


32LC2R*/37LC2R* 42PC1RV* 42LC2R* 50PC1R* 32LB1R*/37LB1R* 50PC3R* 42LB1R*
32LC2R*/37LC2R* 42PC1RV* 42LC2R* 50PC1R* 32LB1R*/37LB1R* 50PC3R* 42LB1R*
Please read Information Manual included together before reading this manual and oper- ating your set.
¥d§v Æd«¡… œ∞Oq «∞LFKu±U‹ «∞Ld≠o Æ∂q Æd«¡… ≥c« «∞b∞Oq Ë¢AGOq «∞πNU“.
Eç æ^LXZ¿Öç vó ¿ÇÜ_L}FÑ. |á EL_RñÑ Õ|á ÖèÀïÑ ¿ÇRåAŒ ‡Õ|á Ö_É_Ñ ¿ÇRåAŒ ‡Qåé dâr ¿ÇRåAŒ. pâZÖA KULA» ÇÉeñAàé, ¡àn\ ¿ÇÜÉe~ ¿ÇÜ\v~ pÉò ¿ÇtkA ¿ÇXÉwò ‡|á ECpkA ¿ÇÜqÉèÖA∆¿ÇÜZ‡àé pÉñç ÇÉFAôr.
Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.




Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product.
INPUT
TV TV
POWER
INPUT
ARC
DVD
VCR
PIP PRPIP PR+ SWAP PIP INPUT
TEXT PIP SIZE POSTION
* 10 FAV
TIME REVEAL INDEX
Remote Control Polishing Cloth Polish the screen with the cloth
Owner’s Manual Batteries Power Cord
This feature is not available
for all models.
For 42PC1R*, 50PC1R*, 50PC3R*
2-bolts for stand assembly (Refer p.13) This feature is not available
for all models.

2-TV brackets 2-Wall brackets 2-bolts
Twister Holder Arrange the wires with the twister holder.



Screen Menu Options Auto Configure (RGB [PC] mode only) 64 Manual Configure 65 Setting the Picture Format 66-67 Selecting Wide VGA/XGA mode 68 Initializing (Reset to original factory settings) 68
APPENDIX
External Control Device Setup 69-75 IR Codes 76 Remote control ir codes 77 Programming the Remote 78 Programming code 79-80 Troubleshooting Checklist 81-82 Maintenance 83 Product Specifications 84-85

CONTROLS
This manual explains the features available on the 42PC1R*, 50PC1R* TVs.


This manual explains the features available on the 50PC3R* TVs.

INPUT

CONNECTION OPTION
This is the back panel of models 42PC1R*, 50PC1R*, 50PC3R* TVs.

AUDIO Input Connections are available for listening stereo sound from an external device.
VIDEO Input Connects the video signal from a video device.
Connect a HDMI signal to HDMI/DVI IN. Connect DVI(VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
RGB/Audio Input Connect the monitor output from a PC/DTV to the appropriate input port.
RS-232C Input(CONTROL&SERVICE)Port
AV OUT Connect the second TV or monitor to the AV OUT socket on the set.
Connect the serial port of the control devices to the RS-232C jack.
Variable Audio Output Connect an external amplifier or add a sub woofer to your surround sound system.
Connect S-Video out from an S-VIDEO device.
Audio/Video Input Connect audio/video output from an external device to these jacks.
Power Cord Socket This the set operates on an AC power. The volt- age is indicated on the Specifications page. Never attempt to operate the set on DC power.
Component Input Connect a component video/audio device to these jacks.

This manual explains the features available on the 32LC2R*, 37LC2R*, 42LC2R* TVs.
.■This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
Front Panel







R
INPUT
/I
Side Panel

CONTROLS
This manual explains the features available on the 32LB1R*, 37LB1R*, 42LB1R* TVs.
Front Panel Controls
RGB
PC PC



PC


PROGRAMME Buttons MENU Button

This is the back panel of models 32LC2R*, 37LC2R*, 42LC2R* TVs.

AUDIO Input Connections are available for listening stereo sound from an external device.
VIDEO Input Connects the video signal from a video device.

CONNECTION OPTION
This is the back panel of models 32LB1R*, 37LB1R*, 42LB1R* TVs.

RGB/Audio Input Connect the monitor output from a PC/DTV to the appropriate input port.
Connect a HDMI signal to HDMI/DVI IN. Connect DVI(VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
AV OUT Connect the second TV or monitor to the AV OUT socket on the set.
RS-232C Input(CONTROL&SERVICE)Port
Connect the serial port of the control devices to the RS-232C jack.
Component Input Connect a component video/audio device to these jacks.
Connect S-Video out from an S-VIDEO device.
Variable Audio Output Connect an external amplifier or add a sub woofer to your surround sound system.
Audio/Video Input Connect audio/video output from an external device to these jacks.
Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

Switches the set on from standby or off to standby.
@@@@@@@@e? @@@@@@@@e? @@h?
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
POWER
@@
@@
@@
@@
@@
@@
Returns from AV1, AV2, Component1,Component2, RGB, HDMI/DVI to the TV mode. Switches the set on from standby.
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@g @@@@@@@@ @@@@@@@@
@@@@@@@@e? @@@@@@@@e? @@h?
?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@
@@g @@@@@@@@ @@@@@@@@
?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
TEXT PIP SIZE POSTION
INPUT
If you press the button once, the input source OSD will appear on screen. Press the D / E button and then OK but- ton to select the desired input source (TV, AV1, AV2, Component1, Component2, RGB, HDMI/DVI ).Switches the set on from standby.
ARC
Selects your desired picture format.
Adjusts screen brightness. It returns to the default settings brightness by changing mode source.
Switches the sub picture PIP, DW, POP or off mode. Adjusts the sub picture size.
Moves the sub picture.
Selects a programme for the sub picture.
Exchanges the main/sub images in PIP/Double window mode.
Selects the input source for the sub picture in PIP/Double window mode.
These buttons are used for teletext (only TELETEXT models) or Programme edit.
Controls some video cassette recorders or DVD players when you have already selected DVD or VCR mode button.
Clears all on-screen displays and returns to TV viewing from any menu.
LIST
Displays the programme table.
Selects a menu.
Selects the sound output.
Sets the sleep timer.

REMOTE CONTROL KEY FUNCTIONS

These buttons are used for teletext. For further details, see the ‘Teletext’ section.
?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
Allows you to navigate the on-screen menus and adjust the system settings to your preference.
?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
Selects available programmes. Switches the set on from standby.
Selects a programme. Selects numbered items in a menu. Switches the set on from standby.
?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@
?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@

UNFOLDING THE BASE STAND (42PC1R*)




Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward.
After unfolding the stand, please insert and tighten the screws in the holes (B) on the bottom of the stand.
This may cause the set to fall, causing serious bodily injury and serious damage to the set.

Figures shown here may be slightly different from your set.
First remove the screws in the holes (B) on the bottom of the stand. And then pull two Hooks (D) of the stand bottom and fold the stand into the back of the set.
After folding, push two Locks (A) of the stand bottom outward.

STAND INSTALLATION ( Only 32LC2R* )
Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage.

Place the product stand on the product as shown.
Install the 4 bolts securely, in the back of the product in the holes provided.

- This feature is not available for all models.
- The TV can be conveniently swiveled on its stand 30° to the left or right to provide the optimum viewing angle.


Hold the CABLE MANAGEMENT with both hands and push it as shown.
To connect an additional equipment, see the External equipment Connections section.

BASIC CONNECTION ( LCD TV models)
(a) - 32LC2R*. (b) - 37LC2R*, 42LC2R*, 32LB1R*, 37LB1R*, 42LB1R*.

Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder.
To connect an additional equipment, see the External equipment Connections section.
Bundle the cables using the supplied twister holder. 3
HOW TO REMOVE THE CABLE MANAGEMENT ( LCD TV models)
Hold the CABLE MANAGEMENT with both hands and pull it upward.
G Do not hold the CABLE MANAGEMENT when moving the product.
If the product is dropped, you may be injured or the product may be broken.

HOW TO JOIN THE PRODUCT ASSEMBLY TO THE WALL TO PROTECT THE SET TUMBLING
product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children don’t climb on or hang from the product.


INSTALLATION
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall.

Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

G When moving the product to another place undo the ropes first.
G Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.
G To use the product safely make sure that the height of the bracket that is mounted on the wall is same as

INSTALLATION
Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possi- ble, have a qualified electrician install a separate circuit break- er. Do not try to ground the unit by connecting it to tele- phone wires, lightening rods, or gas pipes.

For proper ventilation, allow a clearance of 4" on each side and from the wall.

For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instruc- tions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
Remove two screws of the backside of the set before installing the wall mounting bracket.
Power Supply · Short-circuit · Breaker


Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)
install a signal amplifier to the antenna as shown to the right.

VCR SETUP
screen may remain visible on the screen.

Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the set.
Connect the antenna cable to the ANT IN antenna socket of the VCR.
Press the PLAY button on the VCR and match the appropriate programme between the TV and VCR for viewing.
When connecting with a RCA cable


Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
Select AV1 input source using the INPUT button on the remote control. - If connected to AV IN2, select AV2 input

G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack


Connect the S-VIDEO output of the VCR to the S-VIDEO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input.

Connect the audio outputs of the VCR to the AUDIO input jacks on the set.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
Select AV1 input source with using the INPUT button on the remote control.

G If both S-Video and VIDEO sockets have been connected to the S-VHS VCR simultaneousiy.

Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
Select AV2 input source with using the INPUT button on the remote control. - If connected to AV IN1 input, select AV1 input
Operate the corresponding external equipment. Refer to external equipment operating guide.

DVD SETUP
When connecting with a component cable

Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the set.

Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set.
Select Component1 or Component2 input source with using the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.
To get better picture quality, connect a DVD player to the component input ports as shown below.
Y PB PR Component ports on the TV


Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set.
Connect the audio outputs of the DVD to the AUDIO input jacks on the set.
Select AV1 input source with using the INPUT button on the remote control.
Refer to the DVD player's manual for operating instructions.

Connect the HDMI output of the DVD to the HDMI/DVI IN jack on the set.
Select HDMI/DVI input source with using the INPUT button on the remote control.
REMOTE
CONTROL IN
Refer to the DVD player's manual for operating instructions.
HDMI-DVD OUTPUT
NOTE !
G TV can receive the video and audio signal simultaneously with using a HDMI cable.
G If the DVD supports Auto HDMI function, the DVD output resolution will be automatically set
to 1280x720p.
G If the DVD does not support Auto HDMI, you need to set the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the DVD to 1280x720p.

STB(SET-TOP BOX) SETUP
receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT IN VIDEO jacks on the set.
Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the set.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select Component1 or Component2 input source with using the INPUTbutton on the remote control.
When connecting with a HDMI to DVI cable
Connect the DVI output of the digital set-top box to the HDMI/DVI IN jack on the set.
RGB (PC/DTV)
AUDIO (RGB/DVI)
AV OUT V OUT
Connect the audio outputs of the set-top box to the AUDIO(RGB/DVI) jack on the set.
AV IN 1 V IN 1
S-VIDEO VIDEO
S-VIDEO
MONO ( )
AUDIO AUDIO
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select HDMI/DVI input source with using the INPUT button on the remote control.
NOTE !
G If the digital set-top box has a DVI output and no HDMI output, a separated audio connec-
tion is necessary.
G If the digital set-top box supports Auto DVI function, the output resolution of the digital
set-top box will be automatically set to 1280x720p.
G If the digital set-top box does not support Auto DVI, you need to set the output resolution
appropriately. To get the best picture quality, adjust the output resolution of the digital set- top box to 1280x720p.
Digital Set-top Box


Connect the RGB output of the digital set-top box to the RGB IN (PC/DTV) jack on the set.

Connect the audio outputs of the set-top box to the AUDIO (RGB/DVI) jack on the set.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
Select RGB-DTV input source with using the INPUT button on the remote control.
When connecting with a HDMI cable

Connect the HDMI output of the digital set-top box to the HDMI /DVI IN jack on the set.
Select HDMI /DVI input source with using the INPUT button on the remote control.
CONTROL IN
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

G TV can receive the video and audio signal simultaneously with using a HDMI cable.
G If the digital set-top box supports Auto HDMI function, output resolution of the digital set-top
G If the digital set-top box does not support Auto HDMI, you need to set the output resolution
appropriately. To get the best picture quality, adjust the output resolution of the digital set-top box to 1280x720p.
Digital Set-top Box

PC SETUP

Connect the RGB output of the PC to the RGB (PC/DTV) jack on the set.

Connect the audio outputs of the PC to the AUDIO(RGB/DVI) jack on the set.
Select RGB-PC input source with using the INPUT button on the remote control.
When connecting with a HDMI to DVI cable

Connect the DVI output of the PC to the HDMI /DVI IN jack on the set.

Connect the audio outputs of the PC to the AUDIO(RGB/DVI) jack on the set.
RS-232C IN RS-232C IN (CONTROL & SERVICE) HDMI/DVI IN HDMI/DVI IN
Select HDMI /DVI input source with using the INPUT button on the remote control.

G If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
G If the PC does not support Auto DVI, you need to set the output resolution appropriately. To
get the best picture quality, adjust the output resolution of PC graphics card's output resolu- tion to 1024x768, 60Hz.

G To enjoy vivid picture and sound, connect a PC to
G Connect the signal cable from the monitor output
the set.
port of the PC to the RGB (PC/DTV) port of the set or the signal cable from the HDMI output port of the PC to the HDMI IN port on the set.
G Avoid keeping a fixed image on the set’s screen for
a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
G Connect the audio cable from the PC to the
Audio input on the set. (Audio cables are not included with the set).
G Connect PC to the RGB (PC/DTV) or HDMI IN
port of the set; change the resolution output of PC accordingly.
G If using a sound card, adjust PC sound as required.
G This set uses a VESA Plug and Play Solution. The
G There might be noise according to some resolu-
set provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this set.
tion, vertical pattern, contrast or brightness in PC mode. Change the PC mode into another resolu- tion or change the refresh rate into another rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card.
G DDC protocol is preset for RGB (Analog RGB),
HDMI (Digital RGB) mode.
G If required, adjust the settings for Plug and Play
functionally.
G If graphic card on the PC does not output analog
and digital RGB simultaneously, connect only one of either RGB (PC/DTV) or HDMI IN to display the PC on the set.
G The synchronization input waveform for Horizontal and Vertical frequencies are separate.
G In 42PC1R*, 50PC1R*, 50PC3R* models, we rec-
G If graphic card on the PC does output analog and
ommend using 1024x768, 60Hz for the PC mode, they provide the best picture quality.
digital RGB simultaneously, set the set to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the set.)
GWe recommend using 1360*768, 60Hz (32LC2R*,
37LC2R*, 42LC2R*,32LB1R*, 37LB1R*. 42LB1R*) for the PC mode, they provide the best picture quality.
G DOS mode may not work depending on video
card if you use a HDMI to DVI cable.
G If the resolution of PC is over UXGA, there will be
G When you use too long RGB-PC cable, there
no picture on the set.
might be a noise on the screen. We recommend using under 5m of the cable. It provides the best picture quality.

Supported Display Resolution (32LC2R*, 37LC2R*, 42LC2R*,32LB1R*, 37LB1R*, 42LB1R*) RGB[PC] / HDMI[PC] mode
Supported Display Resolution (42PC1R*, 50PC1R*, 50PC3R*) RGB[PC] / HDMI[PC] mode
Horizontal Vertical Frequency(KHz) Frequency(Hz) Resolution
Resolution Horizontal Vertical Frequency(KHz) Frequency(Hz)
31.469 37.500
59.94 75.00
31.469 35.00 37.861 37.500
59.94 66.66 72.80 75.00
37.879 46.875
60.31 75.00
31.5 37.799 39.375
60.00 70.00 75.00
48.363 56.476 60.023
60.00 70.06 75.02
31.5 37.799 39.975
60.00 70.00 75.00
37.897 48.077 46.875
60.31 72.18 75.00
48.363 56.476 60.023
60.00 70.06 75.02
47.693 60.091
59.99 74.93
47.700 59.625
60.00 75.02
47.700 59.625
60.00 75.02


If your TV will be turned on, you will be able to use its features.

First, connect power cord correctly. At this moment, the TV switches to standby mode.

Press the VOL +/- button to adjust the volume.
If you want to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE, VOL +/- or I/II button.

Press the PR +/- or NUMBER button to select a pro- gramme number.
- The menus can be shown on the screen in the selected language. First select your language.
Press the MENU button and then use D / E button to select the SPECIAL menu.


Press the G button and then use D / E button to select Language.
away on vacation, disconnect the power plug from wall power outlet.
Press the G button and then use D / E button to select your desired language. From this point on, the on-screen menus will be shown in the language of your choice.

PIP (PICTURE-IN-PICTURE) / DOUBLE WINDOW / POP
PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image.
TV TV
POWER
DVD
INPUT
ARC
VCR
Double window mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. Each source is given half the screen.
PIP PRPIP PR+ SWAP PIP INPUT
Watching PIP/Double Window/POP
Press the PIP button to access the sub picture. Each press of PIP changes the PIP options as shown below.


Press the PIP PR +/- button to select a programme for the sub picture.

Press the PIP INPUT button to select the input source for the sub picture. Each press of PIP INPUT button is pressed, each input source for the sub picture is displayed as shown below.
TV AV1 AV2 Component1
Repeatedly press the SIZE button to select the desired sub picture size.

Press the POSITION button repeatedly until desired position is achieved. The sub picture moves clockwise.
Adjusting PIP Transparency (PIP mode only)
Press the MENU button and then D / E button to select the SCREEN menu.
Press the G button and then D / E button to select
PIP Transparency.
Press the G button and then F / G button to adjust PIP Transparency.
RGB HDMI/DVI Component2

PIP (PICTURE-IN-PICTURE) / DOUBLE WINDOW / POP
Swapping between main and sub pictures
Press the SWAP button to exchange the main and sub pictures.


Main Picture Sub Picture
Use POP to search the programmes of all the memorized channels one-by-one on the 3 POP screen display, (while the main picture source remains the current channel). The pictures of all the pro- grammed channels are searched with the 3 POP screen.


Teletext (or TOPtext) is an optional function, therefore only a setwith the teletext system can receive the teletext broadcast.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
Press the TEXT button to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT or EXIT button to switch off teletext. The previous mode reappears.
A Page selection

TOP Text
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block.
A Block / group / page selection
A Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode.
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corre- sponding coloured button.
A Page selection

Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display.
Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display.
Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Press this button to view the updated teletext page.
When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page num- ber. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, F / G or NUMBER buttons. Press again to exit this function.
A HOLD
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The num- ber of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited. To continue press this button again.

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.

Press the MENU button and then D / E button to display each menu.
Press the G button and then D / E button to select a menu item.
Change the setting of an item in the sub or pull-down menu with F / G button.
You can move to the higher level menu by pressing the OK or MENU button.


Prev. Menu Prev. Menu

a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it pro-
vides graphical presentation. b. In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example to
help the TV operation. (The OSD mainly use pictures for the 42PC1R*, 50PC1R*, 50PC3R*.) c. In the teletext mode, menus are not displayed. d. In some models, XGA will display on the SCREEN menu. e. It’s not available to use ISM Method and Low Power in 32LC2R*, 37LC2R*, 42LC2R*, 32LB1R*,
SCREEN menu · SOUND menu

AUTO PROGRAMME TUNING
Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR +/- or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes.
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
Press the MENU button and then D / E button to select the STATION menu.
Press the G button and then D / E button to select Auto programme.
Favourite prog.
Press the G button and then D / E button to select System.
Press the F / G button to select a TV system menu;
L : SECAM L/L’ (option) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia
/ New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) M : (USA / Korea / Philippines) (option)
System BG Storage from 1 Start
Favourite prog.
Press the D / E button to select Storage from.
Press the F / G button or NUMBER buttons to select the beginning programme number. If you use NUMBER buttons, any number under 10 is entered with a numeric ‘0’ in front of it, i.e.‘05’ for 5.
Press the D / E button to select Start.
Press the G button to begin auto programming. All receivable stations are stored.
To stop auto programming, press the MENU button. When auto programming is completed, the Programme edit menu appears on the screen. See the Programme edit section to edit the stored programme.

MANUAL PROGRAMME TUNING
Manual programme lets you manually tune and arrange the stations in whatever order you desire.
Press the MENU button and then D / E button to select the STATION menu.
Press the G button and then D / E button to select Manual programme.
Press the G button and then D / E button to select Storage.
Press the F / G button or NUMBER buttons to select the desired programme number (0 to 99). If you use NUMBER buttons, any number under 10 is entered with a numeric ‘0’ in front of it, i.e. ‘05’ for 5.
Favourite prog.
Press the D / E button to select System.
Press the F / G button to select a TV system menu;
L : SECAM L/L’ (option) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia
/ New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) M : (USA / Korea / Philippines) (option)
Storage 5 System BG Band V/UHF Channel 5 Fine Search Name
Favourite prog.
Press the D / E button to select Band.
Press the F / G button to select V/UHF or Cable.
C 05 Booster Off
Press the D / E button to select Channel.
You can select the desired programme number with the F / G button or number buttons. If possible, select the programme number directly with the number buttons. Any number under 10 is entered with a numeric ‘0’ in front of it, i.e. ‘05’ for 5.
Press the D / E button to select Search.
Press the F / G button to commence searching. If a station is found the search will stop.
Press the OK button to store it.
To store another station, repeat steps 3 to 13.

Normally fine tuning is only necessary if reception is poor.
Press the MENU button and then D / E button to select the
STATION menu.
Press the G button and then D / E button to select Manual
programme.
Favourite prog.
Press the G button and then D / E button to select Fine.
Press the F / G button to to fine tune for the best picture and sound.
Press the OK button to store it.
Storage 5 System BG Band V/UHF Channel 5 Fine FG Search Name
Favourite prog.
C 05 Booster Off

ASSIGNING A STATION NAME
You can assign a station name with five characters to each programme number.
Press the MENU button and then D / E button to select the STATION menu.
Press the G button and then D / E button to select Manual
programme.
Favourite prog.
Press the G button and then D / E button to select Name.
Press the G button and then D / E button. You can use a
blank, +, -, the number 0 to 9 and the alphabet A to Z.
Press the F / G button to select the position and make
Storage 5 System BG Band V/UHF Channel 5 Fine Search Name G C 05 Booster Off
your choice of the second character, and so on.
Favourite prog.
Press the OK button to store it.

In some models, Booster is an optional function. Only a set with Booster can perform this function.
If the reception is poor at the fringe area of TV signal, select Booster to On.
Press the MENU button and then D / E button to select the STATION menu.
Favourite prog.
Press the G button and then use D / E button to select
Booster.
Press the G button and then use D / E button to select
On or Off.
Storage 5 System BG Band V/UHF Channel 5 Fine Search Name
Favourite prog.
C 05 Booster FG On

PROGRAMME EDIT

This function enables you to delete or skip the stored pro- grammes. Also you can move some stations to other pro- gramme numbers or copy a blank station data into the selected programme number.
Press the MENU button and then D / E button to select the STATION menu.
Press the G button and then D / E button to select Programme edit.

Press the G button to display the Programme edit menu.
A Deleting a programme
1.Select a programme to be deleted with the D / E / F / G button. 2.Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position.
A Copying a programme
1.Select a programme to be copied with the D / E / F / G button. 2.Press the GREEN button. All the following programmes are shifted down one position.
A Moving a programme
1.Select a programme to be moved with the D / E / F / G button. 2.Press the YELLOW button. 3.Move the programme to the desired programme number with the D / E / F / G button. 4.Press the YELLOW button again to release this function.
A Skipping a programme number
1.Select a programme number to be skipped with the D / E / F / G button. 2.Press the BLUE button. The skipped programme turns to blue. 3.Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped pro gramme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.

This function lets you select your favourite programmes directly. Repeatedly press the FAV button to select stored favourite programmes.
Press the MENU button and then D / E button to select the STATION menu.
Press the G button and then D / E button to select Favourite programme.
Press the G button.
Favourite prog.
Press the D / E button to select -.
Select a desired programme with the F / G button or NUMBER buttons. Any number under 10 is entered with a numeric ‘0’in front of it, i.e.‘05’ for 5.
-
To store another programme, repeat steps 4 to 5.
Favourite prog. G
You can store up to 8 programmes.

CALLING THE PROGRAMME TABLE
You can check the programmes stored in the memory by displaying the programme table.
A Displaying programme table
Press the LIST button to display the Programme table menu. The programme table appears on the screen. One programme table contains ten programmes as below.
a. You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit mode. b. Some programmes with the channel number shown in the pro- gramme table indicate there is no station name assigned.
6 S 16
7 S 17
8 S 18
4 S 14
9 S 19
A Selecting a programme in the programme table
Select a programme with the D / E / F / G button. Then press the OK button. The set switches to the chosen programme number.
A Paging through a programme table
There are 10 programme table pages in which contain 100 programmes. Pressing the D / E / F / G button repeatedly turns the pages.
Press the LIST button to return to normal TV viewing.
Programme List

PSM (Picture Status Memory)
Dynamic Select this option to display with a sharp image. Standard The most general and natural screen display status. Mild Select this option to display with a mild image.
User 1/2 Select this option to use the user-defined setting.
Press the MENU button and then D / E button to select the PICTURE menu.
CSM
Press the G button and then D / E button to select PSM.
Press the G button and then D / E button to select Intelligent Eye (only 32LB1R*/ 37LB1R*/ 42LB1R*) Dynamic, Standard, Mild, User 1, or User 2.
Dynamic Standard Mild User 1 User 2


Contrast Adjusts the difference between the light and dark levels in the picture.
Brightness Increases or decreases amount of white in the your picture.
Colour Adjusts intensity of all colours.
Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image.
Tint Adjusts the balance between red and green levels.

Press the MENU button and then D / E button to select the PICTURE menu.

Press the G button and then D / E button to select PSM.
Press the G button and then D / E button to select User 1, or User 2.
Press the G button and then D / E button to select the desired picture option (Contrast, Brightness, Colour, Sharpness, or Tint).
Press the F / G button to make appropriate adjustments.

Contrast 100 G Brightness 50 Colour 50 Sharpness 50 Tint 0

- You can’t adjust, colour, sparpness and tint in the RGB-PC, HDMI-PC mode to the levels you prefer.

To initialize values (reset to default settings), select the Cool option.
Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue.
Press the MENU button and then D / E button to select the PICTURE menu.
Press the G button and then D / E button to select CSM.
CSM
Press the G button and then D / E button to select
either Cool, Normal, Warm, or User.
CSM G
Cool Normal Warm User

MANUAL COLOUR TEMPERATURE CONTROL (CSM - User option)
You can adjust red, green, blue to any colour temperature you pre- fer.
Press the MENU button and then D / E button to select the PICTURE menu.
CSM
Press the G button and then D / E button to select CSM.
Press the G button and then D / E button to select User.
Press the G button and then D / E button to select
Red, Green, or Blue.
CSM
Cool Normal Warm User G
Press the F / G button to make appropriate adjustments.
Red 0 G Green 0 Blue 0

LIST I/II MENU XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm.
This menu is activatived after selecting the User1 or User2 of PSM.
Press the MENU button and then D / E button to select the PICTURE menu.
Press the G button and then D / E button to select XD.
Press the G button and then D / E button to select
Manual.
Press the G button and then D / E button to select
XD Contrast, XD Colour, XD NR or MPEG NR.
Press the G button and then F / G button to make
appropriate adjustments.
CSM
G
XD NR

ADVANCED
LIST I/II MENU When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen.
Cinema- function works in the following mode: TV, AV1, AV2 or Component1/2 480i/576i.
Black Level- function works in the following mode: AV(NTSC), HDMI[PC/DTV].
Press the MENU button and then D / E button to select the PICTURE menu.
CSM
Press the G button and then D / E button to select Advanced.
Press the G button and then D / E button to select Cinema or Black Level.
Press the G button and then D / E button to select On, Off, Low or high.
CSM

Press the MENU button and then D / E button to select the PICTURE menu.
Press the G button and then D / E button to select Reset.
Press the G button to initialize the adjusted value.
at the factory.
PSM
CSM

SSM (Sound Status Memory)
You can select your preferred sound setting; Surround MAX, Flat, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer.
SSM lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the programme content.
When adjusting sound equalizer manually, SSM automatically switches User.
Surround MAX, Flat, Music, Movie, and Sports are preset for good sound quality at the factory and are not adjustable.
Surround MAX Select this option to sound realistic. Flat The most commanding and natural audio. Music Select this option to enjoy the original sound when lis tening to the music. Movie Select this option to enjoy sublime sound. Sports Select this option to watch sports broadcasting. User Select this option to use the user-defined audio set- tings.
AVL
SSM G
Surround MAX Flat Music Movie Sports User
Press the MENU button and then D / E button to select the SOUND menu.
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select Surround MAX, Flat, Music, Movie, Sports, or User.

SOUND FREQUENCY ADJUSTMENT (SSM - User option)
Adjust the sound equalizer.

Press the MENU button and then D / E button to select the SOUND menu.
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select User.

Select a sound band by pressing the D / E button.
Make appropriate sound level with the F / G button.
120Hz F G 200Hz 500Hz 1.2KHz 3KHz 7.5KHz 12KHz

AVL (Auto Volume Leveler)
AVL automatically keeps on an equal volume level even if you change programmes.
Press the MENU button and then D / E button to select the SOUND menu.
Press the G button and then D / E button to select AVL.
AVL
Press the G button and then D / E button to select On or Off.
AVL G
BALANCE ADJUSTMENT
You can adjust the sound balance of speaker to the levels you prefer.
AVL
Press the MENU button and then D / E button to select the SOUND menu.
Press the G button and then D / E button to select Balance.
Press the G button and then F / G button to make desired adjustment.

You can adjust the internal speaker status. In AV1, AV2,COMPONENT1 , COMPONENT2, RGB and HDMI/DVI with HDMI to DVI cable, TV speaker and/or vari- able audio can be outputted even though there is no video signal. If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
Press the MENU button and then D / E button to select the SOUND menu.
Press the G button and then D / E button to select Speaker.
Press the G button and then D / E button to select
AVL
On or Off.
AVL
Speaker G On Off
Balance 0 · Speaker · Balance

STEREO/DUAL RECEPTION
LIST I/II MENU When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
DUAL I Sends the primary broadcast language to the loudspeakers.
DUAL II Sends the secondary broadcast language to the loudspeakers.
DUAL I+II Sends a separate language to each loudspeaker.
Broadcast Mono Stereo Dual
On Screen Display MONO STEREO DUAL I
A Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I/II button twice. In mono reception, the depth of sound is improved. To switch back to stereo, press the I/II button twice again.
A Language selection for dual language broadcast
If a programme received two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.

If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received broadcast as follows by press- ing the I/II button repeatedly.
When NICAM mono is received, you can select NICAM MONO or FM MONO.
When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono.
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO.
In AV1, AV2, Component1, Component2, RGB, HDMI/DVI mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I/II button to select the sound output.
L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio
R input is sent to the right loud speaker. L+L: Audio signal from audio L input is sent to left and right loud speakers. R+R: Audio signal from audio R input is sent to left and right loud speakers.

CLOCK SETUP
LIST I/II MENU You must set the time correctly before using on/off time function.
If current time setting is erased by a power failure or the set is unplugged, reset the clock. After approx. 5 minutes.
Press the MENU button and then D / E button to select the TIME menu.
Press the G button and then D / E button to select Clock.
Press the G button and then D / E button to set the hour.
Press the G button and then D / E button to set the minutes.

The Off time automatically switches the set to standby at the preset time.
Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a but- ton has been pressed.
Once the on time/off time is set, these functions operate daily at the preset time.
Off time function overrides On timer function if they are set both to the same time.
The set must be in standby mode for the On timer to work.
Press the MENU button and then D / E button to select the TIME menu.
Press the G button and then D / E button to select Off time/On time.
Press the G button and then D / E button to select On. • To cancel On/Off timer function, select Off.
: -- --
Press the G button and then D / E button to set the hour.
Press the G button and then D / E button to set the minutes.
:

AUTO SLEEP
If set to on and there is no input signal, the TV turns off automatically after 10 minutes.
Press the MENU button and then D / E button to select
the TIME menu.
Press the G button and then D / Ebutton to select Auto sleep.
Press the G button and then D / Ebutton to select On or Off.
You don’t have to remember to switch the set off before you go to sleep.
The sleep timer automatically switches the set to standby after the preset time has elapsed.
Press the SLEEP button repeatedly to select the number of minutes. The display ‘ - - - ’ will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.

CHILD LOCK
The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. This set is programmed to remember which option it was last set to even if you turn the set off.
Press the MENU button and then D / E button to select the SPECIAL menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off.
- In Child lock ‘On’, if the set is turned off, press the r / I, INPUT, PR D / E button on the set or
POWER, INPUT, TV, PR +/- or NUMBER buttons on the remote control. - With the Child lock On, the display ‘ Child lock on’ appears on the screen if any button on the
front panel is pressed while viewing the set.

ISM (Image Sticking Minimization) METHOD
A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remain- ing even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time.
It’s not available to use this function in LCD TV models.
White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash.
Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes.
This is the function to invert the panel color of the screen. The panel color is automatically inverted every 30 minutes.
Press the MENU button and then D / E button to select the SPECIAL menu.
Press the G button and then D / E button to select ISM Method.
Press the G button and then D / E button to select either Normal, White wash, Orbiter or Inversion. If you unnecessary to set this function, set Normal.

This is the function to reduce the power consumption of the set. It’s not available to use this function in LCD TV models
Press the MENU button and then D / E button to select the SPECIAL menu.
Press the G button and then D / E button to select Low power.
Press the G button and then D / E button to select On or Off.
Use it to see the difference between XD Demo on and XD Demo off. It’s not available to use this function in RGB[PC], HDMI[PC] mode.
Press the MENU button and then use D / E button to select the SPECIAL menu.
Press the G button and then use D / E button to select XD Demo.

XD™Off XD™On
Press the G button to begin XD Demo.
To stop XD Demo, press the MENU button.
* In ‘Child lock Off’, to stop ‘XD Demo’, press any button on the set.

AUTO CONFIGURE (RGB [PC] mode only)
LIST I/II MENU Automatically adjusts picture position and minimizes image shaking.
Although the image is still not correct, your set is functioning properly but needs further adjustment.
The Auto config. functions don’t need to be run for HDMI mode.
This function is for the automatic adjustment of the screen posi- tion, clock, and phase. The displayed image will unstable for a few seconds while the auto configuration is in progress.
Auto config. Manual config.
Reset 1
Press the MENU button and then use D / E button to select the SCREEN menu.
Press the G button and then use D / E button to select Auto config..
Auto config. G Manual config.
Press the G button to start Auto config..

If the picture isn’t clear after auto adjustment and espe- cially if characters are still trembling, adjust the picture phase manually.
To correct the screen size, adjust Clock.
This function works in the following mode : RGB[PC], RGB[DTV], COMPONENT (480p/576p/720p/1080i), HDMI/DVI mode.
It’s not available to use Phase, Clock function in RGB[DTV], COMPONENT (480p/576p/720p/1080i), HDMI/DVI mode.
It’s available to use H/V-Position in HDMI/DVI[DTV]
Clock This function is to minimize any vertical bars or stripes
Auto config. Manual config.
visible on the screen background. And the horizontal screen size will also change.
Phase This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
Press the MENU button and then use D / E button to
Auto config. Manual config. G
select the SCREEN menu.
Press the G button and then D / E button to select Manual config..
Press the G button and then D / E button to select Phase, Clock, H-Position or V-Position.
Press the F / G button to make appropriate
adjustments.

SETTING THE PICTURE FORMAT
VCR
TEXT PIP SIZE POSTION
PIP PRPIP PR+ SWAP PIP INPUT
You can watch the screen in various picture formats; Spectacle, Full (option), Original, 4:3, 16:9 (Wide), 14:9 and Zoom1or Zoom2.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
There might be uncomfortable in full mode. Then change into other mode. You can adjust the enlarge proportion using D / E button.
This function works in the following signal.
Press the MENU button and then use D / E button to select the SCREEN menu.
Press the G button and then use D / E button to select ARC.
Press the G button and then use D / E button to select Spectacle, Full(option), Original, 4:3, 16:9, 14:9,
Auto config. Manual config.
Zoom1 or Zoom2.
Auto config. Manual config.
4:3
16:9
14:9

G You can only select 4:3, 16:9
(Wide) in RGB[PC], HDMI[PC] mode only.
G You can only select 4:3, 16:9
(Wide) and Zoom1, Zoom2 in RGB[DTV], HDMI/DVI[DTV], Component mode only.
A Scroll function (Option)
Press the ARC button and then use D / E button to move screen.
E
Spectacle

LIST I/II MENU SELECTING WIDE VGA/XGA MODE
To see a normal picture, match the resolution of RGB mode and selection of VGA/XGA mode.
This function works in the following mode: RGB[PC] mode
Auto config. Manual config.
Press the MENU button and then use D / E button to select the SCREEN menu.
Press the G button and then use D / E button to select XGA Mode (or VGA Mode).
Press the G button and then use D / E button to select the desired VGA/XGA resolution.
Auto config. Manual config.
INITIALIZING (Reset to original factory settings)
This function operates in current mode. To initialize the adjusted value
Auto config. Manual config.
Press the MENU button and then D / E button to select the SCREEN menu.
Press the G button and then D / Ebutton to select Reset.
Press the G button.

EXTERNAL CONTROL DEVICE SETUP
Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor’s functions externally. Connect the serial port of the control device to the RS-232C jack on the Monitor back pane l.RS-232C connection cables are not supplied with the Monitor.



RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
PC TV
RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS
RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DTR DSR 6 4 DSR RTS 7 7 RTS CTS 8 8 CTS
D-Sub 9 D-Sub 9
D-Sub 9 D-Sub 9
Use this function to specify a set ID number. Refer to ‘Real Data Mapping 1’. See page 74.
Press the MENU button and then D / E button to select the SPECIAL menu.
Press the Gbutton and then use D / Ebutton to select Set ID.
Press the G button and then use F / G button to adjust Set ID to choose the desired monitor ID number.

COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2
[Command1][Command2][ ][Set ID][ ][Data][Cr] [Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based on this for- mat when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
[Command 2] : Second command to control the set.
number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63)
[Command2][ ][Set ID][ ][NG][Data][x]
on transmission/receiving protocol.
[DATA] : To transmit command data.
The TV transmits ACK (acknowledgement) based on this for- mat when receiving abnormal data from non-viable functions or communication errors.
Transmit ‘FF’ data to read status of comand.

To control Power On/Off of the TV.
To adjust volume. You can also adjust volume with the volume buttons on remote control.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
To show Power On/Off.
Refer to ‘Real data mapping 1 ’. See page 74
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement [f][ ][Set ID][ ][OK][Data][x]
Acknowledgement [a][ ][Set ID][ ][OK][Data][x]
* In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
To adjust screen contrast. You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
To adjust the screen format. (Main picture format) You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the SCREEN menu.
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [g][ ][Set ID][ ][OK][Data][x]
Transmission [k][c][ ][Set ID][ ][Data][Cr]
To adjust screen brightness. You can also adjust brightness in the PICTURE menu.
Date 1: Normal screen (4:3) Date 2: Wide screen (16:9) Date 3: Spectacle Date 4: Full screen (Zoom1)
Date 5: Full screen (Zoom2) Date 6: Original Date 7: Wide screen (14:9) Date 8: Full (Option)
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][OK][Data][x]
Acknowledgement [h][ ][Set ID][ ][OK][Data][x]
* Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
To adjust the screen colour. You can also adjust colour in the PICTURE menu.
To select screen mute on/off.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [i][ ][Set ID][ ][OK][Data][x]
Acknowledgement [d][ ][Set ID][ ][OK][Data][x]
To adjust the screen tint. You can also adjust tint in the PICTURE menu.
To control volume mute on/off. You can also adjust mute using the MUTE button on remote control.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [j][ ][Set ID][ ][OK][Data][x]
Acknowledgement [e][ ][Set ID][ ][OK][Data][x]

To adjust the screen sharpness.
To adjust balance.
You can also adjust sharpness in the PICTURE menu.
You can also adjust balance in the SOUND menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Refer to ‘Real data mapping 1’. See page 74
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [k][ ][Set ID][ ][OK][Data][x]
Acknowledgement [t][ ][Set ID][ ][OK][Data][x]
To select OSD (On Screen Display) on/off when con- trolling remotely.
To adjust color temperature.
You can also adjust CSM in the PICTURE menu.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Acknowledgement [u][ ][Set ID][ ][OK][Data][x]
Acknowledgement [l][ ][Set ID][ ][OK][Data][x]
To lock the remote control and the front panel
To adjust red in colour temperature.
controls on the set.
Transmission [k][v][ ][Set ID][ ][Data][Cr]
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Refer to ‘Real data mapping 2’. See page 74
Acknowledgement [v][ ][Set ID][ ][OK][Data][x]
Acknowledgement [m][ ][Set ID][ ][OK][Data][x]
If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.
To adjust red in colour temperature.
Transmission [k][w][ ][Set ID][ ][Data][Cr]
To control the PIP (Picture In picture)/DW.
Refer to ‘Real data mapping 2’. See page 74
You can also control the PIP/DW using the PIP but- ton on the remote control or in the PIP/DW menu.
Acknowledgement [w][ ][Set ID][ ][OK][Data][x]
Transmission [k][n][ ][Set ID][ ][Data][Cr]
Data 0:PIP/DW off Data 1: PIP Data2: DW1 Data3: DW2 Data5: POP
To adjust red in colour temperature.
Transmission [k][$][ ][Set ID][ ][Data][Cr]
Acknowledgement [n][ ][Set ID][ ][OK][Data][x]
Refer to ‘Real data mapping 2’. See page 74
Acknowledgement [$][ ][Set ID][ ][OK][Data][x]
To select sub picture position for PIP.
You can also adjust the sub picture position using
POSI-TION button on the remote control or in the PIP/DW menu.
Transmission [k][q][ ][Set ID][ ][Data][Cr]
Data 0: Right down on screen Data 1: Left down on screen Data 2: Left up on screen Data 3: Right up on screen
Acknowledgement [q][ ][Set ID][ ][OK][Data][x]

To recognize an abnormal state.
To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC) mode.
Transmission [k][z][ ][Set ID][ ][FF][ ][Cr]
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Acknowledgement [z][ ][Set ID][ ][OK][Data][x]
Data 0: Normal (Power on and signal exist) Data 1: No signal (Power on) Data 2: Turn the TV off by remote control Data 3: Turn the TV off by sleep time function Data 4: Turn the TV off by RS-232C function Data 5: 5V down Data 6: AC down Data 7: Turn the TV off by Fan Alarm function (option) Data 8: Turn the TV off by Off time function Data 9: Turn the TV off by Auto sleep function Data a: Turn the TV off by AV board detect * This function is “read only”.
Acknowledgement [u][ ][Set ID][ ][OK][Data][x]
To select a programme for the main picture.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
Refer to ‘Real data mapping 1’. See page 74
To control the ISM method. You can also adjust ISM Method in SPECIAL menu. This feature is not available for all models.
Acknowledgement [a][ ][Set ID][ ][OK][Data0][x]
* Real data mapping 1
* Real data mapping 2
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Acknowledgement [p][ ][Set ID][ ][OK][Data][x]
To reduce the power consumption of the monitor. You can also adjust Low Power in SPECIAL menu. This feature is not available for all models.
Transmission [j][q][ ][Set ID][ ][Data][ ][Cr]
Acknowledgement [q][ ][Set ID][ ][OK][Data][x]
To adjust orbiter operation time term. This feature is not available for all models.
Transmission [j][r][ ][Set ID][ ][Data][ ][Cr]
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [r][ ][Set ID][ ][OK][Data][x]
To adjust pixel number in orbiter function. This feature is not available for all models.
Transmission [j][s][ ][Set ID][ ][Data][Cr]
Refer to ‘Real data mapping 1’. See page 74
Acknowledgement [s][ ][Set ID][ ][OK][Data][x]
[ ][Data2][Cr]

To send IR remote key code.
To adjust input source for sub picture in PIP mode
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Transmission [x][y][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][OK][Data][x]
0
(Main Picture Input) To select input source for TV
External Input Input Number
Transmission [x][b][ ][Set ID][ ][Data][Cr]
0 0 0 1 Analog
MSB LSB
0
0 1 0 0 Component
External Input Input Number
1 0 0 1 HDMI
0 0 0 1 Analog
0 1 0 0 Component
0 Input1
0 0 0 1 Input2
0 0 1 0 Input3
0 0 1 1 Input4
Acknowledgement [y][ ][Set ID][ ][OK][Data][x]
0 Input1
0 0 0 1 Input2
0 0 1 0 Input3
0 0 1 1 Input4
Acknowledgement [b][ ][Set ID][ ][OK][Data][x]

IR CODES
1. How to Connect
Single pulse, modulated with 37.917KHz signal at 455KHz
FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3
Low custom code Lead code
High custom code Data code Data code
C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
4.5 ms 9 ms
0.55 ms
2.25 ms 9 ms
Bit ”0” Bit ”1”
0.56 ms
0.56 ms
1.12 ms
2.24 ms
The waveform is transmitted as long as a key is depressed.

Code Function Note (Hexa)
Code Function Note (Hexa)
0F TV R/C Button
72 RED R/C Button
0B INPUT R/C Button
71 GREEN R/C Button
08 POWER R/C Button (Power On/Off)
63 YELLOW R/C Button
C4 POWER ON Discrete IR Code (Only Power On)
61 BLUE R/C Button
C5 POWER OFF Discrete IR Code (Only Power OFF)
02 VOL + R/C Button
60 PIP R/C Button
03 VOL - R/C Button
0E SLEEP R/C Button
00 PR + R/C Button
20 TEXT R/C Button
01 PR - R/C Button
0A I/II R/C Button
09 MUTE R/C Button
43 MENU R/C Button
53 LIST R/C Button
79 ARC R/C Button
10 ~ 19 Number Key 0 ~ 9 R/C Button
5B EXIT R/C Button
1E FAVOURITE R/C Button
07 F R/C Button
1A Q.VIEW R/C Button
06 G R/C Button
64 SIZE R/C Button
40 D R/C Button
41 E R/C Button
44 OK R/C Button
70 INDEX R/C Button
72 PIP PR- R/C Button
26 TIME R/C Button
71 PIP PR+ R/C Button
2A REVEAL R/C Button
63 SWAP R/C Button
E0 + R/C Button
61 PIP INPUT R/C Button
E1 - R/C Button

PROGRAMMING THE REMOTE
The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-control- lable devices of other manufacturers. Note that the remote may not control all models of other brands.
Test your remote control. To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding mode button (such as a DVD or VCR) on the remote control, while pointing at the component. Test the POWER and PR +/- buttons to see if the com- ponent responds properly. If not, the remote requires programming to operate the device.
Turn on the component to be programmed, then press the corresponding mode button (such as a DVD or VCR) on the remote control. The remote control button of desired device is lighted.
Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed for the code.
Enter a code number using the NUMBER buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off.
Press the MENU button to store the code.
Test the remote control functions to see if the component responds properly. If not, repeat from step 2.

VCRs
Brand Codes Brand Codes Brand Codes
AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 DAYTRON 108 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME 059 EMERSON 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 FISHER 003 008 009 010 FUNAI 034 GE 031 033 063 072 107 109 144 147 GO VIDEO 132 136 HARMAN KARDON 012 045 HITACHI 004 018 026 034 043 063 137 150 INSTANTREPLAY 031 033 JCL 031 033 JCPENNY 012 013 015 033 040 066 101 JENSEN 043 JVC 012 031 033 043 048 050 055 060 130 150 152 KENWOOD 014 034 039 043 047 048 LG (GOLDSTAR) 001 012 013 020 101 106 114 123 LLOYD 034 LXI 003 009 013 014 017 034 101 106 MAGIN 040
MAGNAVOX 031 033 034 041 067 068 MARANTZ 012 031 033 067 069 MARTA 101 MATSUI 027 030 MEI 031 033 MEMOREX 003 010 014 031 033 034 053 072 101 102 134 139 MGA 045 046 059 MINOLTA 013 020 MITSUBISHI 013 020 045 046 049 051 059 061 151 MTC 034 040 MULTITECH 024 034 NEC 012 023 039 043 048 NORDMENDE 043 OPTONICA 053 054 PANASONIC 066 070 074 083 133 140 145
SAMSUNG 032 040 102 104 105 107 109 112 113 115 120 122 125 SANSUI 022 043 048 135 SANYO 003 007 010 014 102 134 SCOTT 017 037 112 129 131 SEARS 003 008 009 010 013 014 017 020 031 042 073 081 101 SHARP 031 054 149 SHINTOM 024 SONY 003 009 031 052 056 057 058 076 077 078 149 SOUNDESIGN 034 STS 013 SYLVANIA 031 033 034 059 067 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 TEAC 034 039 043 TECHNICS 031 033 070 TEKNIKA 019 031 033 034 101 THOMAS 034 TMK 006 TOSHIBA 008 013 042 047 059 082 112 131 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC 040 WARDS 003 013 017 024 031 033 034 040 053 054 131 YAMAHA 012 034 039 043 ZENITH 034 048 056 058 072 080 101
PENTAX 013 020 031 033 063 PHILCO 031 034 067 PHILIPS 031 033 034 054 067 071 101 PILOT 101 PIONEER 013 021 048 PORTLAND 108 PULSAR 072 QUARTZ 011 014 QUASAR 033 066 075 145 RCA 013 020 033 034 040 041 062 063 107 109 140 144 145 147 REALISTIC 003 008 010 014 031 033 034 040 053 054 101 RICO 058 RUNCO 148 SALORA 014

PROGRAMMING CODE
Brand Codes Brand Codes Brand Codes DVD
APEX DIGITAL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNAVOX 013 MARANTZ 024
MITSUBISHI 002 NAD 023 ONKYO 008 017 PANASONIC 003 009 PHILIPS 013 PIONEER 004 026 PROCEED 021 PROSCAN 005 006
RCA 005 006 SAMSUNG 011 015 SONY 007 THOMPSON 005 006 TOSHIBA 019 008 YAMAHA 009 018 ZENITH 010 016 025

The operation does not work normally.
causing obstruction.
The video function does not work.
where the product’s power cord was plugged in.
ly after switching on
contact your service center, if the picture has not appeared after five minutes.
No or poor color
Horizontal/vertical bars or picture shaking
Lines or streaks in

TROUBLESHOOTING CHECKLIST
The audio function does not work.
No output from one
when the product is turned on or off and does not indicate a fault with the product.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of
range.
Vertical bar or stripe on back- ground & Horizontal
Screen colour is unstable or single

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

PRODUCT SPECIFICATIONS
37LC2R *
42LC2R *
MODELS
32LC2R -TH
37LC2R -TH
42LC2R -TH
811 x 630 x 235 mm
944 x 729 x 286 mm
1054 x 813 x286 mm
Dimensions (Width x Height x Depth)
31.9 x 24.8 x 9.2inches
37.1 x 28.7 x 11.2 inches
41.4 x 32x 11.2 inches
811 x 566.8x 123.5 mm
944 x 659.3 x 129.7 mm
1054 x 746 x 136.8mm
37.1 x 26 x 5.1 inches
41.4 x 29.3 x 5.3 inches
31.9 x 22.3 x 4.8 inches
including stand excluding stand
26.3 kg/57.9 lbs
35.5 kg/78.2 lbs
42.3kg/93.2 lbs 35.7kg/78.7 lbs
22.9 kg/50.4 lbs
30.9 kg /68.1 lbs
Power requirement Television System External Antenna Impedance
AC100-240V- 50/60Hz PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Operating Temperature Operating Humidity
0 ~ 40°C/32 ~ 104°F Less than 80%
Storage Temperature Storage Humidity
42PC1R *
50PC1R *
50PC3R *
MODELS
42PC1R -TH
50PC1R -TH
50PC3R -TH
1129.0 x 748.5 x 380.0 mm
1302.6 x 872 x 355.8 mm
1302.6 x 872 x 355.8 mm
Dimensions (Width x Height x Depth)
44.4 x 29.4 x 14.9 inches
51.2 x 34.3 x 14 inches
51.2 x 34.3 x 14 inches
1129.0 x 695.0 x 103.7 mm
1302.6 x 810x 108.7 mm
1302.6 x 810x 107.7 mm
44.4 x 27.3 x 4 inches
51.2 x 31.8 x 4.2 inches
51.2 x 31.8 x 4.2 inches
including stand excluding stand
29.3 kg/64.6 lbs
51.4 kg / 113.3 lbs
51.9 kg/133.1 lbs
25.4 kg/56.0 lbs
44.3 kg / 97.7 lbs
44.7 kg / 98.7 lbs
Power requirement Television System External Antenna Impedance
AC100-240V- 50/60Hz PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Operating Temperature Operating Humidity
0 ~ 40°C/32 ~ 104°F Less than 80%
Storage Temperature Storage Humidity

37LB1R *
42LB1R *
MODELS
32LB1R -TH
37LB1R -TH
42LB1R -TH
911.4 x 599 x 259 mm
1045.8x 693.8x 260.4 mm
1175 x 768x300 mm
Dimensions (Width x Height x Depth)
35.8 x 23.5 x 10 inches
41.1 x 27.2 x 10.2 inches
46.2 x 30.2 x 11.8 inches
911.4 x 511.5x 124.2mm
1045.8x 594.4x 133mm
1175 x 670x 143.8mm
35.8 x 20.1 x 4.8 inches
41.1 x 23.4 x 5.2 inches
46.2 x 26.3 x 5.6 inches
31.6kg/69.6 lbs
41.4kg/91.2 lbs
including stand excluding stand
22.6 kg/49.8 lbs
17.8 kg/39.2 lbs
25.3 kg/55.7 lbs
33.9kg/74.7 lbs
Power requirement Television System External Antenna Impedance
AC100-240V- 50/60Hz PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Operating Temperature Operating Humidity
0 ~ 40°C/32 ~ 104°F Less than 80%
Storage Temperature Storage Humidity
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.