
LCD TV OWNER’S MANUAL
PLASMA TV
LCD TV MODELS 19LS4D* 22LS4D* 32LG20** 37LG20** 42LG20** 19LG30** 22LG30** 26LG30**
PLASMA TV MODELS 42PG10** 50PG10** 42PG20** 50PG20** 42PG30** 50PG30** 60PG30**
32LG30** 32LG32** 37LG30** 42LG30** 42LG32** 32LG5*** 37LG50** 42LG50** 47LG50** 52LG50**

Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
ID Number(s): 5499: 22LS4D-ZD 5507: 19LS4D-ZD 5107: 42PG1000-ZA 5106: 50PG1000-ZA 5568: 42PG2000-ZA 5569: 50PG2000-ZA 5109: 42PG3000-ZA 5108: 50PG3000-ZA 5498: 60PG3000-ZA 5629: 32LG2000-ZA 5630: 37LG2000-ZA 5631: 42LG2000-ZA 5088: 19LG3000-ZA 5090: 22LG3000-ZA 5080: 26LG3000-ZA 5089: 32LG3000-ZA 5087: 37LG3000-ZA 5086: 42LG3000-ZA 5085: 32LG5000-ZA 5084: 37LG5000-ZA 5083: 42LG5000-ZA 5082: 47LG5000-ZA 5081: 52LG5000-ZA 5385: 52LG5010-ZD 5386: 47LG5010-ZD 5387: 42LG5010-ZD 5388: 37LG5010-ZD 5389: 32LG5010-ZD 5390: 52LG5020-ZB 5391: 47LG5020-ZB 5392: 42LG5020-ZB 5393: 37LG5020-ZB 5394: 32LG5020-ZB 5395: 52LG5030-ZE 5396: 47LG5030-ZE 5397: 42LG5030-ZE 5398: 37LG5030-ZE 5399: 32LG5030-ZE 5671: 32LG5700-ZF 5721: 26LG3050-ZA 5820: 19LG3050-ZA 5818: 22LG3050-ZA 5879: 19LG3060-ZB 5880: 22LG3060-ZB 5878: 32LG5600-ZB 6507: 32LG3200-ZA 6511: 42LG3200-ZA
This product qualifies for ENERGY STAR in the “factory default (Home mode)” setting and this is the setting in which power savings will be achieved. Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to qualify for Energy Star rating. (Plasma TV only)



Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

Polishing Cloth Polishing cloth for use on the screen.
Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.
Do not use excessive force. This may cause scratching or discolouration.
Cable Holder (42PG10**, 42PG20**, 42PG30**: 1EA, 50PG10**, 50PG20**, 50/60PG30**: 2EA)
(Refer to p.11) (Only 42PG10**, 42PG20**,
1-screw for stand fixing (Refer to p.5) (Only 32/37/42LG20**,
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is.
Install the power plug closely.


FRONT PANEL CONTROLS



P
PROGRAMME





INPUT
POWER Remote Control Sensor
Intelligent Sensor Adjusts picture according to the surrounding conditions. (32/37/42/47/52LG5*** only)
the OPTION menu.
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.








1-Screw (provided as parts of the product)
G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
+ · Stand · Desk

LCD TV Models : 19/22LG30**
PREPARATION
INPUT MENU P - + OK





















Remote Control Sensor · Remote Control Sensor

A Image shown may differ from your TV.

Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.
Component Input Connect a component video/audio device to these jacks.
RGB/DVI Audio Input Connect the audio from a PC or DTV.
Antenna Input Connect RF antenna to this jack.
OPTICAL DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.)
Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks.
Audio/Video Input (Except for 42/50PG10**) Connect audio/video output from an external device to these jacks. S-Video Input (Except for 42/50PG10**) Connect S-Video out from an S-VIDEO device.
HDMI Input Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
RGB Input Connect the output from a PC.


L/MONO R AUDIO AUDIO HDMI IN 3 HDMI IN 3 PCMCIA CARD SLOT PCMCIA CARD SLOT VIDEO VIDEO
Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
Component Input Connect a component video/audio device to these jacks.
Antenna Input Connect RF antenna to this jack.
RGB/DVI Audio Input Connect the audio from a PC or DTV.
PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.)
DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
Audio/Video Input Connect audio/video output from an external device to these jacks. S-Video Input (Except for 32/37/42LG20**, 32/42LG32**) Connect S-Video out from an S-VIDEO device.
Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks.
HDMI Input Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
Headphone Socket (Except for 32/37/42LG20**, 32/42LG32**) Connect the headphone plug to this socket.
RGB Input Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.


Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks.
RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.
HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.
Component Input Connect a component video/audio device to these jacks.
RGB/DVI Audio Input Connect the audio from a PC or DTV.
RGB Input Connect the output from a PC.
Antenna Input Connect RF antenna to this jack.
PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.)

STAND INSTALLATION (LCD TV Models: 32/37/42LG20**, 26/32/37/42LG30**, 32/42LG32**, 32/37/42LG5***)
A When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the
product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.



Fix the 4 bolts securely using the holes in the back of the TV.
2 Assemble the parts of the Stand Body with the Cover Base of the TV.

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Assemble the parts of the STAND BODY with COVER BASE of the TV. Insert the STAND BODY into a COVER BASE until clicking sound.
Stand Body · Cover Base


Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Fix the 4 bolts securely using the holes in the back of the TV.

STAND INSTALLATION (Only 19/22LS4D*)
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Insert the Stand Body into the TV until clicking sound.

Assemble the parts of the Stand Body with the Cover Base of the TV.
Hold the Hinge Body and bend it upward.


Swivel Stand (Except for 19/22LS4D*, 50PG10**)

After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position.


4 Hold the Stand Body and bend it upward.
Place the tv with its front facing downward on a cushion or soft cloth.
5 Pull stand body to separate from the TV during pressing 2 latches.
Pull the Cover Base backward during pressing a button on the Stand Body.
Hold the Cover Base and pull with shake it backward to separate from the Stand Body.

PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER.
possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen these bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

3 Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV.

G When moving the TV undo the cords first.
G Use a platform or cabinet strong and large enough to support the size and weight of the TV.
G To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

PLASMA TV Models
To connect additional equipment, see the External Equipment Setup section. 1
Connect the cables as necessary.

Install the CABLE MANAGEMENT CLIP as shown. If your TV has the CABLE HOLDER, install it as shown and bundle the cables. 2
Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward. * For the 42PG10** model, press the center of the CABLE MANAGEMENT CLIP and then lift up it.


Connect the cables as neces- sary. To connect additional equip- ment, see the External Equipment Setup section of the manual.
To connect additional equipment, see the External Equipment Setup section.
How to remove the cable management clip (LCD TV Models : 19/22LS4D*)
First, press the cable management. Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.
G Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.

To connect additional equipment, see the External Equipment Setup section of the manual. 1
Connect the cables as necessary.

G Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward.
G Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.

POSITIONING YOUR DISPLAY (Only 19/22LG30**, 19/22LS4D*)

maximum comfort.
LOCATION (Only 19/22LG30**, 19/22LS4D*)
Position your TV so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the tv to any unnecessary vibration, moisture, dust or heat. Also ensure that the TV is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the back of the TV. When you install the TV to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact http://www.kensington.com the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors.









when when it is turned on. This is normal, there is nothing wrong with TV. b. Some minute dot defects may be visible on the screen, appear-
ing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. c. Avoid touching the LCD screen or holding your finger(s)


against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.



For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall.
When installing the wall-mounted unit, use the protection cover for desk-type stand installation. Insert the PROTECTION COVER into the TV until clicking sound.
Power Supply · Circuit breaker


Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

antenna as shown above.

Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.


Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the TV.
Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the TV.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select Component input source using the INPUT button on the remote control.


Connect the HDMI output of the digital set-top box to the HDMI/DVI IN, HDMI/DVI IN 1, HDMI IN 2 or HDMI IN 3 jack on the TV.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select HDMI/DVI, HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control.

Connecting with a HDMI to DVI cable


Connect the digital set-top box to HDMI/DVI IN, HDMI/DVI IN 1(DVI) or HDMI/DVI IN 1 jack on the TV.
Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select HDMI/DVI or HDMI 1 input source using the INPUT button on the remote control.
- Sending the TV’s audio signal to external audio equipment via
the Digital Audio Output (Optical) port.

Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment.
Set the “ TV Speaker option - Off ” in the AUDIO menu. (G p.80) Refer to the external audio equipment instruction manual for operation.
GDo not look into the optical output port. Looking at the

When connecting with a component cable


Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV.
Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV.
Select Component input source using the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.
Component Input ports To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Connecting with a Euro Scart cable


Connect the Euro scart socket of the DVD to the AV1 Euro scart socket on the TV.
Select AV1 input source using the INPUT button on the remote control. If connected to AV2 Euro scart socket, select AV2 input source.
Refer to the DVD player's manual for operating instructions.
G Any Euro scart cable used must be signal shielded.

Connecting with a S-Video cable (Except for 19/22LS4D*, 32/37/42LG20**, 32/42LG32**, 42/50PG10**)

L/MONO R AUDIO AUDIO HDMI IN 3 HDMI IN 3 PCMCIA CARD SLOT PCMCIA CARD SLOT VIDEO VIDEO
Connect the S-VIDEO output of the DVD to the S-VIDEO input on the TV.
Connect the audio outputs of the DVD to the AUDIO input jacks on the TV.

Select AV3 input source using the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.
Connect the HDMI output of the DVD to the HDMI/DVI IN, HDMI/DVI IN 1, HDMI IN 2 or HDMI IN 3 jack on the TV.

Select HDMI/DVI, HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.

GThe TV can receive video and audio signals simultaneously
GIf the DVD does not support Auto HDMI, you must set the

visible.
R S-VIDEO VIDEO ANT OUT L ANTENNA IN
OUTPUT SWITCH ANT IN
Wall Jack
Antenna
Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.
Connect the antenna cable to the ANT IN socket of the VCR.
Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.

Connecting with a Euro Scart cable


Connect the Euro scart socket of the VCR to the AV1 Euro scart socket on the TV.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
Select AV1 input source using the INPUT button on the remote control.
If connected to AV2 Euro scart socket, select AV2 input source.
G Any Euro scart cable used must be signal shielded.

L/MONO R AUDIO AUDIO HDMI IN 3 HDMI IN 3 PCMCIA CARD SLOT PCMCIA CARD SLOT VIDEO VIDEO
Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
Select AV3 input source using the INPUT button on the remote control.
G If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO jack of the TV.


Connect the S-VIDEO output of the VCR to the S - VIDEO input on the TV. The picture quality is improved; compared to normal composite (RCA cable) input.
L/MONO R AUDIO AUDIO HDMI IN 3 HDMI IN 3 PCMCIA CARD SLOT PCMCIA CARD SLOT VIDEO VIDEO
Connect the audio outputs of the VCR to the AUDIO input jacks on the TV.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
Select AV3 input source using the INPUT button on the remote control.
G If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be received.

Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red)
L/MONO R AUDIO AUDIO HDMI IN 3 HDMI IN 3 PCMCIA CARD SLOT PCMCIA CARD SLOT VIDEO VIDEO
Select AV3 input source using the INPUT button on the remote control.
Operate the corresponding external equipment. Refer to external equipment operating guide.

INSERTION OF CI MODULE
- To view the encrypted (pay) services in digital TV

mode. - This feature is not available in all countries.

Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of TV as shown.
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.


Connect the RGB output of the PC to the RGB IN (PC) jack on the TV.
Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
Select RGB input source using the INPUT button on the remote control.


Connect the DVI output of the PC to the HDMI/DVI IN, HDMI/DVI IN 1(DVI) or HDMI/DVI IN 1 jack on the TV.
Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.

Select HDMI/DVI or HDMI 1 input source using the INPUT button on the remote control.
G To enjoy vivid picture and sound, connect a PC to
G Connect the audio cable from the PC to the Audio
the TV.
input on the TV. (Audio cables are not included with the TV).
G Avoid keeping a fixed image on the TV’s screen for
prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
G If using a sound card, adjust PC sound as required.
G If the graphic card on the PC does not output
analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV.
G Connect the PC to the RGB (PC) or HDMI IN (or
HDMI/DVI IN) port of the TV; change the resolution.
G If the graphic card on the PC does output
G There may be interference relating to resolution,
analogue and digital RGB simultaneously, switch the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.)
vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
G DOS mode may not work depending on the video
card if you use a HDMI to DVI cable.
G If you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.
G The synchronization input waveform for Horizontal and Vertical frequencies are separate.
G Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.

Supported Display Resolution (Only 19/22LS4D*)
RGB[PC], HDMI[PC] mode HDMI[DTV] mode
31.468 31.469 37.684 37.879 46.875 49.725 48.363 56.470 60.123 47.78 47.72 47.56 63.595 55.5 64.744 65.16
70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.029 59.87 59.8 59.6 60.0 59.90 59.948 59.94
31.469 31.5 31.25 37.500 44.96 45 33.72 33.75 28.125 26.97 27 33.716 33.75 56.250 67.43 67.5
59.94 60 50 50 59.94 60 59.94 60 50.00 23.97 24 29.976 30.00 50 59.94 60
1280x768 1360x768 1366x768 1280x1024 1440x900 1400x1050 1680x1050

31.468 31.469 37.684 37.879 46.875 49.725 48.363 56.470 60.123 47.78 47.72 47.56 55.5 64.744 65.16 63.595 66.647
70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.029 59.87 59.8 59.6 59.90 59.948 59.94 60.0 59.988
31.469 / 31.5 31.25 37.500 44.96 / 45 33.72 / 33.75 28.125 26.97 / 27 33.716 / 33.75 56.250 67.43 / 67.5
59.94 / 60 50 50 59.94 / 60 59.94 / 60 50.00 23.97 / 24 26.976 / 30.00 50 59.94 / 60
1280x768 1360x768 1366x768 1440x900 1400x1050 1680x1050 1280x1024 1920x1080
31.468 31.469 37.879 48.363 47.78 47.72 66.647
70.08 59.94 60.31 60.00 59.87 59.80 59.988
31.469 31.469 31.47 31.50 31.25 37.50 44.96 45.00 28.125 33.72 33.75 27.000 33.75 56.25 67.433 67.50
59.94 60.00 59.94 60.00 50.00 50.00 59.94 60.00 50.00 59.94 60.00 24.00 30 50.00 59.94 60


Returns to the default settings Position, Size and Phase at the factory.
This function works in the following mode : RGB[PC].


If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.
This function works in the following mode : RGB[PC].


To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC] mode.
1024 x 768 1280 x 768 1360 x 768 1366 x 768

Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
Prev. RETURN
Auto Config. G
Select PICTURE.
2 Select SCREEN.
3 Select Auto Config..
5 Run Auto Config. . OK

REMOTE CONTROL KEY FUNCTIONS (Only 19/22LS4D*)
When using the remote control, aim it at the remote control sensor on the TV.
Switches the TV on from standby or off to standby.
POWER
D/A INPUT
Selects digital or analogue mode. Switches the TV on from standby.
I/II MUTE TEXT
INPUT
External input mode rotate in regular sequence. Switches the TV on from standby.
TV/RADIO
Selects Radio or TV channel in digital mode.
Selects the sound output.
Switches the sound on or off.
MENU AV MODE
0~9 number button
Selects a programme. Selects numbered items in a menu.
Displays the programme table.
Returns to the previously viewed programme.
Selects a menu.
RETURN
AV MODE
It helps you select and set images and sounds when con- necting AV devices.
FAV
Shows the present screen information.
Shows programme schedule.
SLEEP
SUBTITLE UPDATE
THUMBSTICK
Allows you to navigate the on-screen menus and adjust the system settings to your preference.
TIME
HOLD REVEAL
Accepts your selection or displays the current mode.
Adjusts the volume.
RETURN(EXIT)
Allows the user to move back one step in an interactive application, EPG or other user interaction function.
Displays the selected favourite programme.
Selects a programme.


These buttons are used for teletext. For further details, see the ‘Teletext’ section.
These buttons are used for teletext (on TELETEXT models only) or Programme edit.


Switches the TV on from standby or off to standby.
External input mode rotate in regular sequence. Switches the TV on from standby.
These buttons are used for teletext. For further details, see the ‘Teletext’ section.
It helps you select and set images and sounds when connecting AV devices.
Selects a programme. Selects numbered items in a menu.
Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.
Allows you to navigate the on-screen menus and adjust the system settings to your preference.
Allows the user to move back one step in an interactive application, EPG or other user interaction function.
(Only 42/50PG10**)


These buttons are used for teletext (on TELETEXT mod- els only) or Programme edit.

RATIO
MODE
Selects the remote operating modes.
Switches the TV on from standby or off to standby.
External input mode rotate in regular sequence. Switches the TV on from standby.
Selects Radio, TV, DTV channel.
RATIO
Selects your desired picture format.
Select the desired quick menu source.
Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.
Shows programme schedule.
Allows you to navigate the on-screen menus and adjust the system settings to your preference.
Accepts your selection or displays the current mode.
Allows the user to move back one step in an interactive application, EPG or other user interaction function.
Shows the present screen information.
It helps you select and set images and sounds when connecting AV devices.
These buttons are used for teletext (on TELETEXT models only) , Programme edit.
These buttons are used for teletext. For further details, see the ‘Teletext’ section.
Recalls your preferred subtitle in digital mode.
See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.


Move from one full set of screen information to the next one.
Selects a programme. Selects numbered items in a menu.

TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode.
In standby mode to turn TV on, press the r / I, INPUT or P (or PR D E) button on the TV or press the POWER, INPUT, D/A, P (or (PR + - or P + -)) or NUMBER button on the remote control and the TV will switch on.
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Select Mode, Country, Time Zone, Auto programme tuning.
work, depending on the DTV broadcasting environment. d. "Home” mode is the optimal setting for home environments, and is the TV's default mode. e. "In Store" mode is the optimal setting for store environments.“ If a user modifies image quality data,
“In Store” mode initializes the product to the image quality set by us after a certain period of time. f. The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.
Press the P (or (PR + - or P + -)) or NUMBER buttons to select a programme number. 1
Press the VOL + - (or + -) button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE, VOL + - (or + -), or I/II button.
Initializing setup


Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.


Use this to automatically find and store all available programmes.
When you start auto programming in digital mode, all previously stored service information will be deleted.


Manual Tuning lets you manually add a programme to your programme list. MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Your receiver will add this channel to your channel list.

Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
F TV G
6 Select V/UHF or Cable.
Select SETUP.
2 Select Manual Tuning.
8 Commence searching.
3 Select TV.
4 Select the desired pro- gramme number on. 5 Select a TV system.

You can assign a station name with five characters to each programme number.
5 Select the position and make your choice of the second char- acter, and so on. You can use an the alphabet A to Z, the number 0 to 9, +/ -, and blank. 6 Select Close.
Select SETUP.
2 Select Manual Tuning.
3 Select TV.
7 Select Store.
4 Select Name.
Normally fine tuning is only necessary if reception is poor.
4 Select Fine.
Select SETUP.
2 Select Manual Tuning.
5 Fine tune for the best picture and sound.
3 Select TV.
6 Select Store.

PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P (or PR + / -) but- ton during TV viewing.
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu
This function enables you to skip the stored programmes.
In some countries it is possible to move a programme number by using the YELLOW button only.
Select SETUP.
2 Select Programme Edit.
3 Enter the Programme Edit.
4 Select a programme to be stored or skipped.

1 • When a programme number is skipped it means that you will be unable to select it using the P
Select a programme number to be skipped.
2 BLUE BLUE Turn the skipped programme number to blue.
(or PR + / -) button during normal TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
3 BLUE BLUE Release the skipped programme.
Select your favourite pro- gramme number. 1 • It will automatically include the selected programme into your favourite programme list. FAV

IN TV MODE
This function enables you to delete or skip the stored programmes. You can also move some channels to other programme numbers.
Start Auto Sort. 1 GREEN GREEN • After activating Auto Sort once, you can no longer edit programmes.
A Deleting a programme
Select a programme number to be deleted.
2 RED RED Turn the deleted programme number to red.
3 RED RED Release the deleted programme.
Select a programme number to be moved.
Turn the moved programme number to YELLOW.
3 YELL YELLOW Release the moved programme.
Select a programme number to be skipped.
(or PR + / -) button during normal TV viewing. • If you wish to select a skipped programme, directly enter the programme number with the NUMBER but- tons or select it in the programme edit or EPG.
2 BLUE BLUE Turn the skipped programme number to blue.
3 BLUE BLUE Release the skipped programme.
Select your favourite programme number.


If reception is poor, selectBooster to On. When the signal is strong, select “Off”.

Software Update means software can be downloaded through the digital terrestrial broadcasting system. SOFTWARE UPDATE
3 Select On or Off. • If you select On, a user confirm message box will be displayed to notify that new software is found. 4 Save.
Select SETUP.
2 Select Software Update.
Occasionally, a transmission of updated digital software informa- tion will result in the following menu on the TV screen.
Select the YES using the button and you will see the fol- lowing picture.
After the Software Update is complete, the System restarts.

When the Software Update menu is "Off", the message to change it to "On" appears.
When the power is turned off, downloading starts. When the power is turned on while updat- ing, the progress status is displayed.


This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version.
This displays the information and signal strength of the tuned MUX. This displays the signal information and service name of the selected MUX.
3 Display Manufacturer, Model/Type, Serial Number and Software Version.

CI [COMMON INTERFACE] INFORMATION
This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output.
This may be incompatible with the CI module and smart card.
CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances.
CI Information CI Information
Select SETUP.
2 Select CI Information.
3 Select the desired item: Module information, smart card information, language, or software download etc.
4 Save.

You can check which programmes are stored in the memory by displaying the programme table. SELECTING THE PROGRAMME TABLE
Displayed when the Locked Programme.
A Displaying programme LIST
display the PROGRAMME LIST.
1 Select a programme.
From the programme you are currently watching, the mode will change from TV to DTV to Radio.
2 Switch to the chosen programme number.
1 Turns the pages. or 2 Return to normal TV viewing.
LIST
A Displaying the favourite programme table
1 Display the Favourite Programme table.
or TV/RAD

(Except for 19/22LS4D*, 42/50PG10**)
This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo.
This TV might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
If you do not want SIMPLINK menu, select “Off”.
SIMPLINK function is not supported by HDMI IN 3 input.
Hard of Hearing( ) Off
Hard of Hearing( ) Off
Country :UK
Country :UK
E
Select OPTION.
Select SIMPLINK.
3 Select On or Off.
4 Save.
G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the
SIMPLINK device with the HDMI cable.
G After connecting the HDMI terminal for the home theatre with the SIMPLINK function using the above
method, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN ter- minal on the back of the SIMPLINK device with the OPTICAL cable.
G When operating an external device with SIMPLINK, press the TV button from the MODE buttons on the
remote control.
G When you switch the Input source using the INPUT button on the remote control, you can stop the opera-
tion of a device controlled by SIMPLINK
G When you select or operate a media device with home theater function, the speaker automatically switches
to home theater speaker (HT speaker).

Disc playback Control connected AV devices by pressing the , OK, G, A, l l, FF and GG buttons.(The Ô button does not provide such functions.)
Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices When you switch off the TV, all connected devices are turned off.
Switch audio-out Offers an easy way to switch audio-out.
Sync Power on The TV will change automatically to turn on mode, after the Player with Simplink function start to reproduce through connection HDMI.
* A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function.
Press the button and then OK button to select the desired SIMPLINK source.

TV viewing : Switch to the previous TV programme regardless of the current mode.
DISC playback : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen.
When no device is connect- ed (displayed in gray)
VCR playback : Play and control the connected VCR.
When a device is connected (displayed in bright colour)
HDD Recordings playback : Play and control recordings stored in HDD.
Audio Out to Home theater/Audio Out to TV: Select Home theater or TV speaker for Audio Out.
Selected Device



You can select the optimal images and sounds when connecting AV devices to external input.
Off Cinema
Game Sport
1 AV MODE
Select the desired source.

This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcasted by broadcasting companies.
The EPG displays the programme description for next 8 days.
Switch on/off EPG

14:00 15:00 1 YLE TV1 Kungskonsumente 2 YLE TV2 No Information No Information TV2: Farmen 4 TV.. No Information No Information No Information Tänään otsikoissa No Information
Select desired programme. 1
Display the selected programme. 2
No Information GUIDE · or · P or P

Change EPG mode. RED RED
Select the Broadcast Programme.
Enter Timer Record/Remind setting mode. YELL YELLOW
or P P P
Page Up/Down.
Enter Timer Record/Remind list mode. BLUE BLUE
Switch off EPG. or
Change to the selected programme. Select TV or RADIO Programme.
EPG (ELECTRONIC PROGRAMME GUIDE)
The detail information on or off. Select NOW or NEXT Programme.
Change EPG mode. RED RED
Select the Broadcast Programme.
Enter Date setting mode. GREEN GREEN
or P P P
Page Up/Down.
Enter Timer Record/Remind setting mode. YELL YELLOW
Switch off EPG. or GUIDE
Enter Timer Record/Remind list mode. BLUE BLUE
Select TV or RADIO Programme.
Change to the selected programme.
The detail information on or off.
Select NOW or NEXT Programme.
Switch off Date setting mode. GREEN GREEN
Switch off Date setting mode.
Switch off EPG. or GUIDE EXIT
Change to the selected date.
Select a date.

Button Function in Extended Description Box
The detail information on or off. INFO i
Text Up/Down.
Switch off EPG. or GUIDE EXIT
Enter Timer Record/Remind setting mode. YELL YELLOW
Button Function in Record/Remind Setting Mode
- This function is available only when recording equipment that use pin8 recording signalling has been connect-
ed to the DTV-OUT terminal, using a SCART cable. - Two hours after the TV is switched on by the Remind function it will automatically switch back to standby
mode unless a button has been pressed.
Select Type, Service, Date or Start/End time.
Save Timer Record/Remind.
Function setting.
Change to Guide mode. BLUE BLUE
Enter Schedule list editing mode. GREEN GREEN
Select Schedule list.
Delete the selected item. RED RED

PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan, Original, 4:3, 14:9 and Zoom1/2.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using button.
This function works in the following signal.
Q. MENU RATIO



or









G You can only select 16:9 (Wide), 4:3, 14:9, Zoom 1/2 in Component (under 720p) mode.
G You can only select 4:3, 16:9 (Wide) in RGB/HDMI[PC] mode only.
G In HDMI/Component (over 720p) mode, Just Scan is available.
G You can only select Original in UK digital teletext (MHEG-5).

Picture Mode-Preset
G It is possible to use Intelligent Sensor in 32/37/42/47/52LG5*** models only.
G In PLASMA TV models, Backlight will not be displayed.
E
Select PICTURE.
2 Select Picture Mode.
3 Select desired picture value.


Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue.
4 Select either Cool, Medium or Warm.


G It is possible to use Intelligent Sensor in 32/37/42/47/52LG5*** models only.
G In PLASMA TV models, Backlight will not be displayed.
4 Select Backlight (LCD TV Only), Contrast, Brightness, Sharpness, Clolour or Tint. 5 Make appropriate adjustments.
G You can not adjust colour, sharpness and tint in the RGB-PC mode.


By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users.

Fresh Contrast Optimizes the contrast automatically according to the brightness of the reflection.
Fresh Colour Adjusts the colour of the reflection automatically to reproduce as close as possible natural colours.
Noise Reduction Removes interference up to the point where it does not damage the original picture.
Gamma High gamma values display whitish images and low gamma values display high contrast images.
D
D
Fresh Contrast F High G
E
Select PICTURE.
2 Select Advanced Control.
3 Select Fresh Contrast, Fresh Colour, Noise Reduction or Gamma.
4 Select your desired Source.


To set the TV up for the best picture quality for viewing films.
This feature operates only in TV, AV and Component 480i/576i/1080i mode.


When you view a film this function adjusts the TV to best picture quality.
This function works in the following mode: AV (NTSC-M), HDMI or Component.


It helps you adjust brightness when the screen is too bright to prevent dazzling.


Settings of the selected picture modes return to the default factory settings.

IMAGE STICKING MINIMIZATION (ISM) METHOD (PLASMA TV ONLY)
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods.
White wash White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Inversion This function inverts the panel colour of the screen. The panel colour is automatically inverted every 30 minutes.
D
D
Select OPTION.
Select ISM Method.
3 Select Normal, Orbiter, Inversion or White wash. 4 Save.


This function allows you to reduce the power consumption of the TV.
3 Select Level 0, Level 1, Level 2, Level 3 or Level 4. 4 Save.
G The default factory setting complies with the Energy star requirements and is adjusted to the com-
fortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Power Saving Level or by setting the Picture Mode.

G In 19/22LS4D* Models, TV Speaker will not be displayed.

AVL automatically remains on the same level of volume if you change programmes.

You can select your preferred sound setting; SRS TruSurround XT or (SRS TruSurround HD (32/37/42/47/52LG5010 Only)), Clear Voice, Standard, Music, Cinema, Sport or Game and you can also adjust the frequency of the equalizer.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
SRS TruSurround XT or (SRS TruSurround HD (32/37/42/47/52LG5010 Only)), Clear Voice, Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
L R
E
Select AUDIO.
2 Select Sound Mode.
3 Select SRS TruSurround XT or (SRS TruSurround HD (32/37/42/47/52LG5010 Only)), Clear Voice, Standard, Music, Cinema, Sport or Game.
G and are a trademark of SRS Labs, Inc.
G TruSurround XT and TruSurround HD technology is incorporated under license from SRS Labs, Inc.


3 Select SRS TruSurround XT or (SRS TruSurround HD (32/37/42/47/52LG5010 Only)), Clear Voice, Standard, Music, Cinema, Sport or Game.


You can adjust the sound balance of the speakers to preferred levels. BALANCE


In AV, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV internal speakers.

This function allows you to select your preferred Digital Audio Output. The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio. When Dolby digital is available, selecting Dolby Digital in the Digital Audio Out menu will set SPDIF output to Dolby Digital If Dolby Digital is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM. Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio, only Dolby Digital will be played.
D
Select AUDIO.
Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trade- marks of Dolby Laboratories.
Select Digital Audio Out.
3 Select Dolby Digital or PCM.


Settings of the selected Sound Mode return to the default factory settings.

Stereo/Dual Reception (In Analogue Mode Only)
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Select AUDIO.
Select the sound output. I/II
2 Select the sound output.
MONO
STEREO
DUAL I, DUAL II, DUAL I+II
A Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
A Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II.
DUAL I Sends the primary broadcast language to the loudspeakers. DUAL II Sends the secondary broadcast language to the loudspeakers. DUAL I+II Sends a separate language to each loudspeaker.

NICAM Reception (In Analogue Mode Only)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
When NICAM mono is received, you can select NICAM MONO or FM MONO.
When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono.
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or FM MONO.
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from
audio R input is sent to the right loudspeaker. L+L: Audio signal from audio L input is sent to left and right loudspeakers. R+R: Audio signal from audio R input is sent to left and right loudspeakers.

The installation guide menu appears on the TV screen when it is switched on for the first time.
Select your desired language.
2 Select your country.
* If you want to change Language/ Country selection
Select OPTION.
2 Select Menu Language or Country.
3 Select your desired language or country.
4 Save.
G If you do not finish the set-up Installation Guide by pressing RETURN or if you time out on the OSD (On
Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on
G If you select the wrong local country, teletext may not appear correctly on the screen and some problems
may occur during teletext operation.
G The CI (Common Interface) function may not be applied based on country broadcasting circumstances.
G DTV mode control buttons may not function based on country broadcasting circumstances.
G In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending
on digital broadcasting circumstances.
G The Country Setting “UK” should only be activated UK.

LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language are not support- ed, you can select language in secondary category.
Select OPTION.
Select OPTION.
2 Select Audio Language, Subtitle Language.
2 Select Hard of Hearing( ).
3 Select your desired language.
3 Select On or Off.
4 Save.
< Audio Language Selection >
Audio Language OSD Information
G When two or more audio languages are broadcast, you can
Status Not Available MPEG Audio Dolby Digital Audio Audio for “Visual Impaired” Audio for “Hearing Impaired”
select the audio language.
< Subtitle Language Selection >
Subtitle Language OSD Information
G When two or more subtitle languages are broadcast, you
Status Not Available Teletext Subtitle
can select the subtitle language with the SUBTITLE button on the remote control.
G Press the button to select a subtitle language.
Subtitle for “Hard of Hearing”
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider. - When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of the Main audio.
Display · Display


The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.)
You must set the time correctly before using on/off timer function.
3 Select either the year, date, or time option.

AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed.
The Off time function overrides the On timer function if both are set to the same time. The TV must be in standby mode for the On timer to work.
1/Mar. 2007 16:09
Select TIME.
2 Select Off time or On time.
2 Select TV, DTV or Radio.
3 Select Repeat.
3 Set the programme.
4 Select Off, Once, Daily, Mon ~ Fri, Mon ~ Sat, Sat ~ Sun or Sun.
4 Adjust volume level at switch-on.
5 Set the hour.
6 Set the minutes.


If the TV is switched on and there is no input signal, it will switch off automatically after 10 minutes. AUTO SHUT-OFF SETTING

TIME ZONE SETUP
When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
Select TIME.
2 Select Time Zone.
3 Select your viewing area time zone.
4 Confirm it.
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed.
Select Sleep Timer.
Select Off, 10, 20, 30, 60, 90, 120, 180 or 240 Min..
Select the number of minutes.


Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
1 • If you forget your password, press ‘7’, ‘7’, ‘7’, ‘7’ on the remote control handset.
5 Input a 4-digit password. Be sure to remember this number! Re-enter new password for confirm.


Blocks any programmes that you do not want to watch or that you do not want your children to watch.
It is available to use this function in Lock System “On”.


This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate.
A password is required to gain access to this menu.
This TV is programmed to remember which option it was last set to even if you switch the TV off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.

KEY LOCK
The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing.
Hard of Hearing( ) Off
Hard of Hearing( ) Off
Country :UK
Country :UK
Select OPTION.
2 Select Key Lock.
3 Select On or Off.
4 Save.

This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
Press the TEXT button to switch to teletext. The initial page or last page viewed appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT button to switch off teletext. The previous mode reappears.
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The P (or (PR + - or P + -)) button can be used to select the preceding or following page.
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block.
A Block / group / page selection
With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the P (or PR +) button can be used. The red button returns to the previous selection. Alternatively the P (or PR -) button can be used.
A Direct page selection
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode.
A Page selection

FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
Press the T.OPT button and then use button to select menu. Display the index page.
(In 19/22LS4D*, press the button to select the index menu.) You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The P (or (PR + - or P + -)) button can be used to select the preceding or following page.
TELETEXT
Select this menu to display concealed information, such as solutions to riddles or puzzles.
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Select this menu again to view the updated teletext page.
When viewing a TV programme, Select this menu to display the time at the top right hand corner of the screen. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bot- tom of the screen. To hold or change the sub page, press the RED/GREEN, or NUMBER buttons.
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The num- ber of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this menu is selected the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive.
A Page selection · ?

*This function works in UK only.
The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.
You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.
Press the numeric or P (or (PR + - or P + -)) button to select a digital service which broadcasts digital teletext. To know which are digital teletext services, refer to the EPG service list.

Follow the indications on digital teletext and move onto the next step by pressing TEXT, OK, , RED, GREEN, YELLOW, BLUE or NUMBER buttons and etc..
To change digital teletext service, select a different service by the numeric or P (or (PR + - or P + -)) button.
TELETEXT IN DIGITAL SERVICE
Press the numeric or P (or (PR + - or P + -)) but- ton to select a certain service which broadcasts digital teletext.

Press the TEXT or coloured button to switch on teletext.
Follow the indications on digital teletext and move onto the next step by pressing OK, , RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on.
Press the TEXT or colour button to switch off digital teletext and return to TV viewing.
Some services may allow you to access text services by pressing the RED button.


This function operates in current mode. To initialize the adjusted value.
When the Lock System menu is “On”, the message to enter the password appears.

The TV does not operate properly.
A Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Ensure that the correct remote operating mode is set: TV, VCR etc.
A Install new batteries.
A Is the sleep timer set?
A Check the power control settings. Has the Power supply been interrupted.
A Is Auto sleep activated on this station?
The video function does not work.
A Check whether the TV is switched on.
A Try another channel. The problem may be with the broadcast.
A Is the power cord inserted correctly into the mains?
No picture &No sound
A Check your antenna direction and/or location.
A Test the mains outlet by plugging another TV into the same outlet.
A This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
A Adjust Colour in menu option.
No or poor colour
A Allow a sufficient distance between the TV and the VCR.
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A Check for local interference such as an electrical appliance or power tool.
A Station or cable channel experiencing problems, tune to another station.
A Station signal is weak, reposition the antenna to receive weaker stations.
A Check for sources of possible interference.
A Check antenna (Change the position of the antenna).
A Check HDMI cable over version 1.3.
No picture when connecting HDMI
If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.

The audio function does not work.
A Press the VOLUME button.
A Sound muted? Press MUTE button.
Picture OK & No sound
A Try another channel. The problem may be with the broadcast.
A Are the audio cables installed properly?
No output from one
A Adjust Balance in menu option.
A A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
No sound when connecting HDMI or
A Check HDMI cable over version 1.3.
A Check USB cable over version 2.0.
*This feature is not available for all models.
There is a problem in PC mode. (Only PC mode applied)
A Adjust resolution, horizontal frequency or vertical frequency.
The signal is out of range
A Check the input source.
Vertical bar or stripe on
background & Horizontal Noise &
A Use Auto configure or adjust clock, phase or H/V position. (Option)
Screen colour is unstable
A Check the signal cable.
A Reinstall the PC video card.
There is a problem with PICTURE settings.
When the user changes the picture settings, the TV automatically converts back to the initial settings
A It means that the TV is currently set to In Store mode.
To switch to Home mode you should do the followings: From the TV Menu, choose OPTION -> Factory Reset -> Yes (wait for a few seconds for the TV to download again) -> OSD "WELCOME" appears -> Press OK button -> Choose Language -> Choose Home -> Select your Country and Time Zone -> Press OK button. Program search will begin automatically (You can stop the search by pressing the OK button). Now, you have completed switching to the Home mode.
after a certain period of
time.

Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen.
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
ATo remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
ADo not to use a wet cloth.
CAUTION
G If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.

PRODUCT SPECIFICATIONS
50PG10**
42PG30**
MODELS
42PG1000-ZA
50PG1000-ZA
42PG3000-ZA
1040.0 x 729.0 x 308.0 mm 41.0 x 28.7 x 12.2 inches
1224.7 x 849.0 x 364.0 mm 48.3 x 33.5 x 14.4 inches
1039.5 x 726.0 x 307.6 mm 41.0 x 28.6 x 12.1 inches
Dimensions (Width x Height x Depth)
1040.0 x 677.0 x 84.0 mm 41.0 x 26.7 x 3.3 inches
1224.7 x 790.0 x 83.6 mm 48.3 x 31.1 x 3.3 inches
1039.5 x 673.7 x 84.0 mm 41.0 x 26.6 x 3.3 inches
26.6 kg / 58.7 lbs 24.6 kg / 54.3 lbs
41.5 kg / 91.5 lbs 38.1 kg / 84.0 lbs
28.0 kg / 61.8 lbs 25.0 kg / 55.1 lbs
AC100-240V~ 50/60Hz 3.1A
AC100-240V~ 50/60Hz 4.2A
AC100-240V~ 50/60Hz 3.1A
Power requirement Power Consumption
420W
310W
50PG30**
42PG20**
50PG20**
MODELS
42PG2000-ZA
50PG2000-ZA
50PG3000-ZA
1232.0 x 850.0 x 363.6 mm 48.5 x 33.5 x 14.4 inches
1040 x 731.3 x 308 mm 40.9x 28.7 x 12.1 inches
1224.7 x 849 x 364 mm 48.2 x 33.4x 14.3inches
Dimensions (Width x Height x Depth)
1232.0 x 793.0 x 84.0 mm 48.5 x 31.2 x 3.3 inches
1040 x 677 x 86 mm 40.9 x 26.6 x 3.4 inches
1224.7 x 790 x 86 mm 48.2x 31.1 x 3.4 inches
42.3 kg / 93.3 lbs 38.3 kg / 84.5 lbs
27.3 kg / 60.1 lbs 24.4 kg / 53.8 lbs
41.8 kg / 92.2 lbs 37.8kg / 83.3lbs
Power requirement Power Consumption
AC100-240V~ 50/60Hz 4.2A
AC100-240V~ 50/60Hz 3.1A
AC100-240V~ 50/60Hz 4.2A
420W
310W
420W
60PG30**
19LS4D*
22LS4D*
MODELS
60PG3000-ZA
19LS4D-ZD
22LS4D-ZD
1468 x 1009.1 x 413.9 mm 57.8 x 39.7 x 16.3 inches
456.8x 396.6x 172.0 mm 18.0 x 15.6 x 6.8 inches
525.4 x 441.7x 187.4 mm 20.7 x 17.4 x 7.3 inches
Dimensions (Width x Height x Depth)
1468 x 949.5 x 88.5 mm 57.8 x 37.4 x 3.5 inches
456.8 x 368.5 x 70.5 mm 18.0 x 14.5 x 2.8 inches
525.4 x 413x 68.6 mm 20.7 x 16.3 x 2.7 inches
80.6 kg / 177.7 lbs 72.6 kg / 160.1 lbs
5.1 kg / 11.3 lbs 4.6 kg / 10.2 lbs
6.1 kg / 13.5 lbs 5.7 kg / 12.6 lbs
Power requirement Power Consumption
AC100-240V~ 50/60Hz 5.6A
AC100-240V~ 50/60Hz 0.8A
AC100-240V~ 50/60Hz 1.0A
50W
60W
Television System Programme Coverage External Antenna Impedance
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’ VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
Operating Temperature Operating Humidity
0 ~ 40°C / 32 ~ 104°F Less than 80%
Storage Temperature Storage Humidity

22LG30**
26LG30**
MODELS
19LG3000-ZA 19LG3050-ZA 19LG3060-ZB
22LG3000-ZA 22LG3050-ZA 22LG3060-ZB
26LG3000-ZA 26LG3050-ZA
458.8 x 391.0 x 189.2 mm 18.1 x 15.4 x 7.5 inches
522.2 x 431.5 x 189.0 mm 20.6 x 17.0 x 7.5 inches
663.3 x 508.2 x 227.3 mm 26.1 x 20.1 x 9.0 inches
Dimensions (Width x Height x Depth)
458.8 x 344.5 x 69.0 mm 18.1 x 13.6 x 2.7 inches
522.2 x 384.2 x 69.0 mm 20.6 x 15.2 x 2.7 inches
663.3 x 449.8 x 80.0 mm 26.1 x 17.8 x 3.2 inches
5.02 kg / 11.1 lbs 4.76 kg / 10.5 lbs
5.6 kg / 12.4 lbs 5.34 kg / 11.8 lbs
10.1 kg / 22.3 lbs 8.6 kg / 19.0 lbs
AC100-240V~ 50/60Hz 0.8A
AC100-240V~ 50/60Hz 0.9A
AC100-240V~ 50/60Hz 1.2A
Power requirement Power Consumption
55W
120W
32LG30**
37LG30**
42LG30**
32LG20**
MODELS
37LG3000-ZA 37LG3030-ZA
42LG3000-ZA 42LG3030-ZA
32LG3000-ZA 32LG3030-ZA
32LG2000-ZA
801.8 x 604.2 x 227.3 mm 31.6 x 23.8 x 9.0 inches
919.6 x 682.3 x 293.8 mm 36.2 x 26.9 x 11.6 inches
1032.8 x 742.3 x 293.8 mm 40.7 x 29.3 x 11.6 inches
801.8 x 604.2 x 227.3 mm 31.6 x 23.8 x 9.0 inches
Dimensions (Width x Height x Depth)
801.8 x 544.1 x 79.0 mm 31.6 x 21.5 x 3.2 inches
919.6 x 610.3 x 89.0 mm 36.2 x 24.0 x 3.5 inches
1032.8 x 670.1 x 92.0 mm 40.7 x 26.4 x 3.7 inches
801.8 x 544.1 x 79.0 mm 31.6 x 21.5 x 3.2 inches
13.4 kg / 29.6 lbs 11.9 kg / 26.3 lbs
18.8 kg / 41.5 lbs 16.2 kg / 35.7 lbs
23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs
13.4 kg / 29.6 lbs 11.9 kg / 26.3 lbs
Power requirement Power Consumption
AC100-240V~50/60Hz 1.5A
AC100-240V~50/60Hz 1.8A
AC100-240V~50/60Hz 2.3A
AC100-240V~50/60Hz 1.5A
180W
230W
150W
APPENDIX
37LG20**
42LG20**
32LG32**
42LG32**
MODELS
37LG2000-ZA
42LG2000-ZA
32LG3200-ZA
42LG3200-ZA
919.6 x 682.3 x 293.8 mm 36.2 x 26.9 x 11.6 inches
1032.8 x 742.3 x 293.8 mm 40.7 x 29.3 x 11.6 inches
801.8 x 604.2 x 227.3 mm 31.6 x 23.8 x 9.0 inches
1032.8 x 742.3 x 293.8 mm 40.7 x 29.3 x 11.6 inches
Dimensions (Width x Height x Depth)
919.6 x 610.3 x 89.0 mm 36.2 x 24.0 x 3.5 inches
1032.8 x 670.1 x 92.0 mm 40.7 x 26.4 x 3.7 inches
801.8 x 544.1 x 79.0 mm 31.6 x 21.5 x 3.2 inches
1032.8 x 670.1 x 92.0 mm 40.7 x 26.4 x 3.7 inches
18.8 kg / 41.5 lbs 16.2 kg / 35.7 lbs
23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs
13.4 kg / 29.6 lbs 11.9 kg / 26.3 lbs
23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs
Power requirement Power Consumption
AC100-240V~50/60Hz 1.8A
AC100-240V~50/60Hz 2.3A
AC100-240V~50/60Hz 1.5A
AC100-240V~50/60Hz 2.3A
230W
150W
230W
Television System Programme Coverage External Antenna Impedance
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’ VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
Operating Temperature Operating Humidity
0 ~ 40°C / 32 ~ 104°F Less than 80%
Storage Temperature Storage Humidity

37LG50**
42LG50**
37LG5000-ZA 37LG5010-ZD 37LG5020-ZB 37LG5030-ZE
42LG5000-ZA 42LG5010-ZD 42LG5020-ZB 42LG5030-ZE
MODELS
813.8 x 598.8 x 231.9 mm 32.1 x 23.6 x 9.2 inches
936.4 x 685.4 x 293.4 mm 36.9 x 27.0 x 11.6 inches
1032.0 x 894.8 x 293.8 mm 40.7 x 35.3 x 11.6 inches
(Width x Height x Depth)
813.8 x 540.4 x 95.5 mm 32.1 x 21.3 x 3.8 inches
936.4 x 612.8 x 88.0 mm 36.9 x 24.2 x 3.5 inches
1032.0 x 662.3 x 89.0 mm 40.7 x 26.1 x 3.5 inches
14.1 kg / 31.1 lbs 12.6 kg / 27.8 lbs
18.3 kg / 40.4 lbs 15.6 kg / 34.4 lbs
26.2 kg / 57.8 lbs 23.5 kg / 51.8 lbs
AC100-240V~ 50/60Hz 1.5A
AC100-240V~ 50/60Hz 1.8A
AC100-240V~ 50/60Hz 2.3A
230W
32LG5***
47LG50**
52LG50**
32LG5700-ZF
47LG5000-ZA 47LG5010-ZD 47LG5020-ZB 47LG5030-ZE
52LG5000-ZA 52LG5010-ZD 52LG5020-ZB 52LG5030-ZE
MODELS
813.8 x 599.3 x 294.0 mm 32.1 x 23.6 x 11.6 inches
1156.2 x 813.1 x 342.9 mm 45.6 x 32.0 x 13.5 inches
1291.7 x 892.17 x 342.9 mm 50.9 x 35.2 x 13.5 inches
(Width x Height x Depth)
813.8 x 540.4 x 95.5 mm 32.1 x 21.3 x 3.8 inches
1156.2 x 739.2 x 103.0 mm 45.6 x 29.1 x 4.1 inches
1291.7 x 817.0 x 115.3 mm 50.9 x 32.2 x 4.6 inches
14.1 kg / 31.1 lbs 12.6 kg / 27.8 lbs
29.2 kg / 64.4 lbs 24.6 kg / 54.3 lbs
39.5 kg / 87.1 lbs 34.9 kg / 77.0 lbs
AC100-240V~ 50/60Hz 1.8A
AC100-240V~ 50/60Hz 3.0A
AC100-240V~ 50/60Hz 3.3A
300W
330W
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’
VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
0 ~ 40°C / 32 ~ 104°F
-20 ~ 60°C / -4 ~ 140°F
I The specifications shown above may be changed without prior notice for quality improvement.

The remote control is a multi brand or universal remote. It can be programmed. to operate most remote controlled devices from other manufacturers. Note that the remote control may not control all models from other brands.
Testing your remote control. To find out whether your remote control can operate other components without programming, turn on a component such as a STB and press the corresponding mode button (such as a STB) on the remote con- trol, while pointing at the component. Test the POWER and P buttons to see if the component responds correctly. If the component does not operate correctly, the remote control requires programming to operate the device.
Switch on the component to be programmed, then press the corresponding mode button (such as STB) on the remote control. The remote control button of the desired device is illumintated.
Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed with the code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off.
Press the MENU button to store the code.
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.

ALPHASTAR DSR 123 AMPLICA 050 BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 015 018 036 055 CHAPARRAL 008 009 012 077 CITOH 054 CURTIS MATHES 050 145 DRAKE 005 006 007 010 011 052 112 116 141 DX ANTENNA 024 046 056 076 ECHOSTAR 038 040 057 058 093 094 095 096 097 098 099 100 122 ELECTRO HOME 089 EUROPLUS 114 FUJITSU 017 021 022 027 133 134 GENERAL INSTRUMENT 003 004 016 029 031 059 101 HITACHI 139 140
HOUSTON TRACKER 033 037 039 051 057 104 HUGHES 068 JANIEL 060 147 JERROLD 061 KATHREIN 108 LEGEND 057 LG 001 LUTRON 132 LUXOR 062 144 MACOM 010 059 063 064 065 MEMOREX 057 NEXTWAVE 028 124 125 NORSAT 069 070 PACE SKY SATELLITE 143 PANASONIC 060 142 PANSAT 121 PERSONAL CABLE 117 PHILIPS 071 PICO 105 PRESIDENT 019 102 PRIMESTAR 030 110 111
PROSAT 072 RCA 066 106 REALISTIC 043 074 SAMSUNG 123 SATELLITE SERVICE CO 028 035 047 057 085 SCIENTIFIC ATLANTA 032 138 SONY 103 STARCAST 041 SUPER GUIDE 020 124 125 TEECOM 023 026 075 087 088 090 107 130 137 TOSHIBA 002 127 UNIDEN 016 025 042 043 044 045 048 049 078 079 080 086 10 135 136 VIEWSTAR 115 WINEGARD 128 146 ZENITH 081 082 083 084 091 120

A Connect your wired remote control to the Remote Control port on the TV.
Single pulse, modulated with 37.917KHz signal at 455KHz
FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3
A Configuration of frame
Lead code Low custom code High custom code Data code Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
4.5 ms 9 ms
0.55 ms
2.25 ms 9 ms
Bit ”0” Bit ”1”
0.56 ms
0.56 ms
1.12 ms
2.24 ms
The waveform is transmitted as long as a key is depressed.

Code (Hexa) Function Note
08 0B F0 45 43 AB 07 06 40 41 44 28 AA 30 02 03 00 01 1E 09 10 ~19 53 1A 72 71 63 61 20 21 39 BD
POWER INPUT TV/RADIO Q.MENU MENU GUIDE Left ( or F) Right ( or G) Up ( or D) Down ( or E) OK( ) RETURN INFO i AV MODE VOL + (or +) VOL - (or -) P (or (PR + or P +)) P (or (PR - or P -)) FAV MUTE Number Key 0~9 LIST Q.VIEW RED Key GREEN Key YELLOW Key BLUE Key TEXT T.Option SUBTITLE Ô(Record) SIMPLINK RATIO I/II SLEEP TIME REVEAL TV D/A UPDATE HOLD INDEX
R/C BUTTON (POWER ON/OFF) R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON
7E 79 0A 0E 26 2A 50 62 65 70

Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. Note: RS-232C connection cables are not supplied with the TV.


RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
PC TV
RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS
RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DTR DSR 6 4 DSR RTS 7 7 RTS CTS 8 8 CTS
D-Sub 9 D-Sub 9
D-Sub 9 D-Sub 9
3-Wire Configurations(Not standard)


Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p. 114
3 adjust Set ID to choose the desired TV ID number. The adjustment range of SET ID is 1~99.

AUse a crossed (reverse) cable.
Transmission / Receiving Protocol Command Reference List
1 COMMAND
[Command1][Command2][ ][Set ID][ ][Data][Cr]
01. Power k a 00 ~ 01 02. Aspect Ratio k c Refer to p. 112 03. Screen Mute k d 00 ~ 01 04. Volume Mute k e 00 ~ 01 05. Volume Control k f 00 ~ 64 06. Contrast k g 00 ~ 64 07. Brightness k h 00 ~ 64 08. Colour k i 00 ~ 64 09. Tint k j 00 ~ 64 10. Sharpness k k 00 ~ 64 11. OSD Select k l 00 ~ 01 12. Remote control lock mode k m 00 ~ 01 13. Balance k t 00 ~ 64 14. Colour Temperature k u 00 ~ 02 15. Abnormal Status k z 00 ~ 09 16. ISM Method j p Refer to p. 114 17. Power Saving j q 00 ~ 04 18. Auto Configure j u 01 19. Equalize j v Refer to p. 114 20. Tune Command m a Refer to p. 114 21. Channel Add/Skip m b 00 ~ 01 22. Key m c Key Code 23. Control Back Light m g 00 ~ 64 24. Input select (Main) x b Refer to p. 115
* [Command 1] : First command to control the TV. (j, k, m or x) * [Command 2] : Second command to control the TV. * [Set ID] : You can adjust the set ID to choose
desired monitor ID number in option menu. Adjustment range is 1 ~ 99. When selecting Set ID ‘0’, every connected set is controlled. Set ID is indicated as decimal (1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/ receiving protocol. * [DATA] : To transmit command data.
Transmit ‘FF’ data to read status of command. * [Cr] : Carriage Return
ASCII code ‘0x0D’ * [ ] : ASCII code ‘space (0x20)’
[Command2][ ][Set ID][ ][OK][Data][x]
* The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
* When setting the 15 ~ 24, a menu does not appear on screen.
[Command2][ ][Set ID][ ][NG][Data][x]
* The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from nonviable functions or communication errors.

G To control Power On/Off of the TV. Transmission
G To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control. Transmission
[k][a][ ][Set ID][ ][Data][Cr]
[k][e][ ][Set ID][ ][Data][Cr]
[a][ ][Set ID][ ][OK/NG][Data][x]
G To show Power On/Off. Transmission
[e][ ][Set ID][ ][OK/NG][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
G To adjust volume.
[a][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust volume with the VOLUME buttons on remote control. Transmission
* Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back pre- sents status about each function. * OK Ack. ,Error Ack. and other message maybe display on the screen when TV is power On.
[k][f][ ][Set ID][ ][Data][Cr]
* Refer to ‘Real data mapping 1’. See page 114.
[f][ ][Set ID][ ][OK/NG][Data][x]
G To adjust the screen format. (Main picture format)
You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu. Transmission
G To adjust screen contrast.
You can also adjust contrast in the PICTURE menu. Transmission
[k][c][ ][Set ID][ ][Data][Cr]
[k][g][ ][Set ID][ ][Data][Cr]
* Refer to ‘Real data mapping 1’. See page 114.
[g][ ][Set ID][ ][OK/NG][Data][x]
[c][ ][Set ID][ ][OK/NG][Data][x]
G To adjust screen brightness.
* Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. * In HDMI/Component (over 720p) mode, Just Scan is available. * You can only select Original in UK digital teletext (MHEG-5).
You can also adjust brightness in the PICTURE menu. Transmission
[k][h][ ][Set ID][ ][Data][Cr]
* Refer to ‘Real data mapping 1’. See page 114.
[h][ ][Set ID][ ][OK/NG][Data][x]
G To select screen mute on/off. Transmission
G To adjust the screen colour.
[k][d][ ][Set ID][ ][Data][Cr]
You can also adjust colour in the PICTURE menu. Transmission
[k][i][ ][Set ID][ ][Data][Cr]
[d][ ][Set ID][ ][OK/NG][Data][x]
* Refer to ‘Real data mapping 1’. See page 114.
[i][ ][Set ID][ ][OK/NG][Data][x]

G To adjust the screen tint.
G To adjust balance.
You can also adjust tint in the PICTURE menu.
You can also adjust balance in the AUDIO menu. Transmission
[k][j][ ][Set ID][ ][Data][Cr]
[k][t][ ][Set ID][ ][Data][Cr]
* Refer to ‘Real data mapping 1’. See page 114.
* Refer to ‘Real data mapping 1’. See page 114.
[j][ ][Set ID][ ][OK/NG][Data][x]
[t][ ][Set ID][ ][OK/NG][Data][x]
G To adjust the screen sharpness.
G To adjust colour temperature. You can also adjust
You can also adjust sharpness in the PICTURE menu. Transmission
Colour Temperature in the PICTURE menu. Transmission
[k][k][ ][Set ID][ ][Data][Cr]
[k][u][ ][Set ID][ ][Data][Cr]
* Refer to ‘Real data mapping 1’. See page 114.
[k][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data][x]
G To recognize an abnormal state. Transmission
G To select OSD (On Screen Display) on/off when
controlling remotely.
[k][z][ ][Set ID][ ][FF][ ][Cr]
[k][l][ ][Set ID][ ][Data][Cr]
[z][ ][Set ID][ ][OK/NG][Data][x]
[l][ ][Set ID][ ][OK/NG][Data][x]
G To lock the front panel controls on the monitor and
remote control. Transmission
[k][m][ ][Set ID][ ][Data][Cr]
* This function is “read only”.
[m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this mode. When main power is on/off, external control lock is released.

G To adjust equalize. Transmission
G To control the ISM method. You can also adjust ISM
Method in OPTION menu. Transmission
[j][v][ ][Set ID][ ][Data][Cr]
[j][p][ ][Set ID][ ][Data][Cr]
Data :
0
Frequency : 0 120Hz 1 200Hz 2 500Hz 3 1.2kHz 4 3kHz 5 7.5kHz 6 12kHz Step (Frequency data): Refer to ‘Real data mapping 3’. See page 115.
[p][ ][Set ID][ ][OK/NG][Data][x]
G To reduce the power consumption of the TV. You can also
[v][ ][Set ID][ ][OK/NG][Data][x]
adjust Low Power in OPTION menu. Transmission
* Euqalize command expression
7 6 5 4 3 2 1 0 Frequency
[j][q][ ][Set ID][ ][Data][Cr]
Data Min :00 ~ Max :04 (*transmit by hexadecimal code)
[q][ ][Set ID][ ][OK/NG][Data][x]
1.2KHz
7.5KHz
G To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode. Transmission
[j][u][ ][Set ID][ ][Data][Cr]
7 6 5 4 3 2 1 0
0
[u][ ][Set ID][ ][OK/NG][Data][x]
0 1
1
* Real data mapping 1
* Real data mapping 2
00 :-40 01 :-39 02 :-38
Ex) If you wish to set frequency 500Hz and -20 value on
menu OSD, refer to ‘Real data mapping 3’ and then find Step value for -20. 010 (500Hz) 00011(Step 3) => 01000011 => 43 (Hexadecimal) : [j][v][ ][Set ID][ ][43][Cr]
28 :0
* 3 bits of Frequency and 5 bits of Step makes 8 bits (1 byte). Change 8 bits to Hexadecimal code.

G Select channel to following physical number. Transmission
G To select input source for main picture. Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
[x][b][ ][Set ID][ ][Data][Cr]
ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 88 (188H), DTV No. 0 -> Don’t care Data 02 : 0x00 : ATV, 0x10 : DTV, 0x20 : Radio
0
Analogue - Min: 00 ~ Max: 63 (0~99) Digital - Min: 00 ~ Max: 3E7 (0~999)
External Input Input Number
[a][ ][Set ID][ ][OK/NG][Data][x]
0 0 0 1 Analogue
0 1 0 0 Component
G To set skip status for the current Programme. Transmission
1 0 0 1 HDMI
[m][b][ ][Set ID][ ][Data][Cr]
0 Input1
[b][ ][Set ID][ ][OK/NG][Data][x]
0 0 0 1 Input2
0 0 1 0 Input3
G To send IR remote key code. Transmission
[m][c][ ][Set ID][ ][Data][Cr]
[b][ ][Set ID][ ][OK/NG][Data][x]
Data Key code - Refer to page 108.
[c][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping 3 (Equalize)
Step: OSD 00 : -24 01 : -23 02 : -21 03 : -20 04 : -18 05 : -16 06 : -15 07 : -13 08 : -12 09 : -10 10 : -8 11 : -7 12 : -5 13 : -4 14 : -2 15 : 0
Step: OSD 16 : 1 17 : 3 18 : 4 19 : 6 20 : 7 21 : 9 22 : 10 23 : 12 24 : 13 25 : 15 26 : 16 27 : 18 28 : 19 29 : 21 30 : 22 31 : 24
G To Cont rol t he back light. Transmission
[m][g][ ][Set ID][ ][Data][Cr]
[g][ ][Set ID][ ][OK/NG][Data][x]


Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.