
37LB5D / 42LB5D / 47LB5D 52LB5D 32LB4D / 37LB4D / 42LB4D
Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA).
As an ENERGY STAR Partner LGE U.S.A., Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

TruSurround XT Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.
is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
LG TV with this logo displays Full HD(high-defini- tion) 1080p native resolution by receiving and pro- cessing a Full HD 1080p signal.
High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions.
LG TV with this logo can play MP3 music from a MP3 player, such as iPOD, and JPEG images from a digital camera through the USB device.
With HDMI CEC support of LG’s audio/video device connected to the HDMI (high-definition multimedia interface), LG TV with this logo works easily with one remote control.
LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors.
It has three HDMI ports that connect audio and video devices with one cable and produces the high- est quality digital images and sound.
TruSurround XT

WARNING / CAUTION
To prevent fire or shock hazards, do not expose this product to rain or moisture.
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO
Class B digital device This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre- quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi- sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of elec- tric shock to persons.
The exclamation point within an equi- lateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruc- tions in the literature accompanying the appliance.
and receiver. - Connect the equipment to an outlet on a circuit
different from that to which the receiver is con- nected. - Consult the dealer or an experienced radio/TV
technician for help.
TO REDUCE THE RISK OF FIRE AND ELEC- TRIC SHOCK, DO NOT EXPOSE THIS PRO- DUCT TO RAIN OR MOISTURE.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAUTION
This reminder is provided to call the CATV sys- tem installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code pro- vides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product

IMPORTANT SAFETY INSTRUCTIONS
Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction:
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Do not use this apparatus near water.
Clean only with dry cloth.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Only use attachments/accessories specified by the manufacturer.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.
Owner Manual Owner Manual
Unplug this apparatus when unused for long periods of time.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
Never touch this apparatus or antenna during a thunder or lighting storm.
Outdoor use marking : WARNING - To reduce the risk of fire or elec- tric shock, do not expose this appliance to rain or moisture.
Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. (You may be injured or the product can be damaged.)
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus.
GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
CAUTION concerning the Power Cord : Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates dam- age or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable.
Power Supply · Short-circuit · Breaker


160° - Wide angle range of vision Your flat panel plasma screen offers an exceptionally broad viewing angle of over 160 degrees. This means that the display is clear and visible to viewers any- where in the room.
On Disposal a. The fluorescent lamp used in this product con-
tains a small amount of mercury. b. Do not dispose of this product with general
household waste. c. Disposal of this product must be carried out in
Wide Screen The wide screen offers a theater-like experience in your own home.
accordance to the regulations of your local authority.
Multimedia Connect your plasma display to a PC and use it for conferencing, games, and Internet browsing. The Picture-in-Picture feature allows you to view your PC and video images simultaneously.
Versatile The light weight and thin size makes it easy to install your TV display in a variety of locations where con- ventional TVs do not fit.
The TV Manufacturing Process: a few minute colored dots may be present on the TV screen The TV is composed of 0.9 to 2.2 million cells. A few cell defects will normally occur in the TV manu- facturing process. Several tiny, minute colored dots visible on the screen should be acceptable. This also occurs in other Plasma TV manufacturers' products. The tiny dots appearing does not mean that this TV is defective. Thus a few cell defects are not sufficient cause for the TV to be exchanged or returned. Our production technology minimizes these cell defects during the manufacture and operation of this prod- uct.
I If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on. This is normal,
there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the moni- tor's performance. Avoid touching the LCD screen or holding your fin- ger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

ACCESSORIES
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product.
1.5V 1.5V
LCD TV PLASMA TV
BACK BACK
Copyright© 2007 LGE, All Rights Reserved.

I Slightly wipe stained spot on the exterior only with the polishing
cloth for the product exterior if there is stain or fingerprint on
I Do not wipe roughly when removing stain. Please be cautions of
that excessive power may cause scratch or discoloration. Polishing Cloth

75ΩRound Cable
2- TV Bracket Bolts 2- TV Brackets, 2- Wall Brackets
Twist Holder Arrange the wires with the twist holder.
4-bolts for stand assembly Refer to p. 13

FRONT PANEL CONTROLS
I Here shown may be somewhat different from your TV.
I If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a
polishing cloth is included with your product, use it).
CH
CHANNEL (E,D) Buttons
VOLUME (F,G) Buttons
ENTER
INPUT
R
/I
Intelligent Eye Adjusts picture according to the surrounding con- ditions.

37/42/47/52LB5D
CHANNEL (E,D) Buttons
VOLUME (F,G) Buttons
ENTER
INPUT
/I
Intelligent Eye Adjusts picture according to the surrounding con- ditions.

BACK PANEL INFORMATION
I Here shown may be somewhat different from your TV.
32/37/42LB4D

L/L/MONO MONO R AUDIO AUDIO VIDEO VIDEO USB IN USB IN
S-VIDEO Input Connect S-Video out from an S-VIDEO device.
L/L/MONO MONO R AUDIO AUDIO VIDEO VIDEO
AUDIO/VIDEO Input Connect audio/video out- put from an external device to these jacks.

S-VIDEO Input Connect S-Video out from an S- VIDEO device.
AUDIO/VIDEO Input Connect audio/video output from an external device to these jacks. AV IN 2
37/42 inches · USB Input · USB Input


device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device.
HDMI/DVI IN Connect a HDMI signal to 1, 2 or 3. Or DVI (VIDEO)signal to the 1, 2 or 3 port with a DVI to HDMI cable.
AUDIO OUT Connect analog audio to various types of equipment.
COMPONENT IN Connect a component video/audio device to these jacks.
DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Note: In standby mode, these ports do not work.
RGB(PC) AUDIO (RGB/DVI) Connect the monitor output from a PC to the appropriate input port.
ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack.
RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.
REMOTE CONTROL PORT Connect your wired remote control.
Power Cord Socket For operation with AC power. Caution : Never attempt to operate the TV on DC power.
AV (Audio/Video) IN 1 Connect audio/video output from an external

ATTACHING THE TV TO A WALL
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.
I Here shown may be somewhat different from your TV.


I Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
*Insert the eye-bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately ) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely.

I Use a sturdy rope (not provided as parts of the
product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage.

Assemble the product stand with the product as shown.

Install the 4 bolts securely, in the back of the product in the holes provided.

BACK COVER FOR WIRE ARRANGEMENT
I Here shown may be somewhat different from your TV.
32/37/42LB4D

To connect an additional equipment, see the External Equipment Setup section.
Hold the CABLE MANAGEMENT with both hands and pull it upward.
G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.

I Here shown may be somewhat different from your TV.
PREPARATION

To connect an additional equipment, see the External Equipment Setup section.
Hold the CABLE MANAGEMENT with both hands and pull it upward.
G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.

DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4 in. on each side and the top, 2.36 in. on the bottom, and 4 in. from the wall.
37/42/47/52LB5D 32/37/42LB4D

This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket.
37/42/47/52LB5D 37/42LB4D


G Screw length needed depends on the wall mount used. For further information, refer to the VESA


Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direc- tion if needed.
Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)
Be careful not to bend the bronze wire when connecting the antenna.

I To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
I If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
I If the antenna is not installed properly, contact your dealer for assistance.
The TV will let you know when the analog, cable, and digital channel scans are complete. NOTE

HD RECEIVER SETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents.
When connecting Component cable
1. How to connect

Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red).
Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO 1 jacks on the set.
(Refer to the owner’s manual for the digital set-top box.)
I Select COMPONENT 1 input source with using the INPUT
button on the remote control.
I If connected to COMPONENT IN 2 input, select COMPO-
NENT 2 input source.



Connect the RGB output of the digital set-top box to the RGB (PC) jack on the set.
Connect the audio outputs of the set-top box to the AUDIO (RGB/DVI) jack on the set.
I Select RGB-PC input source with using the INPUT button
1. How to connect


Connect the digital set-top box to HDMI/DVI IN1, 2 or 3 jack on the set.
I Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
I Select HDMI1, HDMI2 or HDMI3 input source with using
the INPUT button on the remote control.
I If the digital set-top box player does not support Auto HDMI,
you need to set the output resolution appropriately.

When connecting HDMI to DVI cable

1. How to connect

Connect the DVI output of the digital set-top box to the HDMI/DVI IN1, 2 or 3 jack on the set.
Connect the audio output of the digital set-top box to the AUDIO(RGB/DVI) jack on the set.
I Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
I Select HDMI1, HDMI2 or HDMI3 input source with using the INPUT button on the remote control.

When connecting Component cable
1. How to connect

Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red).
Connect the audio outputs of the DVD to the COMPONENT IN AUDIO1 jacks on the set.
I Turn on the DVD player, insert a DVD.
I Select COMPONENT 1 input source with using the
I If connected to COMPONENT IN 2 input, select COM-
PONENT 2 input source.
I Refer to the DVD player's manual for operating instruc-
tions.
Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below.


EXTERNAL EQUIPMENT SETUP
When connecting with an S-Video cable
1. How to connect

AUDIO Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set.
Connect the audio outputs of the DVD to the AUDIO input jacks on the set.
I Turn on the DVD player, insert a DVD.
I Select AV1 input source with using the INPUT button on
I If connected to AV IN 2, select AV2 input source.
I Refer to the DVD player's manual for operating instructions.


Connect the HDMI output of the DVD to the HDMI/DVI IN1, 2 or 3 jack on the set.
I Select HDMI1, HDMI2 or HDMI3 input source with using
the INPUT button on the remote control.
I Refer to the DVD player's manual for operating instruc-
tions.
I If the DVD does not support Auto HDMI, you need to set
the output resolution appropriately.

I To avoid picture noise (interference), leave an adequate distance between the VCR and TV
I If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible
on the screen.
When connecting with an antenna
i.e) 37/42/47/52 inches


Connect the RF antenna out socket of the VCR to the Antenna socket on the set.
Connect the antenna cable to the RF antenna in socket of the VCR.
I Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)


Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors(Video = yellow, Audio Left = white,and Audio Right = red)
I Insert a video tape into the VCR and press PLAY on the
I Select AV1 input source with using the INPUT button on
I If connected to AV IN 2, select AV2 input source.
If you have a mono VCR, con- nect the audio cable from the VCR to the AUDIO L/MONO jack of the set.

Connect the S-VIDEO output of the VCR to the S- VIDEO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input.
Connect the audio outputs of the VCR to the AUDIO input jacks on the set.
I Insert a video tape into the VCR and press PLAY on the VCR.
I Select AV1 input source with using the INPUT button on the
In the event that you connect both Video and the S-Video cables, only the S-Video will work.
I If connected to AV IN 2, select AV2 input source.

32 inches 37/42/47/52 inches

Video Game Set
Video Game Set
1. How to connect

Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red)
I Select AV2 input source with using the INPUT button on
the remote control.
I If connected to AV IN 1 input, select AV1 input source.
I Operate the corresponding external equipment.

PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting D-sub 15 pin cable
1. How to connect
Connect the RGB output of the PC to the RGB (PC) jack on the set.
Connect the PC audio output to the AUDIO (RGB/DVI) jack on the set.
I Turn on the PC and the set.
I Select RGB-PC input source with using the INPUT button
on the remote control.
G Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.


1. How to connect

Connect the DVI output of the PC to the HDMI/DVI IN1, 2 ou 3 jack on the set. (Use the HDMI to DVI cable)
Connect the PC audio output to the AUDIO(RGB/DVI) jack on the set.
I Turn on the PC and the set
I Select HDMI1, HDMI2 or HDMI3 input source with using the INPUT button on the remote control.

G If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.
G If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the
best picture quality, adjust the output resolution of PC graphics card's output resolution to 1920x1080, 60Hz.(32/37/42LB4D models: 1360x768, 60Hz)

G Depending on the graphics card, DOS mode may
G Avoid keeping a fixed image on the screen for a
not work if a HDMI to DVI Cable is in use.
long period of time. The fixed image may become permanently imprinted on the screen.
G Check the image on your TV. There may be noise
associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolu- tion, change the refresh rate to another rate or adjust the brightness and contrast on the PIC- TURE menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manu- facturer of the PC graphic card.
G The synchronization input form for Horizontal and
Vertical frequencies is separate.

Supported Display Specifications (RGB/HDMI-PC)
Supported Display Specifications (HDMI-DTV)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
31.468 70.09
31.47 60.00 31.47 59.94
31.469 70.08
45.00 60.00 44.96 59.94
31.469 59.94 37.861 72.80 37.500 75.00
33.75 60.00 33.72 59.94 67.50 60.00 67.432 59.939 27.00 24.00 26.97 23.94 33.75 30.00 33.71 29.97
35.156 56.25 37.879 60.31 48.077 72.18 46.875 75.00
48.363 60.00 56.476 70.06 60.023 75.02
1280x768 Supported Display Specifications (Y, CB /PB,CR /PR)
47.776 59.870 60.289 74.893
Horizontal Vertical Frequency(KHz) Frequency(Hz)
47.712 60.015
15.73 60.00 15.73 59.94 31.47 59.94 31.47 60.00
63.981 60.020 79.976 75.025
75.00 60.00
45.00 60.00 44.96 59.94
67.50 60.00
33.75 60.00 37.72 59.94 67.50 60.00 67.432 59.939 27.00 24.00 26.97 23.94 33.75 30.00 33.71 29.97

Screen Setup for PC mode
Overview
When the RGB input, of the set is connected to a PC Output, Select RGB-PC with using the INPUT button on the remote control.
When you change the resolution, select the proper resolution in present input to see the best picture appearance.

Press the MENU button and then use D or E button to select the PICTURE menu.
Press the G button and then use D or E button to select Screen.
Press the G button to enter the screen adjustment menu.

Selection ( G or ) leads you to the screen adjustment menu.

Use D or E button to select Resolution, Position, Size, or Phase.

Press the ENTER button and then use D / E or F / G button to make appropriate adjustments.
I The Phase adjustment range is -16 ~ +16.
I The Size adjustment range is -30 ~ +30.
Resolution XGA(1024, 1280, 1360) isn’t
Press the ENTER button.
distinguished because of having the same H/V Sync Time. This function is you to select the Default Sync Time. Position This function is to adjust picture
to left/right and up/down as you prefer. Size This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of char- acters.
To initialize the adjusted values.

Use D or E button to select Reset.
Press the ENTER button and then use F or G button to select Yes.
Initialize Settings.
Press the ENTER button.

USB IN SETUP
The TV has a special signal output capability which allows you to hook up the second TV or monitor.
32 inches 37/42/47/52 inches


L/L/MONO MONO R AUDIO AUDIO VIDEO VIDEO USB IN USB IN
L/L/MONO MONO R AUDIO AUDIO VIDEO VIDEO

Connect the USB device to the USB IN jacks on the side of TV.
I After connecting the USB IN jacks, you use the
function. (G p.47) MEDIA MEDIAHOST HOST

Send the TV’s audio to external audio equipment via the Audio Output port.
Analog
EXTERNAL EQUIPMENT SETUP
Connect audio outputs to the TV’s AUDIO OUT jacks.
Set the “TV Speaker option - Off” in the AUDIO menu. (G p.70). See the external audio equipment instruction manual for operation.
Connect one end of the optical or coaxial cable to the TV’s OPTICAL or COAXIAL port of DIGITAL AUDIO OUT.
Connect the other end of the optical or coaxial cable to the digital audio input on the audio equipment.
Set the “TV Speaker option - Off” in the AUDIO menu. (G p.70). See the external audio equipment instruction manual for operation.
G When connecting with external audio equipment, such as
amplifers or speakers, please turn the TV speakers off. (G p.70)
G Do not look into the optical output port. Looking at the
laser beam may damage your vision.
G Block the SPDIF out(optical/coaxial) about the contents
with ACP(Audio Copy Protection) function.

REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.

I It turns to the default settings brightness by changing
I Navigate the on-screen menus and adjust the system
Clear all on-screen displays and return to TV viewing from any menu.
Select the amount of time before your TV turns off auto- matically.G p.80
See a list of AV devices connected to TV.
When you toggle this button, the SimpLink menu appears at the screen.
Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.

Turns your TV or any other programmed equipment on or off, depending on the mode.
In AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2 and HDMI3 input sources, screen returns to the last TV channel.
INPUT
External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 (Antenna, Cable, AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 input sources are linked automatically, only if these are connected ).
MODE
Select the remote operating mode: TV, DVD, VCR, AUDIO, CABLE or STB. * If the mode of another product is selected, a button on the remote control which is not used for the selected product can control the TV.
Enter to the mode. MEDIA MEDIAHOST HOST
Adjust the factory preset picture depend on the viewing environment.G p. 55
SOUND
Select the appropriate type of sound for
type of program.G p. 65
SAP
Select MTS sound: Mono, Stereo, and SAP analog mode. Change the audio language DTV mode. G p. 69
Select the Caption On/Off. G p.73
Enter the selected functions. G p.49
Remove the USB device. G p.32
Installing Batteries
R
IOpen the battery compartment cover on the
LIVE TV INPUT
back side and install the batteries matching cor- rect polarity (+with +,-with -).
MODE
DAY -
DAY +
DAY -
DAY +
IUse a remote control up to 7 meters distance and 30
IInstall two 1.5V AA batteries. Don’t mix old or
degree (left/right) within the receiving unit scope.
used batteries with new ones.
IDispose of used batteries in a recycle bin to pre-
IClose cover.
serve environment.

TURNING ON TV

First, connect power cord correctly. At this moment, the TV switches to standby mode.
I In standby mode, press the (or ON/OFF), INPUT, CH (D or E) button on the TV or press the POWER, INPUT, TV INPUT, CH(D or E), Number (0~9) but- ton on the remote control.

PICTURE PICTURE PICTURE SOUND SOUND SAP SAP CC CC
Select the viewing source by using the INPUT button on the remote control.
I This TV is programmed to remember which mode it was
last set to, even if you turn the TV off.
When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.

G If you intend to be away on vacation, disconnect

Press the CH D or E or NUMBER buttons to select a channel number.
PICTURE PICTURE PICTURE SOUND SOUND SAP SAP CC CC

VOLUME ADJUSTMENT

Adjust the volume to suit your personal preference.

Press the VOL D or E button to adjust the volume.
If you want to switch the sound off, press the MUTE but- ton.
You can cancel the Mute function by pressing the MUTEor VOL D or E button.

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Press the MENU button and then use D or E button to select each menu.
Press the G button and then use D E F G button to display the available menus.
SETUP PICTURE

AUDIO
For USA For Canada


TV Rating-French Input Block
TIME




Auto Scan(Auto Tuning)
Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned on.

Press the MENU button and then use D or E but- ton to select the SETUP menu.
Press the G button and then use D or E button to select Auto Tuning.
Press the ENTER button to begin the channel search. Allow Auto Tuning to complete the channel search cycle for ANTENNA and CABLE.
Selection ( G or ) leads you to the Auto Tuning screen.

Selection ( G or ) leads you to the Auto Tuning screen.
Press to stop the current scan and start ANALOG ANTENNA channel scan.
Analog TV antenna Digital DTV antenna Analog CATV cable Digital CADTV cable


A password is required to gain access to Manual Tuning menu if the Lock System is turned on.
If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received.

Press the MENU button and then use D or E button to select the SETUP menu.
Press the G button and then use D or E button to select Manual Tuning.
Press the G button and then use D or E button to select DTV, TV, CADTV, and CATV.
Press the G button and then use D or E button to select channel number you want to add or delete.
Press the ENTER button to add or delete for the channel number.


Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
G This digital channel number is a physical channel
number, which is different from the normal channel number shown in Channel Edit.


From the default channel list created from the Auto Tuning channel search, you can create two different types of channel lists in memory: “custom list” and “favorite channel list”. A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are dis- played in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-left corner of the screen. You can create your own Favorite List. Use the FAV button on the remote control when a channel is highlighted and then add or delete the channel to/from your Favorite List.
Press the MENU button and then use D or E button to select the SETUP menu.
Press the G button and then use D or E button to select Channel Edit.
Press the G button. You will now see a screen filled with channel numbers and a preview picture.
Use D E F G button to select a channel and then use the ENTER button to add or delete it. Press FAV button to add the channel to the Favorite List. The surfing icon will appear in front of that channel number.
Channel Edit G Selection ( G or ) leads you to the channel edit screen. 4
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

INPUT
AV 2 Press theINPUT button to display external device that is connected to the unit, on screen. Press the ENTER button to change the input to the active external device. Use the D or E button to select the input source.

AV 2
E
WATCHING TV / CHANNEL CONTROL
If all external input sources are connected:
HDMI3
HDMI2 HDMI1 RGB-PC Component2
If no external input sources are not connected:
If there is any external input source connected: (ex: When connected only to AV 2)
Antenna : Select it when watching the DTV/TV. Cable: Select it when watching the CADTV/CATV. AV 1, AV 2 : Select it when watching the VCR or external equipment. Component 1-2 : Select it when using the DVD or the Digital set-top box depend on connector. RGB-PC : Select it when using PC depend on connector. HDMI, HDMI2, HDMI3 : Select it when using DVD, PC or Digital set-top box depend on connector.


This operates only for the devices with the
logo. Please check the logo.
This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
SimpLink Preparations
Connect the HDMI/DVI IN 1, 2 or 3 terminal of the TV to the rear terminal (HDMI output) of the SimpLink device with the HDMI cable. After connecting the HDMI jack for the home theater with simpLink function in the above method, connect the DIGITAL AUDIO OUT OPTICAL on the back of the TV to the DIGITAL AUDIO OUT terminal on the back of the simpLink device with the Optical cable.
Press the MENU button and then use D or E button to select the OPTION menu.
Press the G button and then use D or E button to select SimpLink.
Press the G button and then use D or E button to select On .
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

G When operating the external device with SimpLink, press the TV button among the MODE button on
G When you switch the Input source with the INPUT button on the remote control, you can stop the
G When you select or operate the media device with home theater function, the speaker automatically
G When you execute ‘Photo List, Music List ’function during DVD playback included in home theater sup-
ported the SimpLink stops and the applicable function is executed after switching the input to TV.

Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings.
Select AV device Enables you to select one of AV devices connected to TV and play it.
Disc playback Control connected AV devices by pressing the ,
DEF G, ENTER buttons and buttons for play, pause, stop, fast reverse, fast forward, chapter skip.
Power off all devices When you power off TV, all connected devices are turned off.
Switch audio-out Offers an easy way to switch audio-out.
(A device, which is connected to TV through HDMI cable but does not support Simplink, does not provide this function)
After selecting the TV button of the MODE on the remote control, press the SIMPLINK button.


Use D E F G button to select the desired device and then press the ENTER button.
Control connected AV devices by pressing the , , ,
, DEF G, ENTER buttons.
TV viewing : Switch to the previous TV channel regardless of the current mode.
DISC playback : Select and play discs. When multiple discs are available, the titles of the discs are conveniently dis- played at the bottom of the screen.
G When no device is
VCR playback : Play and control the connected VCR.
connected (displayed in gray)
HDD Recordings playback : Play and control recordings stored in HDD.
G When a device is
connected (displayed in bright color)
Audio Out to HT speaker/Audio Out to TV : Select HT speaker or TV speaker for Audio Out.
G Selected Device


Sets a label to each input source which is not in use when you press INPUT button.
Press the MENU button and then use D or E but- ton to select the OPTION menu.

Press the G button and then use D or E button to select Input Label.
Press the G button and then use D or E button to select the source: AV1, AV2, Component1, Component2, RGB-PC, HDMI1, HDMI2 or HDMI3.
Press the F or G button to select the label.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

ENTRY MODES

When you connect a USB device or press the button, this screen is displayed, automatically.
In USB device, you can not add a new folder or delete the existing folder.
Press the D or E button to select the desired item.
Press the ENTER button to move to Photo List or Music List of USB device.
MEDIA HOST
PICTURE PICTURE SOUND SOUND SAP SAP
Press the USB EJECT button of remote control before removing the USB device.
NOTE
Press the USB EJECT button of remote control before removing the USB device. Only a USB storage device is recognizable. If the USB storage device is connected through a USB hub, the device is not recognizable. A USB storage device using an automatic recognition program may not be recognized. A USB storage device which uses its own driver may not be recognized. In case of a card reader, up to four memory cards are concurrently recognizable. The recognition speed of a USB storage device may depend on each device. Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. To unplug the USB storage device, please press the USB EJECT button on the remote control, and then unplug it safely. Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files. Please use only a USB storage device which was formatted as a FAT or a NTFS file system pro- vided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized. In case of a hard disk drive (HDD) formatted as NTFS, writing and deletion are not allowable. Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recog- nized. Some USB storage devices may not be supported or operated smoothly. If the name of a folder or file is too long, it will not be displayed or recognized.
[Media Host Menu]

PHOTO LIST
It’s available to playback the photo file(*.jpg) in the USB device.
The On Screen Display may be different from your set. Images are an example to assist with the TV operation.


Current page/Total pages Total number of marked thumbnail photos Corresponding buttons on the remote control
Usable USB memory

As shown, up to 15 thumbnail photos are listed per page.
Use the CH D or E button to navigate in the thumbnail photo page.
Use the MARK button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all pho- tos in the folder in a slide show.

Use D E F G button to navigate the appropriate thumb- nail photos, then press the ENTER button to show the PopUp menu.
View : Display the selected item. Mark All : Mark all photos on the screen. Delete : Delete the selected photo item. Cancel : Close the pop-up menu.
Repeatedly, press EXIT button to return to TV viewing or press the button to return to the Media Host menu.

Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen.
Use the CH D or E button to navigate the thumbnail photo page. 1
2 Use D E F G button to navigate the appropriate thumb- nail photos, then press the ENTER button to show the PopUp menu.
Use D E button to Move to the View menu, then press the ENTER button.
The selected photo is displayed in full size.

Slide Show : When no picture is selected, all photos in the current folder are displayed during slide show. When selected, the selected photos are displayed during slide show. To start slide show, press ENTER button on .
I Set the time interval of the slide show in Option.
I A slide show continues for a maximum of 4 hours.
After 4 hours, the slide show will end and go to TV mode or external input mode. BGM : Listen to music while viewing photos in full size. To start BGM, press ENTER button on .
The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.
I Set the BGM device and album in Option .
(Rotate) : Rotate photos.

I Rotates the photo 90°, 180°, 270°, 360° clock-
wise upon ENTER button on (Rotate). Delete : Delete photos. UseF or G button to select Delete and press ENTER button.

Option : Set values for Slide Speed and Music folder. Use F or Gbutton to select Option and press ENTER button.

I Use F or G button and ENTER button to set val- ues. Then go to and press ENTER to save the settings.
I You cannot change Music Folder while BGM is playing.
F or G button to select Hide and press ENTER button.
I To see the menu again on the full-sized screen, press ENTER button to display.
Use D E F G button to select the previous or next photo.
Use D E F G button to select and control the menu on the full-sized screen.
Use EXIT button to go back to the photo list from the full- sized screen.
Repeatedly, press EXIT button to return to TV viewing or press button to return to the Media Host menu.


Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit.
The On Screen Display may be different from your set. Images are an example to assist with the TV operation.
Current page/Total pages Total number of marked musics Current playing time/Total play- ing time Corresponding buttons on the remote control


As shown , up to 8 music titles are listed per page.
Use the CH D or E button to navigate in the music titles page.
Use MARK button to mark or unmark a music. When one or more music files are marked, the marked musics will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence.

Use D E button to navigate the appropriate musics, then press the ENTER button to show up the pop-up menu.
Play (During stop) : Play the selected musics.
Once a music finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the ENTER button, the current music in play- back will stop. Stop Play (During playback) : Stop the playing musics. Play With Photo : Start playing the selected musics and then move to the Photo List. Mark All : Mark all musics in the folder. Delete : Delete the selected musics. Cancel : Close the pop-up menu.
When music is playing, is dis- played in front of the music title. A damaged or corrupted music does not play but displays 00:00 in playtime. A music downloaded from a paid service with copyright protection does not start but displays inap- propriate information in playtime.
Repeatedly, press EXIT button to return to TV viewing or press button to return to the Media Host menu.
I If you don't press any button for a while during the play-
If you press ENTER, , EXIT buttons, screen saver is stopped. The , buttons on the remote control are also available in this mode.
ing, the play information box (as shown in the below) will float as a screen saver.
I The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.

PICTURE SIZE (ASPECT RATIO)CONTROL
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is dis- played on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed.
I RGB-PC input source use 4:3 or 16:9 aspect ratio.
Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the PICTURE menu. 1
Set by program
Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.
Selects the proper picture proportion to match the source’s image.
(4:3 4:3) (16:9 16:9)



4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.
Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage.

4:3

16:9 Adjust the picture horizontally, in a linear pro- portion to fill the entire screen.

16:9

Picture Mode -Preset
Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the program category. Intelligent Eye, Dynamic, Standard, Mild Settings are preset for optimum picture quality at the factory and are not adjustable. In the User 1, and User 2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint.
SOUND SOUND SAP SAP CC CC
PICTURE
MARK MARK USB EJECT USB EJECT
PICTURE CONTROL
Press the PICTURE button repeatedly to select the picture appearance setup option as shown below : Intelligent Eye, Dynamic, Standard, Mild, User1, and User2 (your own settings).
Press the EXIT button to save and return to TV viewing.
I You can also use the PICTURE menu to adjust Picture Mode.
XD


Choose one of three automatic color adjustments. Set to warm
to enhance hotter colors such as red, or set to cool to see less
intense colors with more blue.
When selecting Picture Mode options (Dynamic, Standard and Mild), Color Temperature is automatically change.
When selecting Picture Mode options (User 1 and User 2), you can choose the Color Temperature.

Press the MENU button and then use D or E button to select the PICTURE menu.
Press the G button and then use D or E button to select Color Temperature.
Press the G button and then use D or E button to select either Cool, Medium, Warm or User.

Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


Picture Mode -User Mode
Adjust the picture appearance to suit your preference and viewing situations.

Press the MENU button and then use D or E button to select the PICTURE menu.
Press the G button and then use D or E button to select Picture Mode.
Press the G button and then use D or E button to select User 1 or User 2.
Press the G button and then use D or E button to select the desired picture option (Contrast, Brightness, Color, Sharpness,Tint or Back Light).
Selection ( G or ) leads you to the detailed setting screen.
I [Back Light] To control the brightness of screen, adjust
Press the G button and then use F or G button to make appropriate adjustments.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


You can also adjust the detailed settings(Red, Green, Blue) by selecting the User menu. This feature operate only if the picture mode set User 1 or User 2.

Press the MENU button and then use D or E button to select the PICTURE menu.
Press the G button and then use D or E button to select Color Temperature.
Press the G button and then use D or E button to select User.
Press the G button and then use D or E button to select Red, Green, or Blue.
Selection ( G or ) leads you to the detailed setting screen.
Press the G button and then use F or G button to make appropriate adjustments.
I The adjustment range of Red, Green, or Blue
is -20~ +20.

Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


XD is LG Electronics unique picture improving technology to display a real HD source through an digital signal processing algorithm.
When selecting Picture Mode options (Dynamic, Standard and Mild), XD is automatically change to Auto.
When selecting Picture Mode options (User 1 and User 2), you can choose the Auto / Manual and when selecting Manual, you can adjust the XD Contrast, XD color and XD Noise.
Press the MENU button and then use D or E button to select the PICTURE menu.
Press the G button and then use D or E button to select XD.
Press the G button and then use F or G button to select Auto or Manual.
* Selecting the Manual 1. Press the E button and then use D or E button to select XD Contrast, XD Color or XD Noise .
according to the brightness of the reflection.
tion automatically to reproduce as closely as possible to the natural colors.
does not damage the original picture.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

ADVANCED -CINEMA 3:2 PULLDOWN MODE

Set up the TV for the best picture appearance for viewing movies.
This feature is disable only in RGB-PC, HDMI1, HDMI2, HDMI3 or Component1,2(except 480i) mode.
When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display (This function is only available in TV(Analog, DTV), AV1, AV2, Component 480i mode.)

Press the MENU button and then use D or E button to select the PICTURE menu.
Press the G button and then use D or E button to select Advanced.

Press the G button and then use D or E button to select Cinema 3:2 Mode.
Press the G button and then use F or G button to select On or Off.

Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


Adjusting the contrast and the brightness of the screen using the black level of the screen.
This feature operates only in HDMI1, HDMI2, HDMI3 or AV1, AV2 mode.

Press the MENU button and then use D or E button to select the PICTURE menu.
Press the G button and then use D or E button to select Advanced.
Press the G button and then use D or E button to select Black level.
Press the G button and then use F or G button to select Low, or High.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

ADVANCED-TruM (Only 32/37/42LB4D models)
Set up the TV for best picture with film judder cancellation that pro- vides stunningly steady movements.
This feature is disable in RGB-PC, HDMI-PC mode.
And when HDMI is set to the PC in Input Label, TruM is also dis- able.
Press the MENU button and then use D or E button to select the PICTURE menu.
Press the G button and then use D or E button to select Advanced.
Press the G button and then use D or E button to select TruM.
Press the G button and then use F or G button to select Off, Low, or High.
Cinema 3:2 Mode Off
Set amount of film judder to low.
Set amount of film judder to high.
* If you have some problem in viewing picture, set TruM to Low or Off.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


Use to quickly reset all the Picture menu options to their origi- nal factory preset values.
Press the MENU button and then use D or E button to select the PICTURE menu.

Press the G button and then use D or E button to select Picture Reset.
Press the G button to reset the Picture menu options to original values.
Selection ( G or ) resets to the factory settings(defaults).


Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level. Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV pro- gram.

Press the MENU button and then use D or E button to select the AUDIO menu.
Press the G button and then use D or E button to select Auto Volume.
Press the G button and then use D or E button to select On or Off.

Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

Sound Mode lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content.
MARK MARK USB EJECT USB EJECT
Standard, Music, Movie, Sports and User are preset for good sound quality at the factory and are not adjustable.
Press the SOUND button repeatedly to select the appropriate sound setup as shown below : Standard, Music, Movie, Sports and User (your own settings).
Press EXIT button to return to TV viewing .
I You can also adjust Sound Mode in the AUDIO menu.

Standard Music Movie Sports User


Adjust the sound to suit your taste and room situations.
Press the MENU button and then use D or E button to select the AUDIO menu.

Press the G button and then use D or E button to select Sound Mode.
Selection ( G or ) leads you to the detailed setting screen.
Press the G button and then use D or E button to select User.

Press the G button and then use D or E button to select the desired sound option ( Treble, Bass , or Front Surround ).

Press the G button and then use or button to make appropriate adjustments.
* Selecting the Front Surround Press the G button and then use or button to select Off, 3D EchoSound System or SRS (Sound Retrieval System)TruSurround XT .
Front Surround 3D EchoSound System
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
SRS TruSurround XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material.
3D EchoSound System Creates a stunning simulated stereo effect from any mono sound and a realistic three-dimensional sound with a very wide and deep sound stage.


Adjust the left/right sound of speaker to suit your taste and room situations.

Press the MENU button and then use D or E button to select the AUDIO menu.
Press the G button and then use D or E button to select Balance.
Press the G button and then use or button to make appropriate adjustments.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo pro- gram if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to the mono sound in remote areas during stereo/SAP broadcasting. Stereo or SAP can be received in Analog channel.
PICTURE PICTURE SOUND SOUND SAP CC CC
MARK MARK USB EJECT USB EJECT
Use the SAP button to select your desired MTS mode in analog signal. Each time you press the SAP button, Mono, Stereo, or SAP appear in turn.
I If other languages available on the digital signal, select them with the SAP
button.


Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off.

Press the MENU button and then use D or E button to select the AUDIO menu.
Press the G button and then use D or E button to select TV Speaker.
Press the G button and then use D or E button to select On or Off.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


Other languages may be available if a digital signal is provided by the broadcasting station.
This feature operate only in DTV/CADTV mode.
Press the MENU button and then use D or E button to select the OPTION menu.

Press the G button and then use D or E button to select Language.
Press the G button and then use D or E button to select Audio.
Press the G button and then use or button to select : English, Spanish, or French.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.



The menus can be shown on the screen in the selected language. First select your language.
Press the MENU button and then use D or E but- ton to select the OPTION menu.

Press the G button and then use D or E button to select Language.
Press the G button and then use D or E button to select Menu.
Press the G button and then use or button to select your desired language. From this point on, the on-screen menus will be shown in the selected language.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


Caption must be provided to help people with hearing loss watch TV.
Press the MENU button and then use D or E but- ton to select the OPTION menu.

Press the G button and then use D or E button to select Caption.
Press the G button and then use D or E button to select Mode.
Use or button to select On or Off.
I When selecting Off, Submenus for Analog, DTV,
and Digital Option become disabled.
Analog Broadcasting System Captions
Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog.
Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
PICTURE PICTURE SOUND SOUND SAP SAP CC
MARK MARK USB EJECT USB EJECT
I CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.
I TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster.
This TV is programmed to memorize the caption/text mode which was last set when you turn the power off.
I Using the CC button
Use the CC button repeatedly to select Caption On or Off.
Press EXIT button to save and return to TV viewing.

I Using the MENU button
This function is only available when Caption Mode is set On.
Press the MENU button and then use D or E but- ton to select the OPTION menu.
Press the G button and then use D or E button to select Caption.
Press the G button and then use D or E button to select Analog.
Press the G button and then use or button to select: CC1~ CC4 , Text1~ Text4.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


Choose the language you want the DTV/CADTV Captions to appear in.
This function is only available when Caption Mode is set On.
Press the MENU button and then use D or E but- ton to select the OPTION menu.

Press the G button and then use D or E button to select Caption.
Press the G button and then use D or E button to select Digital.
Press the G button and then use or button to select: Service1~ Service6.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


Customize the DTV/CADTV captions that appear on your screen.
This function is only available when Caption Mode is set On.
Press the MENU button and then use D or E but- ton to select the OPTION menu.

Press the G button and then use D or E button to select Caption.
Press the G button and then use D or E button to select Digital Option.
Press the G button and then use or button to select Custom.
Use D or E button to customize the Style, Font, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language.
Selection ( Gor ) leads you to the
I Size: Set the size the words will appear in.

I Text Color: Choose a color for the text.
I Text Opacity: Specify the opacity for the text color.
Selection ( Gor ) leads you to the
I Edge Color: Select a color for the edges.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

CLOCK SETTING

The time is set automatically from a digital channel signal.
The digital channel signal includes information for the current time provided by the broadcasting station.
Set the clock manually if the current time is set incorrectly by the auto clock function.
Press the MENU button and then use D or E button to select the TIME menu.
Press the G button and then use D or E button to select Clock.
Press the G button and then use D or E button to select Auto.
Year - Date - - / - - Time - - : -
Press the G button and then use D or E button to select your viewing area time zone : U.S.A : Eastern, Central, Mountain, Pacific, Alaska or
New F.land or Atlantic.

Press the G button and then use D or E button to select Auto, Off, On, depending on whether or not your viewing area observes Daylight Saving time.
Year - Date - - / - - Time - - : -
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

Manual Clock Setup

If the current time setting is wrong, reset the clock manually.

1 Press the MENU button and then use D or E button to select the TIME menu.
Press the G button and then use D or E button to select Clock.

Press the G button and then use D or E button to select Manual.
Press the G button and then use F or G button to select either the year, date, or time option. Once selected, use the D or E button to set the year, date, and time options.
Year - Date - - / - - Time - - : -

Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


The timer function operates only if the current time has been set. The Off-Time function overrides the On-Time function if they are both set to the same time. The TV must be in standby mode for the On-Time to work. If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV will automatically revert to standby mode.

Press the MENU button and then use D or E button to select the TIME menu.
Press the G button and then use D or E button to select Off Time or On Time.
Press the G button and then use D or E button to select On.
Press the G button and then use D or E button to set the hour.
Press the G button and then use D or E button to set the minutes.
Only On Time Press the G button and then use D or E button to select the channel at turn-on.
Press the G button and then use D or E button to set the sound level at turn-on.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

SLEEP TIME SETTING

The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.
You can also set up the Sleep Time in the TIME menu.

Press the TIMER button repeatedly to select the number of minutes. First the Off option appears on the screen, followed by the following Sleep Time options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to count down from the number of minutes selected.
To check the remaining minutes before the TV turns off, press the TIMER button once.
To cancel the Sleep Time, press the TIMER button repeatedly to select Off.
I You can also set up the Sleep Time in the TIME menu.


Off 10 min 20 min 30 min 60 min 90 min 120 min 180 min 240 min


TV will be automatically turned off, in case of no signal inTV & input source or no remote control input for 10 minutes.

Press the MENU button and then use D or E button to select the TIME menu.
Press the G button and then use D or E button to select Auto Sleep.
Press the G button and then use D or E button to select On or Off.
TV will be automatically turned off, in case of No Signal for 10 minutes.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possi- ble to block all program viewing for a time period. To use this function, the following must be done : 1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.
I TV-G (General audience)
I TV-MA (Mature audience only)
I TV-PG (Parental guidance suggested)
I TV-Y (All children)
I TV-14 (Parents strongly cautioned)
I TV-Y7 (Children 7 years older)
Setting up your Password
Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu.
Press the MENU button and then use the D or E button to select the LOCK menu. Then, press the G button.
I Enter the password as requested.
I The TV is set up with the initial
password “0-0-0-0”.
Enter Password

For USA For Canada
Change the password by inputting a new password twice.
After inputting the password, use the D or E button to choose Set password.
Press the G button and then choose any 4 digits for your new password and enter the them on the new.

As soon as the 4 digits are entered, reenter the same 4 digits on the Confirm. Then your changed password has been memorized.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Enables or disables the blocking scheme you set up previously.
For USA For Canada
After inputting the password, use the D or E button to choose Lock System.
Press the G button and then use the D or E to select On or Off.
I When you select, the Lock System is enable.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

CHANNEL BLOCKING
Blocks any channels that you do not want to watch or that you do not want your children to watch.
For USA For Canada
After inputting the password, use the D or E button to choose Block Channel.
Press the G button. You will now see a screen filled with channel numbers and a preview picture.
Use D E F G button to select a channel and then use the ENTER button to block or unblock it.
Selection ( G or ) leads you to
the block channel screen.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.


Movie Rating (MPAA) -for USA only
Blocks movies according to the movie ratings limits speci- fied, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
After inputting the password, use the D or E button to choose Movie Rating.
Press the G button and then use the D or E to select G, PG, PG-13, R, NC-17 or X.
I G (General audiences)
I PG (Parental guidance suggested)
I PG-13 (Parents strongly cautioned)
I NC-17 (No one 17 and under admitted)
I X (Adult only)
I Blocking Off (Permits all programs)
PG-13, R, NC-17 and X will be blocked.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

TV Rating Children -for USA only
Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
After inputting the password, use the D or E button to choose TV Rating-Children.
Press the G button and then use the D or E to select Age, or Fantasy Violence. Press the G button and then use the D or E button to select block options.
I Age(applies to TV-Y, TV-Y7)
I Fantasy Violence(applies to TV-Y7)
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Based on the ratings, blocks certain TV programs that you and your family do not want to view.
After inputting the password, use the D or E button to choose TV Rating-General.
Press the G button and then use the D or E button to select Age, Dialogue, Language, Sex or Violence. Press the G button and then use the D or E button to select block options.
I Age(applies to TV-G,TV-PG,TV-14,TV-MA)
I Dialogue-sexual dialogue(applies to TV-PG,TV-14)
I Language-adult language(applies to TV-PG,TV-14,TV-MA)
I Sex-sexual situations(applies to TV-PG,TV-14,TV-MA)
I Violence(applies to TV-PG,TV-14,TV-MA)
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

Selecting canadian english language rating system.
After inputting the password, use the D or E button to choose TV Rating-English.
Press the G button and then use the D or E button to select E, C, C8+, G, PG, 14+, 18+, or Blocking Off.
I C8+(Children eight years and older)
I G(General programming, suitable for all audiences)
I PG(Parental Guidance )
E C C8+ G PG 14+ 18+ Blocking Off
I 14+(Viewers 14 years and older)
I Blocking Off(Permits all programs)
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Selecting canadian french language rating system.
After inputting the password, use the D or E button to choose TV Rating-French.
Press the G button and then use the D or E button to select E, G, 8 ans+, 13 ans+, 16 ans+, 18 ans+, or Blocking Off.
I 8 ans+(General-Not convenient for little children)
I 13 ans+(Not convenient for children of 13 years and
I 16 ans+(Not convenient for children of 16 years and
E G 8 ans+ 13 ans+ 16 ans+
I 18 ans+(This programs is only for adults)
I Blocking Off(Permits all programs)
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

EXTERNAL INPUT BLOCKING
For USA For Canada
Enables you to select a source to block from the external source devices you have hooked up.
After inputting the password, use the D or E button to choose Input Block.
Press the G button and then use the D or E to select a source.
Press the G button and then use the or to select On or Off on the each source.
Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block G
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
Press the MENU button and then use D or E button to select the OPTION menu.
Press the G button and then use D or E button to select Key Lock.
Press the G button and then use D or E button to select On or Off.
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

TROUBLESHOOTING
The operation does not work normally.
I Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.
I Ensure that the batteries are installed with correct polarity (+ to +, - to -).
I Ensure that the correct remote operating mode is set: TV, VCR etc.
I Install new batteries.
I Is the sleep timer set?
I Check the power control settings. Power interrupted.
I No broadcast on station tuned with Auto off activated.
The video function does not work.
I Check whether the product is turned on.
I Try another channel. The problem may be with the broadcast.
I Is the power cord inserted into wall power outlet?
No picture & No sound
I Check your antenna direction and/or location.
I Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
I This is normal, the image is muted during the product startups process. Please
contact your service center, if the picture has not appeared after five minutes.
I Adjust Color in menu option.
I Keep a sufficient distance between the product and the VCR.
No or poor color
I Try another channel. The problem may be with the broadcast.
I Are the video cables installed properly?
I Activate any function to restore the brightness of the picture.
I Check for local interference such as an electrical appliance or power tool.
I Station or cable product experiencing problems, tune to another station.
I Station signal is weak, reorient antenna to receive weaker station.
I Check for sources of possible interference.
I Check antenna (Change the direction of the antenna).

The audio function does not work.
I Press the VOL or VOLUME button.
I Sound muted? Press MUTE button.
Picture OK & No sound
I Try another channel. The problem may be with the broadcast.
I Are the audio cables installed properly?
No output from one
I Adjust Balance in menu option.
I A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the product.
There is a problem in PC mode. (Only PC mode applied)
I Adjust resolution, horizontal frequency, or vertical frequency.
The signal is out of range
I Check the input source.
Vertical bar or stripe on
I Work the Auto configure or adjust clock, phase, or H/V position. (Option)
background & Horizontal Noise &
I Check the signal cable.
Screen color is unstable
I Reinstall the PC video card.

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
I To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
I Please be sure not to use a wet cloth.
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

PRODUCT SPECIFICATIONS
Width x Height x Depth With Stand (inches/mm)
36.5x27.3x11.1 inches 927.0x692.8x283.2 mm 36.5x24.8x3.5 inches 927.0x630.0x88.0 mm
Weight (pounds / kg) With Stand
44.1 pounds / 20.0kg 35.3 pounds / 16.0kg
40.7x29.5x11.3 inches 1033.1x750.0x287.6 mm
Width x Height x Depth With Stand (inches/mm)
40.7x27.0x3.5 inches 1033.1x686.5x88.5 mm
Weight (pounds / kg) With Stand
60.6 pounds / 27.5kg 50.7 pounds / 23.0kg
45.1x32.5x13.0 inches 1144.5x825.6x331.0 mm
Width x Height x Depth With Stand (inches/mm)
45.1x29.7x4.1 inches 1144.5x754.9x103.0 mm
Weight (pounds / kg) With Stand
82.7 pounds / 37.5kg 69.2 pounds / 31.4kg
Width x Height x Depth With Stand (inches/mm)
50.6x35.5x14.1 inches 1284.6x901.8x356.9 mm 50.6x32.7x4.4 inches 1284.6x831.6x111.5 mm
Weight (pounds / kg) With Stand
106.0 pounds / 48.1kg 89.3 pounds / 40.5kg
APPENDIX
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
0 ~ 40°C
-20 ~ 60°C
I The specifications shown above may be changed without prior notice for quality improvement.

31.8x23.9x9.8 inches 806.6x606.5x249.0 mm 31.8x21.6x3.1 inches 806.6x548.6x79.0 mm
Width x Height x Depth With Stand (inches/mm)
Weight (pounds / kg) With Stand
31.3 pounds / 14.2 kg 25.8 pounds / 11.7 kg
36.5x27.5x11.0 inches 926.6x697.6x280.4 mm
Width x Height x Depth With Stand (inches/mm)
36.5x25.0x3.5 inches 926.6x635.6x88.0 mm
Weight (pounds / kg) With Stand
44.0 pounds / 20.0 kg 36.0 pounds / 16.3 kg
40.7x29.5x11.3 inches 1032.7x750.0x287.6 mm 40.7x27.0x3.5 inches 1032.7x685.5x88.5 mm
Width x Height x Depth With Stand (inches/mm)
Weight (pounds / kg) With Stand
60.0 pounds / 27.1 kg 49.9 pounds / 22.6 kg
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
0 ~ 40°C
APPENDIX
-20 ~ 60°C
I The specifications shown above may be changed without prior notice for quality improvement.

PROGRAMMING THE REMOTE CONTROL
The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands.
To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote.
After that, press the POWER button. If the device is turned off and it responds properly the remote control need not be programmed. If not, the remote should be programmed to operate the device. The program- ming procedures are explained below.
Press the MENU and MUTE button continuously at the same time for two seconds; the currently selected device button is illuminated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2.
Enter the appropriate code from the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful.
Press the MENU button to store the code. After blinking twice, this code is stored.
Test the remote control functions to see if the device responds properly. If not, steps 2-5.

VCRs
Brand Codes Brand Codes Brand Codes
AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 DAYTRON 108 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME 059 EMERSON 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 FISHER 003 008 009 010 FUNAI 034 GE 031 033 063 072 107 109 144 147 GO VIDEO 132 136 HARMAN KARDON 012 045 HITACHI 004 018 026 034 043 063 137 150 INSTANTREPLAY 031 033 JCL 031 033 JCPENNY 012 013 015 033 040 066 101 JENSEN 043 JVC 012 031 033 043 048 050 055 060 130 150 152 KENWOOD 014 034 039 043 047 048 LG (GOLDSTAR) 001 012 013 020 101 106 114 123 LLOYD 034 LXI 003 009 013 014 017 034 101 106 MAGIN 040
MAGNAVOX 031 033 034 041 067 068 012 031 033 067
SAMSUNG 032 040 102 104 105 107 109 112 113 115 120 122 125 SANSUI 022 043 048 135 SANYO 003 007 010 014 102 134 SCOTT 017 037 112 129 131 SEARS 003 008 009 010 013 014 017 020 031 042 073 081 101 SHARP 031 054 149 SHINTOM 024 SONY 003 009 031 052 056 057 058 076 077 078 149 SOUNDESIGN 034 STS 013 SYLVANIA 031 033 034 059 067 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 TEAC 034 039 043 TECHNICS 031 033 070 TEKNIKA 019 031 033 034 101 THOMAS 034 TMK 006 TOSHIBA 008 013 042 047 059 082 112 131 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC 040 WARDS 003 013 017 024 031 033 034 040 053 054 131 YAMAHA 012 034 039 043 ZENITH 034 048 056 058 072 080 101
MARTA 101 MATSUI 027 030 MEI 031 033 MEMOREX 003 010 014 031 033 034 053 072 101 102 134 139 MGA 045 046 059 MINOLTA 013 020 MITSUBISHI 013 020 045 046 049 051 059 061 151 MTC 034 040 MULTITECH 024 034 NEC 012 023 039 043 048 NORDMENDE 043 OPTONICA 053 054 PANASONIC 066 070 074 083 133 140 145
PENTAX 013 020 031 033 063 PHILCO 031 034 067 PHILIPS 031 033 034 054 067 071 101 PILOT 101 PIONEER 013 021 048 PORTLAND 108 PULSAR 072 QUARTZ 011 014 QUASAR 033 066 075 145 RCA 013 020 033 034 040 041 062 063 107 109 140 144 145 147 REALISTIC 003 008 010 014 031 033 034 040 053 054 101 RICO 058 RUNCO 148 SALORA 014

Cable Box
Brand Codes Brand Codes Brand Codes
ABC 003 004 039 042 046 052 053 AJIN 112 ANTRONIK 014 ARCHER 005 007 014 024 CABLE STAR 026 CENTURION 092 CENTURY 007 CITIZEN 007 COLOUR VOICE 065 090 COMBANO 080 081 COMTRONICS 019 030 DIAMOND 023 EAGLE 020 030 040 EASTERN 057 062 066 ELECTRICORD 032 GE 072 GEMINI 008 022 025 054 GI 052 074 GOLDEN CHANNEL 030 HAMLIN 049 050 055 HITACHI 052 055 HOSPITALITY 070 077 JERROLD 002 003 004 008 009 010 052 069
074 LG (GOLDSTAR) 001 106 101 005 M-NET 037 MACOM 033 MAGNAVOX 010 012 064 079 MEMOREX 100 MOVIE TIME 028 032 NSC 015 028 038 071 073 OAK 016 031 037 053 PANASONIC 044 047 PARAGON 100
REMBRANT 025 SAMSUNG 102 107 030 068 SCIENTIFIC ATLANTA 003 011 041 042 043 045 046 SHERITECH 022 SIGNAL 030 SIGNATURE 052 SL MARX 030 SPRUCER 047 078 STARCOM 002 004 008 009 STARGATE 008 030 TADIRAN 030 TAEKWANG 110 TAIHAN 105 TANDY 017 TEXSCAN 029 TOCOM 039 040 056 TOSHIBA 100 UNIKA 007 014 024 UNITED CABLE 004 053 UNIVERSAL 005 007 014 024 026 027 032 035 VIEWSTAR 012 015 018 086 087 088 089 ZENITH 100 114 060 093
PHILIPS 006 012 013 020 065 085 090 PIONEER 034 051 052 063 076 POST NEWS WEEK016 PRUCER 059 PTS 011 048 071 072 073 074 PULSAR 100 RCA 047 REGAL 049 050 REGENCY 057
ALPHASTAR DSR 123 AMPLICA 050 BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 015 018 036 055 CHAPARRAL 008 009 012 077 CITOH 054 CURTIS MATHES 050 145 DRAKE 005 006 007 010 011 052 112 116 141 DX ANTENNA 024 046 056 076 ECHOSTAR 038 040 057 058 093 094 095 096 097 098 099 100 122 ELECTRO HOME 089 EUROPLUS 114 FUJITSU 017 021 022 027 133 134 GENERAL INSTRUMENT 003 004 016 029 031 059 101 HITACHI 139 140
PROSAT 072 RCA 066 106 REALISTIC 043 074 SAMSUNG 123 SATELLITE SERVICE CO 028 035 047 057
057 104 HUGHES 068 JANIEL 060 147 JERROLD 061 KATHREIN 108 LEGEND 057 LG 001 LUTRON 132 LUXOR 062 144 MACOM 010 059 063 064 065 MEMOREX 057 NEXTWAVE 028 124 125 NORSAT 069 070 PACE SKY SATELLITE 143 PANASONIC 060 142 PANSAT 121 PERSONAL CABLE 117 PHILIPS 071 PICO 105 PRESIDENT 019 102 PRIMESTAR 030 110 111
085 SCIENTIFIC ATLANTA 032 138 SONY 103 STARCAST 041 SUPER GUIDE 020 124 125 TEECOM 023 026 075 087 088 090 107 130 137 TOSHIBA 002 127 UNIDEN 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 VIEWSTAR 115 WINEGARD 128 146 ZENITH 081 082 083 084 091 120

Brand Codes Brand Codes Brand Codes
AIWA 014 028 070 096 125 129 139 229 230 AKAI 163 ANAM 003 014 017 023 059 106 189 216 217 235 236 BURMECTER 252 CARVER 086 CLARION 199 DAEWOO 027 053 060 084 102 148 198 221 DENON 015 075 130 143 FANTASIA 071 FINEARTS 022 FISHER 089 099 LG(GOLDSTAR) 001 021 024 029 087 107 108 110 190 191 192 210 211 212 239 HAITAI 034 035 188 222 HARMAN/KARDON 068 JVC 004 013 141 KEC 185 186 187 KOHEL 030 NAD 045 046 KENWOOD 038 050 067 089 170 171 197 206 215 222 INKEL 037 058 062 069 078 079 095 121 122 149 150 151 152 153 154 155
157 158 159 160 189 207 222 224 225 226 227 243 247 LOTTE 014 016 036 098 100 172 173 174 175 176 177 178 179 180 181 183 201 202 208 213 214 219 223 232 238 240 LXI 103 MAGNAVOX 111 MARANTZ 002 018 020 025 034 041 081 090 097 112 MCINTOSH 049 MCS 104 MEMOREX 107 NAD 046 ONKYO 013 040 041 047 048 056 057 132 133 140 OPTIMUS 158 PANASONIC 007 033 064 113 142 220 241 251 PENNEY 104 PHILIPS 026 112 143 PIONEER 039 042 043 063 065 091 093 094 115 123 127 250 QUASAR 113 RCA 080
RCX 092 REALISTIC 103 106 SAMSUNG 124 145 146 182 193 194 195 203 204 244 245 246 SANSUI 011 135 138 144 SANYO 019 083 234 SCOTT 106 186 SHARP 031 032 051 052 072 082 117 119 156 184 199 200 206 209 SHERWOOD 005 006 158 SONY 044 045 109 114 118 126 248 249 TAEKWANG 012 020 073 074 076 077 105 161 162 163 164 165 166 167 168 169 205 231 233 242
TEAC 010 085 106 136 185 187 237 TECHNICS 101 113 128 134 147 218 TOSHIBA 137 THE 061 VICTOR 088 131 WARDS 089 YAMAHA 054 055 066 092 199
Brand Codes Brand Codes Brand Codes DVD
APEX DIGITAL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNAVOX 013 MARANTZ 024
MITSUBISHI 002 NAD 023 ONKYO 008 017 PANASONIC 003 009 PHILIPS 013 PIONEER 004 026 PROCEED 021 PROSCAN 005 006
RCA 005 006 SAMSUNG 011 015 SONY 007 THOMPSON 005 006 TOSHIBA 019 008 YAMAHA 009 018 ZENITH 010 016 025

IR CODES
1. How to Connect
I Connect your wired remote control to the Remote Control port on the TV.
Single pulse, modulated with 37.917KHz signal at 455KHz
FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3
I Configuration of frame
Lead code Low custom code High custom code Data code Data code
C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7
4.5 ms 9 ms
APPENDIX
0.55 ms
2.25 ms 9 ms
Bit ”0” Bit ”1”
0.56 ms
0.56 ms
1.12 ms
2.24 ms
The waveform is transmitted as long as a key is depressed.

Code Function Note (Hexa)
Code Function Note (Hexa)
0F TV INPUT R/C Button
BF COMPONENT1 Discrete IR Code
0B INPUT R/C Button
08 POWER R/C Button (Power On/Off)
D4 COMPONENT2 Discrete IR Code
79 RATIO R/C Button
0E TIMER R/C Button
D5 RGB-PC Discrete IR Code
10-19 Number Key 0-9 R/C Button
4C - (Dash) R/C Button
CE HDMI1 Discrete IR Code
1A BACK R/C Button
09 MUTE R/C Button
CC HDMI2 Discrete IR Code
02 VOL D R/C Button
03 VOL E R/C Button
76 Ratio 4:3 Discrete IR Code
00 CH D R/C Button
(Only 4:3 Mode)
01 CH E R/C Button
77 Ratio 16:9 Discrete IR Code
1E FAV R/C Button
(Only 16:9 Mode)
39 CC R/C Button
AF Ratio Zoom Discrete IR Code
40 D R/C Button
41 E R/C Button
C4 POWER ON Discrete IR Code
07 F R/C Button
06 G R/C Button
C5 POWER OFF Discrete IR Code
44 ENTER R/C Button
B0 PLAY R/C Button
43 MENU R/C Button
BA PAUSE R/C Button
33 BRIGHT+ R/C Button
B1 STOP R/C Button
52 SOUND R/C Button
BD REC R/C Button
4D PICTURE R/C Button
8F REW R/C Button
5B EXIT R/C Button
8E FF R/C Button
7E SIMPLINK R/C Button
B2 GO TO PREV R/C Button
0A SAP R/C Button
B3 GO TO NEXT R/C Button
D6 TV Discrete IR Code
7C MEDIA HOST R/C Button
7D MARK R/C Button
5A AV1 Discrete IR Code
CA USB EJECT R/C Button
D0 AV2 Discrete IR Code

EXTERNAL CONTROL THROUGH RS-232C
Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.

Type of Connector; D-Sub 9-Pin Male


7-Wire Configurations (Standard RS-232C cable)
PC PDP
RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS
RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DTR DSR 6 4 DSR RTS 7 7 RTS CTS 8 8 CTS
D-Sub 9 D-Sub 9
D-Sub 9 D-Sub 9
Use this function to specify a TV ID number. Refer to ‘Real Data Mapping 1’. p.104
Press the MENU button and then use D or E button to select the OPTION menu.
Press the G button and then use D or E button to select SET ID .
Press the G button and then use D or E button to adjust SET ID to choose the desired TV ID number. The adjustment range of SET ID is 1~99.
Set ID G 1
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
I Use a crossed (reverse) cable.

Command Reference List
COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 DATA (Hexadecimal)
k m 0 ~ 1
COMMAND1 COMMAND2 DATA0 (Hexadecimal)
physical major major low minor high minor low attribute program high program low m a
m b 0~1
m c key code
m g 0~64

[Command1][Command2][ ][Set ID][ ][Data][Cr] [Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC com- puter.
[Command 2] : Second command to control the set.
number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission/receiving protocol.
*in this model, TV will not send the status during the standby
mode.
[DATA] : To transmit command data.
[command 2] : use as command.
Transmit ‘FF’ data to read status of command.
*In this model, TV will not send the status during the standby mode.
*in this model, TV will send the echo, CR, LF with ack mes-
sage.
When it send the power on ack message, it will be like below.
Ex) ka 01 01(CR)(LF)a 01 OK01x(CR)(LF)
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable func- tions or communication errors.
will send the ‘a’, ‘b’
*in this model, TV will send the echo, CR, LF with
ack message.
When it send the power on ack message, it will be
like below.
*in this model, TV will not send the status during
Ex) ka 01 01(CR)(LF)a 01 NG01x(CR)(LF)
the standby mode.
[command 2] : use as command.
will send the ‘0’,’a’

To control Power On/Off of the TV.
To control volume mute on/off.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
You can also adjust mute using the MUTE button on remote control.
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off) Data 1 : Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
* Note: In this model, TV will send the Acknowledge after power on processing completion.
To adjust volume.
There might be a time delay between command and acknowledge.
You can also adjust volume with the volume buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
To select input source for the TV.
Refer to ‘Real data mapping 1’ as shown below.
Transmission [k][b][ ][Set ID][ ][Data][Cr]
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
*Refer to ‘Real data mapping 1’ as shown below.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
To adjust the screen format.
You can also adjust the screen format using the RATIO button on remote control or in the Picture menu.
To adjust screen brightness.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
You can also adjust brightness in the Picture menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
*Refer to ‘Real data mapping 1’ as shown below.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
*Real data mapping 1
To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
Reserved

*Refer to ‘Real data mapping 1’. See page 104.
To adjust the screen color.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust color in the Picture menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
To adjust bass.
*Refer to ‘Real data mapping 1’. See page 104.
You can also adjust bass in the Audio menu.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][s][ ][Set ID][ ][Data][Cr]
*Refer to ‘Real data mapping 1’. See page 104.
To adjust the screen tint.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust tint in the Picture menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
To adjust balance.
*Refer to ‘Real data mapping 1’. See page 104.
You can also adjust balance in the Audio menu.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][t][ ][Set ID][ ][Data][Cr]
*Refer to ‘Real data mapping 1’. See page 104.
To adjust the screen sharpness.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust sharpness in the Picture menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
To adjust color temperature.
*Refer to ‘Real data mapping 1’. See page 104.
You can also adjust color temperature in the Picture menu.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][u][ ][Set ID][ ][Data][Cr]
To select OSD (On Screen Display) on/off.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
To adjust red in color temperature
Transmission [k][v][ ][Set ID][][Data][Cr]
Data Min:0 ~ Max:C8
To lock the remote control and the front panel controls on the set.
*Refer to "Real data mapping 2". See page 106.
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
To adjust green in color temperature.
If you’re not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released.
Transmission [k][w][ ][Set ID][][Data][Cr]
Max:C8
*Refer to "Real data mapping 2". See page 106.
Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]
14 Treble (Command2:r)
To adjust treble.
You can also adjust treble in the Audio menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]

To adjust blue in color temperature.
Transmission [k][$][ ][Set ID][][Data][Cr]
Data Min:0 ~ Max:C8
*Refer to "Real data mapping 2". See page 106.
Acknowledgement [$][ ][Set ID][][OK/NG][Data][x]]
*Real data mapping 2
5F: -1
C8 : +20
To tune channel to following physical/major/minor num ber.
Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
NTSC air:02~45
ATSC air:01~45
ATSC cable:01~87
Channel Number (One part)
Two part channel number:
One part channel number:
If the channel band is ATSC digital cable, it can be used. In case of using one part channel num- ber, minor channel does not need.
Hexadecimal code) · Major number-Minor number

Data5:
Two/One Part Channel 7
Using Physical Channel 6
NTSC Air NTSC Cable
ATSC Air ATSC Cable_std ATSC Cable_hrc
ATSC Cable_irc ATSC cable_auto
... Reserved
All data are transmitted by Hexadecimal code
To add and delete the channels
This bit is used in a cable-ready system.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
If the channel band is NTSC air or NTSC cable, channel tuning can be done by only physical channel. In this case, using physical channel bit must be low(0).
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
But if the channel band is ATSC air or ATSC cable, there are two cases that physical channel enable or disable.
To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]s
If the physical channel sending is meaningful, you should set this bit low(0). If the physical channel sending is meaningless, you should set this bit high(1).
Data Key code: Refer to page 99.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
To select input source for TV.
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
To adjust screen back light.
attribute(0x82): sub picture, two part, using physical channel, ATSC air.
Data Min:0 ~ Max:64
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement[a][ ][Set ID][ ][OK][Data0][Data1] [Data2][Data3][Data4][x][a][ ][Set ID]


Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.