g ura tio n Uti li ty en abl es you to a ssi gn Zo ne re str ic tio ns to ch an nel s tha t may be d eem ed un sui ta ble f or ce rta in lo cat io ns, f or exa mpl e, a ho tel l obb y .
66 206-4214 OPT ION OK Mov e > > • Caption : Off • Balloon Help : On • Set ID : 1 • Demo Mode : Off • Zone : 0 • TV Name : [TV] 207K JCZA 9J74 0 • Wi-Fi Screen Share Whe n the TV.
67 206-4214 RGB IN ( PC) AN TE N NA / CA BL E I N TV -LIN K C FG AUD IO I N (RG B/ DV I) SPE AK ER OUT (8 Ω) SER V IC E O NL Y RE S E T UP D A T E RJP INTERF A CE GA ME CO NT R OL /MPI RS-2 32C (S ER VI CE & EX T PO W ER ) VI D EO L / MO N O - A U D IO - R A V IN L R 2 / DV I I N 1 (AR C) LA N OPT IC AL DIG IT AL .
68 206-4214 Reference: External Speaker Setup The four-contact SPEAKER OUT jack on the L T770H rear panel provides stereo speaker level signal outputs (left +, left -, right +, right -) for a pair of 8 ohm external speakers. Outputs are variable based on the internal speaker volume level.
69 206-4214 Reference: Installer Remote Control T ypical Key Functions CH VOL 1 2 3 4 5 6 7 8 0 9 P A G E Q.MENU CHAR/NUM FLASHBK EXIT OK GUIDE PORT AL TV DVD INPUT MARK CC TIMER MUTE INFO PIP PIPCH+ PIPCH - SWAP PIP INPUT SAP MENU SETTINGS abc def ghi jkl mno pqrs tuv wxyz .
70 206-4214 T roubleshooting General T roubleshooting Some Quick and Easy T ips for Resolving Problems Symptom Possible Cause(s) Possible Solution(s) Installation Cannot direct enter channel number . (TV in Pass-through Mode) Installer Menu item 028 CH.
71 206-4214 T roubleshooting (Cont.) T roubleshooting Flow Chart Controller Quick Check ST A TUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Y es No No Y es Cycle the power by removing and reconnecting the AC Power cord.
72 206-4214 T roubleshooting (Cont.) Commercial Mode Check / FTG Operation T roubleshooting TV turned ON? Y es No Press POWER on Installer Remote. TV is not in Commercial Mode. Call T echnical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Y es Press MENU repeatedly as if to access the Installer Menu.
73 206-4214 Cautio n: If the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port, as this will damage the clone programmer .
74 206-4214 Glossary of T erms Automated Installation Routine Wizard Lodging model TV conguration wizard that provides conguration options for Pro:Centric operation as well as an option for using a USB memory device to cong- ure a TV for FTG Mode via CPU.
75 206-4214 Document Revision History / Open Source Software Notice Open Source Software Notice Document Revision History Date Description September 2012 Revision A: New document October 2012 Revision B: Automated Installation Routine Wizard, IP Environment Menu, and Wi-Fi Screen Share updates Product documentation is available online at: www .
206-4214 Revision B © Copyright 2012 LG Electronics U.S.A., Inc. For Customer Support/Service, please call: 1-888-865-3026 www .LGsolutions.com Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric is a registered trademark of LG Electronics Inc.
An important point after buying a device LG Electronics 42LT770H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics 42LT770H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics 42LT770H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics 42LT770H you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics 42LT770H will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics 42LT770H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics 42LT770H.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics 42LT770H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics 42LT770H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
