
PLASMA TV
32LC50CS 32LC50CB 32LX50C 32LX50CS 37LC50C 37LC50CB 42LB50C 42LC50C 32LG500H 37LG500H 42LG500H
32LG505H 37LG505H 32LG515H 37LG515H
42PX8DC 42PG65C 42PG60C
Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.

WARNING / CAUTION
To prevent fire or shock hazards, do not expose this product to rain or moisture.
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO
Class B digital device This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre- quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi- sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and main- tenance (servicing) instructions in the literature accompanying the appliance.
and receiver. - Connect the equipment to an outlet on a circuit
different from that to which the receiver is con- nected. - Consult the dealer or an experienced radio/TV
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding sys- tem of the building, as close to the point of the cable entry as practical.
Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product

IMPORTANT SAFETY INSTRUCTIONS
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Do not use this apparatus near water.
Only use attachments/accessories specified by the manufacturer.
Clean only with dry cloth.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.
Unplug this apparatus during lighting storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Never touch this apparatus or antenna during a thunder or lighting storm.
When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV.
Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
CAUTION concerning the Power Cord : It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or elec- tric shock. Do not overload wall outlets. Overloaded wall out- lets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grouned AC outlet) If grounding methods are not possible, have a qualified electri- cian install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable.
Keep the product away from direct sunlight.
Power Supply Short-circuit · Breaker

ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precau- tions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to pro- vide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to prop- er grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna dis- charge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding elec- trode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
Cleaning When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemi- cals such as alcohol, thinners or benzene.
Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV.
Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other mate- rials (e.g.) plastic while plugged in. Do not install in excessively dusty places.
If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center.

Antenna Lead in Wire
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
Antenna Discharge Unit (NEC Section 810-20)
Grounding Conductors (NEC Section 810-21)
Power Service Grounding Electrode System (NEC Art 250, Part H)
Ground Clamps


FOR LCD TV If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the moni- tor's performance. Avoid touching the LCD screen or holding your fin- ger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
On Disposal a. The fluorescent lamp used in this product con-
tains a small amount of mercury. b. Do not dispose of this product with general
household waste. c. Disposal of this product must be carried out in
accordance to the regulations of your local authority.
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please con- tact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product.
UT MODE
MULTI
INPUT
POWER
EZ SOUND INFO SWAP EZ PIC
RATIO CC
PIP PIP CH - PIP CH + PIP INPUT
TV POWER
VCR
DVD
DVD
CC RATIO MENU
INPUT
VCR
TV TV
INPUT MODE
XIT
ENTER
MULTI
INPUT
POWER
RETURN
ENTER
SAP
EZ SOUND INFO SWAP EZ PIC
PIP PIP CH - PIP CH + PIP INPUT
DVD
VOL CH
TIMER
MUTE
CH
PAGE PAGE
P A G E
EXIT
CC RATIO MENU
LCD TV PLASMA TV
ENTER
SAP
VOL
TIMER
1.5V 1.5V
PIP CHPIP CH+ PIP SWAP PIP INPUT
PIP SAP
FLASHBK
MUTE
CH
Copyright© 2007 LGE, All Rights Reserved.
Owner’s Manual, Setup & Operation Guide

* Slightly wipe stained spot on the exterior only with the polishing cloth for the product exteri- or if there is stain or fingerprint on surface of the exterior.
* Do not wipe roughly when removing stain. Please be cautions of that excessive pressure may cause scratch or discoloration.


Torx plus Star head screw (Refer to p.7, 15)
Power Cord (This feature is not available for all models.)
4-Bolts for stand assembly (Refer to p.16) Only 32/37LC5DC*, 32/37LC50C* models
1-Bolt for fixing the Cable Holder (Refer to p.12-13)
(Refer to P.15) Protection Cover Screw for stand fixing


PREPARATION

Power/Standby Indicator Illuminates red when the TV is in standby mode.

Tighten the stand with the four screws (provided as parts of the TV).
Tighten the two of these four screws and the two Torx plus star head screws (provid- ed as parts of the TV) to secure the TV. Tighten the two Torx plus star head screws with a star head driver bit (not provided as parts of the TV).


Indicator Illuminates red when the
TV is in standby mode.
CH CH VOL VOL ENTER ENTER INPUT INPUT MENU MENU ON/OFF ON/OFF
the TV is switched on.

Intelligent Sensor Adjusts picture according to the surrounding conditions
Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.


Power/Standby Indicator Illuminates red when the TV is in standby mode. Illuminates green when the TV is switched on.
Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.
CHANNEL (E, D) Buttons VOLUME (-,+) Buttons MENU Button

BACK PANEL INFORMATION

42PG60C, 42PG65C
32/37/42LG5***












32/37/42LG5***

HDMI/DVI IN, HDMI IN Connect a HDMI (DVI) connection to either input.
AV (Audio/Video) IN Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device.
DIGITAL AUDIO OUT Connect digital audio from various types of equip- ment. Note: In standby mode, these ports do not work.
COMPONENT IN Connect a component video/audio device to these jacks.
RESET/UPDATE/REMOTE CONTROL OUT
RJP INTERFACE
SERVICE ONLY
Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power.
RGB IN (PC) Connect the output from a PC. AUDIO IN (RGB, DVI) Connect the audio from a PC or DTV.
ANTENNA IN Connect over-the air signals to this jack.

BACK COVER FOR WIRE ARRANGEMENT

Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed by accident.
G Do not hold the CABLE MANAGEMENT when moving
the product. - If the product is dropped, you may be injured or the
G Hold the CABLE MANAGEMENT with both hands and

(This feature is not available for all models.)

To separate the CABLE HOLDER, loosen the bolt installed the set. 1
Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed by accident.
Install the CABLE HOLDER as shown.



BACK COVER FOR WIRE ARRANGEMENT

Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
Hold the CABLE MANAGEMENT with both hands and pull it as shown.
Install the CABLE MANAGEMENT CLIP as shown. (Except 42PG60C model) If your TV has CABLE HOLDER, fix it as shown and bundle the cables.
Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
CABLE MANAGEMENT CLIP with both hands and pull it upward.
when moving the TV. - If the TV is dropped, you may be injured or

Carefully place the TV screen side down on a cush- ioned surface to protect the screen from damage. 1
Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET/Screw or PLUG IN TYPE HOLDER for power code. It will help prevent the power cable from being removed by accident.
Assemble the parts of the STAND BODY with COVER BASE of the TV. 2






PROTECTIVE BRACKET (This feature is not available for all models.)
Assemble the TV as shown. 3
Install the CABLE MANAGEMENT CLIP as shown. If your TV has the CABLE HOLDER, install it as shown and bundle the cables.







CABLE HOLDER Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
Tighten the stand with the four screws (provided as parts of the TV).


Tighten the two of these four screws and the two Torx plus star head screws (provided as parts of the TV) to secure the TV. Tighten the two Torx plus star head screws with a star head dri- ver bit (not provided as parts of the TV).
After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.
G When assembling the desk type stand, make sure



the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installa- tion). Do not over tighten.


G With some TVs, the PLUG IN TYPE HOLDER
and the CABLE HOLDER are included. If these holders are inserted into the hole provided on back of the TV, they cannot be removed.
or · or

STAND INSTALLATION

Carefully place the product screen side down on a cushioned surface that will protect prod- uct and screen from damage.
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Assemble the product stand with the product as shown.
Assemble the product stand with the product as shown.
Securely install the 4 bolts provided as shown below.
Tighten the 4 bolts securely using the holes in the back of the TV.

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely.
chase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
20° (37LC5DC1, 42LC5DC, 42LC50C, 42PX8DC,
42LB5DC, 42LB50C, 42PG65C models) 90° (32LX5DC/S, 32LX50C/S, 32LC5DC/S,

The TV can be conveniently swivelled on its stand 20°or 90° to the left or right to provide the opti- mum viewing angle.
models)

ATTACHING THE TV TO A DESK
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially caus- ing injury or damaging the product.

* Screws - M5 x L (table depth + 8~10 mm) ex) table depth-15mm: Bolts - M5 x 25


G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket.






B

G Screw length needed depends on the wall mount used. For further information, refer to the VESA

For proper ventilation, allow a clearance of 4inches on each side from the wall.
G Ensure adequate ventilation by following the clearance recommendations.

ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments (Connect to wall antenna socket)
ANTENNA ANTENNA IN IN
Outdoor Antenna (VHF, UHF)
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)
Be careful not to bend the bronze wire when connecting the antenna.
Cable TV Wall Jack
RF Coaxial Wire (75 ohm)
ANTENNA ANTENNA IN IN
Antenna
VHF
G The TV will let you know when the analog, cable, and digital channel scans are complete. NOTE
Copper Wire · Signal Amplifier

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
1. How to connect


Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red).
Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the set. 2
(Refer to the owner’s manual for the digital set-top box.)
button on the remote control.

* 42LB5DC, 42LB50C model only

When connecting HDMI cable
1. How to connect
Connect the digital set-top box to HDMI/DVI IN 1(DVI) or 2 jack on the set.
No separated audio connection is necessary. HDMI supports both audio and video.
OUT (OPTICAL)
HDMI/DVI IN
M.P.I 1(DVI)
2. How to use
(Refer to the owner’s manual for the digital set-top box.)
RJP INTERFACE
COMPONENT IN
the INPUT button on the remote control.
G If the device does not support Auto HDMI, you need to set
the output resolution appropriately.


1. How to connect

Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1(DVI) or 2 jack on the set.
Connect the audio output of the digital set-top box to the AUDIO IN (RGB,DVI) jack on the set.

DVD SETUP
When connecting Component cable
1. How to connect

Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red).

Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set.
button on the remote control.
Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below.



Connect the S-VIDEO output of the DVD to the S -VIDEO input on the set.
Connect the audio outputs of the DVD to the AUDIO input jacks on the set.
1. How to connect

Connect the HDMI output of the DVD to the HDMI/DVI IN 1(DVI) or 2 jack on the set.
No separated audio connection is necessary. HDMI supports both audio and video.

the INPUT button on the remote control.

G If the device does not support Auto HDMI, you need to

VCR SETUP
of time. (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.
ANTENNA ANTENNA IN IN M.P M.P.I..I.
ANT OUT
OUTPUT SWITCH
ANT IN
Wall Jack
Antenna
1. How to connect
Connect the RF antenna out socket of the VCR to the Antenna socket on the set.
Connect the antenna cable to the RF antenna in socket of the VCR.


Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)
nect the audio cable from the VCR to the AUDIO L/MONO jack of the set.

Connect the S-VIDEO output of the VCR to the S -VIDEO input on the set.
Connect the audio outputs of the VCR to the AUDIO input jacks on the set.
and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work.
G The picture quality is improved: compared to normal

OTHER A/V SOURCE SETUP
1. How to connect


Video Game Set Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red)
INPUT button on the remote control.
input source.
Send the TV’s audio to external audio equipment via the Digital Audio Output (Optical) port.

Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.

Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment.
Set the “TV Speaker option - Off” in the AUDIO menu. (G p.58). See the external audio equipment instruction manual for operation.
G When connecting with external audio equipments, such as ampli-
fiers or speakers, please turn the TV speakers off. (G p.58)
G Do not look into the optical output port. Looking at the

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

Connect the RGB output of the PC to the RGB IN jack on the set.
Connect the PC audio output to the AUDIO IN (RGB, DVI) jack on the set.

Connect the DVI output of the PC to the HDMI/DVI IN 1(DVI) jack on the set.
Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the set.

PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
G Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.
G Check the image on your TV. There may be noise
associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is pre- sent, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the
G Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become permanently imprinted on the screen.
G The synchronization input form for Horizontal and
Vertical frequencies is separate.
Supported Display Specifications (RGB/HDMI1-PC)
Supported Display Specifications (HDMI2-DTV)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
31.469 70.08
31.500 60.00 31.469 59.94
31.469 59.94 37.861 72.80 37.500 75.00
44.960 59.94 45.000 60.00
35.156 56.25 37.879 60.31 48.077 72.18 46.875 75.00
33.720 59.94 33.750 60.00
Supported Display Specifications (Y, CB /PB,CR /PR)
48.363 60.00 56.476 70.06 60.023 75.02
Horizontal Vertical Frequency(KHz) Frequency(Hz)
15.73 59.94 15.73 60.00 31.47 59.94 31.50 60.00
47.700 60.00
47.720 59.799
47.130 59.658
44.96 59.94 45.00 60.00
Supported Display Specifications (RGB/HDMI1-DTV)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
33.72 59.94 33.75 60.00
44.96 59.94 45.00 60.00
* Except 42PG60C/65C models in HDMI1-PC mode.
33.72 59.94 33.75 60.00

Supported Display Specifications (RGB/HDMI1-PC)
Supported Display Specifications (HDMI2-DTV)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
31.469 70.08
31.500 60.00 31.469 59.94
31.469 59.94 37.861 72.80 37.500 75.00
44.960 59.94 45.000 60.00
35.156 56.25 37.879 60.31 48.077 72.18 46.875 75.00
33.720 59.94 33.750 60.00 67.500 60.00
48.363 60.00 56.476 70.06 60.023 75.02
Supported Display Specifications (Y, CB /PB,CR /PR)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
47.700 60.00
15.73 59.94 15.73 60.00 31.47 59.94 31.50 60.00
47.720 59.799
47.130 59.658
1280x1024 (RGB only) 1400x1050 (RGB only)
63.668 59.895
44.96 59.94 45.00 60.00
65.317 59.978
33.72 59.94 33.75 60.00 67.50 60.00
74.537 59.869
66.587 59.934
74.038 59.950
Supported Display Specifications (RGB/HDMI1-DTV)
Horizontal Vertical Frequency(KHz) Frequency(Hz)
44.96 59.94 45.00 60.00

REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
Turns your TV or any other programmed equipment on or off, depending on mode.
TV TV
POWER
In AV 1-2, Component, RGB, HDMI1/DVI, and HDMI2 input sources, screen returns to the last TV channel.
INPUT
DVD
MULTI
VCR
External input modes rotate in regular sequence: TV, AV1- 2, Component, RGB, HDMI1/DVI and HDMI2.
PIP PIP CH - PIP CH + PIP INPUT
MULTI
Selects: RGB,HDMI1/DVI, HDMI2 and Component input sources.
Adjusts brightness on screen.
PIP
Switches the sub picture Double Window or off mode. Gp.41-42
SAP
PIP CH +/-
Changes the PIP channel. G p.42
Select the connected input source for the sub-picture. G p.41
Selects the factory preset picture depend on the viewing environment. G p.45
TIMER
EZ SOUND
Selects the factory preset sound for type of program. G p.55
CH
PAGE
MUTE
SWAP)
Exchange the main/sub images. G p.42
Control video cassette recorders or DVD players.
Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.
BACK
FLASH BACK
Tune to the last channel viewed.
SWAP(or PIP · VCR/DVD control buttons · NUMBER button


Select the remote’s operating mode: TV, DVD, VCR (or STB).
Select a closed caption. G p.62(*In DTV/CADTV mode G p.63)
Navigate the on-screen menus and adjust the system set- tings to your preference.
Clears all on-screen displays and returns to TV viewing from any menu.
Select the amount of time before your TV turns off auto- matically. G p.69
Move from one full set of screen information to the next one.
side and install the batteries matching correct polarity (+ with +, - with -).
Don’t mix old or used batteries with new ones.

TURNING ON TV
First, connect power cord correctly. At this moment, the TV switches to standby mode.
Select the viewing source by using the INPUT(or TV INPUT) button on the remote control.
even if the power cord is out.
When finished using the TV, press the POWER button on the remote con- trol. The TV reverts to standby mode.
G If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
Press the CH ( + or - ) or CH ( or ) or NUMBER buttons to select a channel number. 1
Adjust the volume to suit your personal preference.
Press the VOL ( + or -) button to adjust the volume.
If you want to switch the sound off, press the MUTE button.
You can cancel the Mute function by pressing the MUTE or VOL ( + or -) button.

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Press the MENU button and then use D or E or or button to select the each menu.
Press the G or button and then use D E F G or button to display the available menus.



XD
For USA For Canada


Aux. Block
Aux. Block


Auto config.
Manual config.

CHANNEL SETUP
Auto Scan (EZ Scan)
Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run EZ Scan again after any Antenna/Cable connection changes. A password is required to gain access to EZ Scan menu if the Lock System is turned on.
Press the MENU button and then use D or E or
or button to select the SETUP menu.
Press the G or button and then use D or E or or button to select EZ Scan.

Press the ENTER button to begin the channel search. Allow EZ Scan to complete the channel search cycle for ANTENNA and CABLE.
Selection ( G or ) leads you to the EZ scan screen.
Processing EZ scan...
Selection ( G or ) leads you to the EZ scan screen.
MENU Prev. Next

A password is required to gain access to Manual Scan menu if the Lock System is turned on.
Press the MENU button and then use D or E or or button to select the SETUP menu.
Press the G or button and then use D or E or or button to select Manual Scan.
Press the G or button and then use D or E or or button to select Analog(TV, CATV), Digital(DTV, CADTV).
Press the G or button and then use D or E or or button to select channel you want to add or delete.
Press the ENTER button to add or delete the channel.
Press the EXIT or RETURN button to return to TV viewing or press MENU button to return to the previ- ous menu.
ANALOG G 2
ANALOG 2
Press to delete the channel.

Channel Editing
A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black, and the channels deleted from the Custom List are displayed in gray. Once a channel is high- lighted you can add or delete the channel by referring to the small window at the top-left corner of the screen.
A password is required to gain access to Manual Scan menu if the Lock System is turned on.
Press the MENU button and then use D or E or or button to select the SETUP menu.
Press the G or button and then use D or E or or button to select Channel Edit.
Press the G or button and then use D or E or or button to select ANALOG or DIGITAL.
Press the G or button and then use D or E or or button to select channel and then use the ENTER button to add or delete it.
ANALOG
D
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

This feature displays the DTV signal levels being received and indicates whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. DTV Signal: This function is only available when the input signal is DTV or CADTV.
Press the MENU button and then use D or E or or button to select the SETUP menu.
Press the G or button and then use D or E or or button to select DTV Signal.
View the on-screen signal strength monitor to see the quality of the signal being received.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previ- ous menu.

CHANNEL LABEL
Choose preset labels for your channels. If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn't preset a label for the channel.
Press the MENU button and then use D or E or or button to select the SETUP menu.
Press the G or button and then use D or E or or button to select Channel Label.
Press the G or button and then use D or E or or button to select a channel to label.
Ch. ANALOG 2
Press the G or button and then use D or E or or button to select the appropriate label for the channel.
Press EXIT or RETURN button to return to TV viewing or press MENU button to return to the previous menu.

WATCHING DW (DOUBLE WINDOW)
Double Window mode splits the screen into two images, allowing two picture sources to be shown on the TV screen at the same time. Each source is given half the screen.
Press the PIP button to access the sub picture.

Selecting an Input Signal Source for Double Window
Use the PIP INPUT button to select the input source for the sub picture. Each press of PIP INPUT button changes the PIP source.
Use the PIP INPUT button to select the input source for the sub picture. Each press of PIP INPUT button changes the PIP source.
Main Picture Source Available Sub Picture Sources
AV1 TV, AV2
AV2 TV, AV1
RGB, Component, HDMI1/DVI, HDMI2 TV, AV1, and AV2
DW Mode · PIP Off

TV Program Selection for PIP
The selected channel number is displayed just below the input source of main picture. 1
Use the PIP CH +/- button to select a channel for the sub picture.
Repeatedly, use the SWAP or PIP SWAP button to switch the main and sub pictures.
main and sub pictures.

This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed.
Press the RATIO button repeatedly to select the desired picture format.
Set by program Selects the proper picture proportion to match the source’s image.
(4:3 4:3) (16:9 16:9)


4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.

4:3
16:9 Adjust the picture horizontally, in a linear proportion to fill the entire screen.

16:9
Set By Program · Set By Program

Horizon The screen size is, more enlarged at both sides, to create a spectacular view.

Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.

Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The pic- ture taking a halfway trade off between alteration and screen coverage.

Horizon · Zoom 1 · Zoom 2

EZ Picture - Preset
EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. Daylight, Normal, Night Time Settings are preset for the opti- mum picture quality at the factory and are not adjustable. In the User1 and User2 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint.
Press the EZ PIC button repeatedly to select the picture appearance setup option as below(Except 42PG60C, 42PG65C models): Daylight, Normal, Night Time, User1, and User2 (your own settings).
Press the EXIT or RETURN button to save and return to TV viewing.
XD

Color Tone - Preset
Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue.
When selecting EZ Picture (User 1 and User 2), you can choose the Color Temperature.
Press the MENU button and then use D or E or or button to select the VIDEO menu.
PICTURE CONTROL
Press the G or button and then use D or E or or button to select Color Temperature.
Press the G or button and then use D or E or or button to select either Cool, Normal, Warm or User.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

EZ Picture - User Mode
Adjust the picture appearance to suit your preference and viewing situations.
This feature operate only if the EZ Picture set User 1 or User 2.

Press the MENU button and then use D or E or or button to select the VIDEO menu.
Press the G or button and then use D or E or or button to select EZ Picture.
Press the G or button and then use D or E or or button to select User 1 or User 2.
Press the G or button and then use D or E or or button to select the desired picture option (Contrast, Brightness, Color, Sharpness, or Tint).
Press the G or button and then use F or G or or button to make appropriate adjustments.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

Color Tone - User Mode
You can also adjust the detailed settings (Red, Green, Blue) by selecting the Color Temperature-User menu.
Press the MENU button and then use D or E or or button to select the VIDEO menu.
PICTURE CONTROL
Press the G or button and then use D or E or or button to select Color Temperature.
Press the G or button and then use D or E or or button to select User.
Press the G or button and then use D or E or or button to select Red, Green, or Blue.
Press the G or button and then use F or G or or button to make appropriate adjustments.
-40 ~ +40.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

Red 0 F G

XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital sig- nal processing algorithm. When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically changed to Auto. When selecting EZ Picture options (User 1 and User 2), you can choose the Auto / Manual. When selecting the Manual, you can adjust the XD Contrast, XD color and XD Noise.
Press the MENU button and then use D or E or or button to select the VIDEO menu.
PICTURE CONTROL
Press the G or button and then use D or E or or button to select XD.
Press the G or button and then use D or E or or button to select Auto or Manual.
Selecting the Manual Mode 1. Press the G or button and then use D or E or or button to select XD Contrast, XD Color or XD NR (Noise), MPEG NR.
cally according to the brightness of the reflection.
automatically to reproduce as closely as possible to the natural colors.
MPEG NR 0
point where it does not damage the original pic- ture.
appear on the screen during watching the TV. 2. Press the F or G or or button to select On or Off.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

ADVANCED - CINEMA MODE
Set up the TV for the best picture appearance for viewing movies.
When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in Analog, AV1, AV2, and Component 480i mode.
Press the MENU button and then use D or E or or button to select the VIDEO menu.
PICTURE CONTROL
Press the G or button and then use D or E or or button to select Advanced.
Press the G or button and then use D or E or or button to select Cinema.
Press the G or button and then use D or E or or button to select On or Off.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV1, AV2, HDMI1/DVI, or HDMI2mode.
Press the MENU button and then use D or E or or button to select the VIDEO menu.
PICTURE CONTROL
Press the G or button and then use D or E or or button to select Advanced.
Press the G or button and then use D or E or or button to select Black level.
Press the G or button and then use D or E or or button to select Low or High.
The screen gets darker.
The screen gets brighter.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

PICTURE RESET
Use to quickly reset all the Video menu options to their original factory preset values.
Press the MENU button and then use D or E or or button to select the VIDEO menu.
Press the G or button and then use D or E or or button to select Reset.
Press the G or button to reset the Video menu options to original values.
LOW-POWER PICTURE MODE (Only 42PX8DC model)
Low power reduces the plasma display power consumption.
Press the MENU button and then use D or E or or button to select the OPTION menu.
Press the G or button and then use D or E or or button to select Low Power.
Press the G or button and then use D or E or or button to select On or Off.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image. Use our unique method to minimize any fixed image on the screen.
Press the MENU button and then use D or E or or button to select the OPTION menu.
Press the G or button and then use D or E or or button to select ISM Method.
Press the G or button and then use D or E or or button to select either Normal, White Wash, Orbiter or Inversion.
If image sticking is never a problem, ISM is not necessary set to Normal.
White Wash removes permanent images from the screen.
Normal White Wash Orbiter Inversion
An excessive permanent image may be impossible to clear entirely with White Wash. To return to normal viewing, press any button.
Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the image will move once per 2 minutes : Left Right Upside Downside Right Left Downside Upside.
Inversion will automatically invert the plasma display panel color every 30 minutes.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

AUTO VOLUME LEVELER (EZ SOUNDRITE)
Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level. SoundRite makes sure that the volume level remains consis- tent whether you are watching a commercial or a regular TV program.
Press the MENU button and then use D or E or or button to select the AUDIO menu.
Press the G or button and then use D or E or or button to select EZ SoundRite.
Press the G or button and then use D or E or or button to select On or Off.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Normal, Stadium, News, Music and Theater are preset for good sound quality at the factory and are not adjustable.
Press the EZ SOUND button repeatedly to select the appropriate sound setup as below(Except 42PG60C, 42PG65C models): Normal, Stadium, News, Music, Theater, and User (your own settings).
Press EXIT or RETURN button to return to TV viewing.

SOUND SETTING ADJUSTMENT - USER MODE
Adjust the sound to suit your taste and room situations.
Press the MENU button and then use D or E or or button to select the AUDIO menu.
Press the G or button and then use D or E or or button to select EZ Sound.
Press the G or button and then use D or E or or button to select User.
Press the G or button and then use D or E or or button to select the desired sound option (Treble, Bass, or Front Surround).
Press the G or button and then use F or G or or button to make appropriate adjustments.
Selecting the Front surround Press the G or button and then use F or G or or button to select Off or 3D EchoSound System.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.
3D EchoSound System Creates a stunning simulated stereo effect from any mono sound and a realistic three-dimensional sound with a very wide and deep sound stage.

Adjust the left/right sound of speaker to suit your taste and room situations.
Press the MENU button and then use D or E or or button to select the AUDIO menu.
Press the G or button and then use D or E or or button to select Balance.
Press the G or button and then use F or G or or button to make appropriate adjustments.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

TV SPEAKERS ON/OFF SETUP
Turn the TV speakers off if using external audio equipment.
Press the MENU button and then use D or E or or button to select the AUDIO menu.
Press the G or button and then use D or E or or button to select TV Speakers.
Press the G or button and then use D or E or or button to select On or Off.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo pro- gram if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to the mono sound in remote areas during stereo/SAP broadcasting. Stereo or SAP can be received in Analog channel.
Use the SAP button to select your desired MTS mode in analog signal. Each time you press the SAP button, Mono, Stereo, or SAP appear in turn.
them with the SAP button.
Press EXIT or RETURN button to save and return to TV viewing. 2

AUDIO LANGUAGE
Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode.
Press the MENU button and then use D or E or or button to select the AUDIO menu.
Press the G or button and then use D or E or or button to select Audio Language.
Press the G or button and then use D or E or or button to select: English, Spanish, or French.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

The menus can be shown on the screen in the selected lan- guage. First select your language.
Press the MENU button and then use D or E or
or button to select the OPTION menu.
Press the G or button and then use D or E or or button to select Language.
Press the G or button and then use D or E or or button to select your desired language. From this point on, the on-screen menus will be shown in the selected language.
Press the EXIT or RETURN button to return to TV viewing or press MENU to return to the previous menu.

CAPTION / TEXT
Analog Broadcasting System Captions
Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Text displays information, usually at the bottom position and is used for a data service, generally not program related. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which was last set when you turn the power off. When you select the CC1 ~ Text4, Caption options must be disabled.
Use the CC button repeatedly to select Caption Off, CC1, CC2, CC3, CC4, Text1, Text2, Text3 or Text4.
Off CC1 CC2 CC3 CC4 Text1 Text2 Text3 Text4

Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program.
Press the MENU button and then use D or E or or button to select the OPTION menu.
Press the G or button and then use D or E or or button to select Caption/Text.
Press the G or button and then use D or E or or button to select available caption languages: English, Spanish, or French.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

CAPTION OPTIONS
Customize the DTV/CADTV captions that appear on your screen.
Press the MENU button and then use D or E or or button to select the OPTION menu.
Press the G or button and then use D or E or or button to select Caption Options.
Press the G or button and then use D or E or or button to select Custom.
Press the G or button and then use D or E or or button to customize the Style, Font, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language.
G Size: Set the word size.
G Font: Select a typeface for the text.
G Text Color: Choose a color for the text.
G Text Opacity: Specify the opacity for the text color.
Size F A Standard G
G Bg (Background) Color: Select a background color.
G Bg (Background) Opacity: Select the opacity for the
background color.
G Edge Type: Select an edge type.
G Edge Color: Select a color for the edges.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

CLOCK SETTING
Auto Clock Setup
The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. The factory default value of the Auto Clock is Off, because a clock information sent each broadcasting station is different.
Press the MENU button and then use D or E or or button to select the TIME menu.
Press the G or button and then use D or E or or button to select Auto Clock.
Press the G or button and then use D or E or or button to select On.
Press the G or button and then use D or E or or button to select your viewing area time zone U.S.A : Eastern, Central, Mountain, Pacific, Alaska or
New F.land or Atlantic.
Press the G or button and then use D or E or or button to select Auto, Off, On, depending on whether or not your viewing area observes Daylight Saving time.
3 2 5 4
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

Manual Clock Setup
If the current time setting is wrong, reset the clock manually.
Press the MENU button and then use D or E or or button to select the TIME menu.
Press the G or button and then use D or E or or button to select Manual Clock.
Press the G or button and then use F or G or or to select either the year, date, or time option. Once selected, use the D or E or or button to set the year, date, and time option.
- Date
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

The timer function operates only if the current time has been set. The Off-Timer function overrides the On-Timer function if they are both set to the same time. The TV must be in standby mode for the On-Timer to work. If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode.
Press the MENU button and then use D or E or or button to select the TIME menu.
Press the G or button and then use D or E or or button to select Off Timer or On Timer.
Press the G or button and then use D or E or or button to select On.
Press the G or button and then use D or E or or button to set the hour.
Press the G or button and then use D or E or or button to set the minutes.
3 2 5 4
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

AUTO SHUT-OFF SETTING
If set to on and there is no input signal, the TV turns off automatically after 10 minutes.
Press the MENU button and then use D or E or or button to select the TIME menu.
Press the G or button and then use D or E or or button to select Auto Off.
Press the G or button and then use D or E or or button to select On or Off.
If set to On and there is
no input signal, the TV
after 10 minutes.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.
Press the TIMER button repeatedly to select the number of minutes. First the Off option appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to count down from the number of minutes selected.
To check the remaining minutes before the TV turns off, press the TIMER button once.
To cancel the Sleep Timer, press the TIMER button repeatedly to select Off.

AUTO CONFIGURE (RGB [PC] MODE ONLY)
Automatically adjusts picture position and minimizes image shaking. Although the image is still not correct, your set is functioning properly but needs further adjustment.
Auto config.
Press the MENU button and then use D or E or or button to select the SCREEN menu.
Manual config.
Press the G or button and then use D or E or or button to select Auto config..
Press the G or button to start Auto config..
Auto config. G
shown on screen.
Manual config.
Auto adjustment again.
If the picture needs to be adjusted more after Auto adjustment in RGB (PC), you can adjust the Manual config..
Press the EXIT or RETURN button to return to TV viewing or press the MENU button to return to the previous menu.

If the picture isn’t clear after auto adjustment and especial- ly if characters are still trembling, adjust the picture phase manually. This function works in the following mode: RGB-PC, RGB-DTV, Component 480p/720p/1080i, HDMI 480p/720p/1080i. The Phase, Clock functions work in the following mode: RGB-PC mode.
Press the MENU button and then use D or E or or button to select the SCREEN menu.
Auto config.
Manual config.
Press the G or button and then use D or E or or button to select Manual config..
Press the G or button and then use D or E or or button to select Phase, Clock, H-posi- tion or V-position.
This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Auto config.
Manual config. G
This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.
This function is to adjust picture to left/right and up/down as you prefer.
Press the F or G or or button to make appro- priate adjustments.
Press the EXIT or RETURN button to return to TV viewing or press the MENU button to return to the previous menu.

SELECTING XGA MODE
To see a normal picture, match the resolution of RGB mode and selection of XGA mode.
This function works in the following mode: RGB-PC mode.
If you select the 1600x1200, 1920x1200 resolution, uXGA mode is displayed.
Auto config.
Manual config.
Press the MENU button and then use D or E or or button to select the SCREEN menu.
Press the G or button and then use D or E or or button to select XGA mode.
Press the G or button and then use D or E or or button to select the desired XGA resolu- tion.
Auto config.
Manual config.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

This function operates in current mode. To initialize the adjusted value.
Auto config.
Press the MENU button and then use D or E or or button to select the SCREEN menu.
Manual config.
Press the G or button and then use D or E or or button to select Reset.
Press the G or button.
Auto config.
Manual config.

Parental Control can be used to block specific channels, ratings and other viewing sources.
The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possi- ble to block all program viewing for a time period. To use this function, the following must be done: 1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only.
SET PASSWORD & LOCK SYSTEM
Setting up your password
Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu.
Press the MENU button and then use the D or E or or button to select the LOCK menu. Then, press the G or button.
*
password “0-0-0-0”.
Enter Password · Enter Password

Change the password by inputting a new password twice.
For USA For Canada
After inputting the password, use the D or E or or button to choose Set password.
Press the G or button and then choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the Confirm. Then your changed password has been memorized.
Aux. Block
Aux. Block
Press EXIT or RETURN to return to TV viewing or press MENU to return to the previous menu.
*
Aux. Block
G If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’
on the remote control.
For USA For Canada
Enables or disables the blocking scheme you set up previously.
After inputting the password, use the D or E or or button to choose Lock System.
Aux. Block
Aux. Block
Press the G or button and then use the D or E or or button to select On or Off.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.
Aux. Block

CHANNEL BLOCKING
Blocks any channels that you do not want to watch or that you do not want your children to watch.
For USA For Canada
After inputting the password, use the D or E or or button to choose Block Channel.
Aux. Block
Aux. Block
Press the G or button. You will now see a screen filled with channel numbers and a preview picture.
Use D E F G or button to select a channel and then use the ENTER button to block or unblock it.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.
Aux. Block
For USA For Canada
Enables you to select a source to block from the external source devices you have hooked up.
Aux. Block
Aux. Block
After inputting the password, use the D or E or or button to choose Aux. Block.
Press the G or button and then use the F or G or or button to select a source.
Press the G or button and then use the D or E or or button to select On or Off on the each source.
Aux. Block G
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

Movie Rating (MPAA) - for USA only
Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
After inputting the password, use the D or E or or button to choose Movie Rating.
Press the G or button and then use the D or E or or button to select G, PG, PG-13, R, NC-17 or X.
Aux. Block
Aux. Block
PG-13, R, NC-17 and X will be blocked.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.
For USA For Canada
Downloadable Rating
Aux. Block
After inputting the password, use the D or E or or button to choose Downloadable Rating.
Aux. Block
Press the G or button and then use the D or E or or button to select Dim0, Dim1, Dim2, or Dim3.
Press the G or button and then use the D or E or or button to select D1L1, D1L2, or D1L3.
Press EXIT or RETURN button to return to TV viewing or press MENU button to return to the previous menu.
Aux. Block
G This function may become available in the future and
will be available only for digital channel signal.
G Based on rating table, your TV's OSD (On
G This function operates only when TV has received
Screen Display) may differ slightly from what is shown in this manual.
Region5 Rating data.

TV Rating Children -for USA only
Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
After inputting the password, use the D or E or or button to choose TV Rating-Children.
Aux. Block
Press the G or button and then use the D or E or or button to select Age, or Fantasy Violence. Press the G or button and then use the D or E or or button to select block options.
Aux. Block
Press EXIT or RETURN button to return to TV viewing or press MENU button to return to the previous menu.
Based on the ratings, blocks certain TV programs that you and your family do not want to view.
After inputting the password, use the D or E or or button to choose TV Rating-General.
Press the G or button and then use the D or E or or button to select Age, Dialogue, Language, Sex or Violence. Press the G or button and then use the D or E or or button to select block options.
Aux. Block
Aux. Block
Press EXIT or RETURN button to return to TV viewing or press MENU button to return to the previous menu.

Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
After inputting the password, use the D or E or or button to choose TV Rating-English.
Aux. Block
Press the G or button and then use the D or E or or button to select E, C, C8+, G, PG, 14+, 18+, or Blocking Off.
E C C8+ G PG 14+ 18+ Blocking Off
Aux. Block
Press EXIT or RETURN button to return to TV viewing or press MENU button to return to the previous menu.
Based on the ratings, blocks certain TV programs that you and your family do not want to view.
After inputting the password, use the D or E or or button to choose TV Rating-French.
Press the G or button and then use the D or E or or button to select E, G, 8 ans+, 13 ans+, 16 ans+, 18 ans+, or Blocking Off.
Aux. Block
E G 8 ans+ 13 ans+ 16 ans+
Aux. Block
Press EXIT or RETURN button to return to TV viewing or press MENU button to return to the previous menu.

TROUBLESHOOTING
The operation does not work normally.
causing obstruction. Ensure you are pointing the remote control directly at the TV.
The video function does not work.
No picture &No sound
where the product’s power cord was plugged in.
contact your service center, if the picture has not appeared after five minutes.
No or poor color

The audio function does not work.
Picture OK & No sound
No output from one
when the product is turned on or off and does not indicate a fault with the product.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
Vertical bar or stripe on
background & Horizontal Noise &
Screen color is unstable

MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
I To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
I Please be sure not to use a wet cloth.
G If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
42PG65C (42PG65C-UA)
41.1 x 28.9 x12.1 inches 1044.4 x 735.4 x 308.0 mm
Dimensions (Width x Height x Depth)
41.1 x 26.7x 3.1 inches 1044.4 x680.5x 79.6mm
41.1 x 26.7x 4.2 inches 1044.4 x680.5x 107.6mm
With stand Without stand
61.2 pounds / 27.8 kg 55.1 pounds / 25.0 kg
55.1 pounds / 25.0 kg
42LG500H (42LG500H-UA,
MODELS 32LG500H (32LG500H-UA/UB), 32LG505H (32LG505H-UA/UB), 32LG515H (32LG515H-UA/UB)
32.0 x 23.5 x 8.9 inches 813.8 x 598.8 x 227.3 mm
36.8 x 26.9 x 11.5 inches 936.4 x 685.4 x 293.4 mm
40.7 x 28.9 x 11.5 inches 1034.0 x 735.0 x 294.0 mm
Dimensions (Width x Height x Depth)
36.8 x 24.1 x 4.4 inches 936.4 x 612.8 x 112.1 mm
40.7 x 26.1 x 4.5 inches 1034.0 x 663.0 x 115.8 mm
32.0 x 21.2 x 4.3 inches 813.8 x 540.4 x 111.5 mm
With stand Without stand
29.9 pounds / 13.6 kg 26.6 pounds / 12.1 kg
40.3 pounds / 18.3 kg 34.3 pounds / 15.6 kg
48.5 pounds / 22.0 kg 42.9 pounds / 19.5 kg

Width x Height x Depth With Stand (inches/mm)
31.8 x 23.9 x 9.8 inches 806.6 x 607.5 x 249.0 mm
31.8 x 21.7 x 3.8 inches 806.6 x 552.3 x 97.2 mm
Weight (pounds / kg) With Stand
33.7 pounds / 15.3kg 27.6 pounds / 12.5 kg
36.5 x 27.4 x 10.4 inches 926.8 x 695.8 x 264.6 mm
Width x Height x Depth With Stand (inches/mm)
36.5 x24.8 x 4.2 inches 926.8 x 629.8 x 107.4 mm
Weight (pounds / kg) With Stand
47.2 pounds / 21.4 kg 36.8 pounds / 16.7 kg
40.7 x 29.6 x 11.6 inches 1033.1 x 750.7 x 294.2 mm
Width x Height x Depth With Stand (inches/mm)
40.7 x 27.0x 4.3 inches 1033.1 x 686.5 x 110.2 mm
Weight (pounds / kg) With Stand
61.3 pounds / 27.8 kg 47.2 pounds / 21.4 kg
Width x Height x Depth With Stand (inches/mm)
36.3 x 24.2 x 11.3 inches 922.0 x 615.0x 288.0 mm
36.3 x 21.5 x 3.9 inches 922.0 x 546.0 x 98.0 mm
Weight (pounds / kg) With Stand
39.0 pounds / 17.7 kg 30.4 pounds / 13.8 kg
Width x Height x Depth With Stand (inches/mm)
46.7 x 28.1 x 10.6 inches 1186.0 x 714.0 x 270.0 mm
46.7 x 25.7 x 3.9 inches 1186.0 x 654.0 x 99.0 mm
Weight (pounds / kg) With Stand
72.5 pounds / 32.9 kg 55.6 pounds / 25.2 kg
40.7 x 29.6 x 11.6 inches 1033.1 x 750.7 x 294.2 mm 40.7 x 27.0x 4.3 inches 1033.1 x 686.5 x 110.2 mm
Width x Height x Depth With Stand (inches/mm)
APPENDIX
42LB50C (42LB50C-UA)
61.3 pounds / 27.8 kg 47.2 pounds / 21.4 kg
Weight (pounds / kg) With Stand
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
-4 ~ 140°F (-20 ~ 60°C)

PROGRAMMING THE REMOTE CONTROL
The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands.
To find out whether your remote control can operate each device without programming, turn on the device
(such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button. If the device is turned off and it responds properly the remote control need not be programmed. If not, the remote should be programmed to operate the device. The program- ming procedures are explained below.
Press the MENU and MUTE button continuously at the same time for two seconds; the currently selected device button is illuminated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2.
Enter the appropriate code from the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful.
Press the MENU button to store the code. After blinking twice, this code is stored.
Test the remote control functions to see if the device responds properly. If not, steps 2-5.
Remote Control Code
DVD
Brand Codes Brand Codes Brand Codes
APEX DIGITAL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNAVOX 013 MARANTZ 024
MITSUBISHI 002 NAD 023 ONKYO 008 017 PANASONIC 003 009 PHILIPS 013 PIONEER 004 026 PROCEED 021 PROSCAN 005 006
RCA 005 006 SAMSUNG 011 015 SONY 007 THOMPSON 005 006 TOSHIBA 019 008 YAMAHA 009 018 ZENITH 010 016 025

Brand Codes Brand Codes Brand Codes
SAMSUNG 032 040 102 104 105 107 109 112 113 115 120 122 125 SANSUI 022 043 048 135 SANYO 003 007 010 014 102 134 SCOTT 017 037 112 129 131 SEARS 003 008 009 010 013 014 017 020 031 042 073 081 101 SHARP 031 054 149 SHINTOM 024 SONY 003 009 031 052 056 057 058 076 077 078 149 SOUNDESIGN 034 STS 013 SYLVANIA 031 033 034 059 067 SYMPHONIC 034 TANDY 010 034 TATUNG 039 043 TEAC 034 039 043 TECHNICS 031 033 070 TEKNIKA 019 031 033 034 101 THOMAS 034 TMK 006 TOSHIBA 008 013 042 047 059 082 112 131 TOTEVISION 040 101 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC 040 WARDS 003 013 017 024 031 033 034 040 053 054 131 YAMAHA 012 034 039 043 ZENITH 034 048 056 058 072 080 101
AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 DAYTRON 108 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME 059 EMERSON 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 FISHER 003 008 009 010 FUNAI 034 GE 031 033 063 072 107 109 144 147 GO VIDEO 132 136 HARMAN KARDON 012 045 HITACHI 004 018 026 034 043 063 137 150 INSTANTREPLAY 031 033 JCL 031 033 JCPENNY 012 013 015 033 040 066 101 JENSEN 043 JVC 012 031 033 043 048 050 055 060 130 150 152 KENWOOD 014 034 039 043 047 048 LG (GOLDSTAR) 001 012 013 020 101 106 114 123 LLOYD 034 LXI 003 009 013 014 017 034 101 106 MAGIN 040
MAGNAVOX 031 033 034 041 067 068 012 031 033 067
MARTA 101 MATSUI 027 030 MEI 031 033 MEMOREX 003 010 014 031 033 034 053 072 101 102 134 139 MGA 045 046 059 MINOLTA 013 020 MITSUBISHI 013 020 045 046 049 051 059 061 151 MTC 034 040 MULTITECH 024 034 NEC 012 023 039 043 048 NORDMENDE 043 OPTONICA 053 054 PANASONIC 066 070 074 083 133 140 145
PENTAX 013 020 031 033 063 PHILCO 031 034 067 PHILIPS 031 033 034 054 067 071 101 PILOT 101 PIONEER 013 021 048 PORTLAND 108 PULSAR 072 QUARTZ 011 014 QUASAR 033 066 075 145 RCA 013 020 033 034 040 041 062 063 107 109 140 144 145 147 REALISTIC 003 008 010 014 031 033 034 040 053 054 101 RICO 058 RUNCO 148 SALORA 014

SET ID
Use this function to specify a TV ID number.
Press the MENU button and then use D or E or or button to select the OPTION menu.
Press the G or button and then use D or E or or button to select Set ID.
Press the G or button and then use D or E or or button to adjust Set ID to choose the desired TV ID number. The adjustment range of Set ID is 1~99.
Press EXIT or RETURN button to return to TV view- ing or press MENU button to return to the previous menu.

Code Function Note (Hexa)
Code Function Note (Hexa)
0F TV INPUT Remote control Button (Some models)
D6 TV Discrete IR Code
0B INPUT Remote control Button
08 POWER Remote control Button (Power On/Off)
C4 POWER ON Discrete IR Code
98 MULTI Remote control Button (Some models)
79 RATIO Remote control Button
C5 POWER OFF Discrete IR Code
0E TIMER Remote control Button
10-19 Number Key 0-9 Remote control Button
5A AV1 Discrete IR Code
4C - (Dash) Remote control Button
1A FLASH BACK Remote control Button
D0 AV2 Discrete IR Code
09 MUTE Remote control Button
02 VOL + Remote control Button
BF COMPONENT Discrete IR Code
03 VOL - Remote control Button
00 CH + , Remote control Button
D5 RGB-PC Discrete IR Code
01 CH - , Remote control Button
39 CC Remote control Button
CE HDMI1/DVI Discrete IR Code
40 D , Remote control Button
41 E , Remote control Button
CC HDMI2 Discrete IR Code
07 F , Remote control Button
06 G , Remote control Button
76 Ratio 4:3 Discrete IR Code
44 ENTER Remote control Button
(Only 4:3 Mode)
43 MENU Remote control Button
77 Ratio 16:9 Discrete IR Code
52 EZ SOUND Remote control Button (Some models)
(Only 16:9 Mode)
4D EZ PIC Remote control Button (Some models)
AF Ratio Zoom Discrete IR Code
5B EXIT, RETURN Remote control Button
0A SAP Remote control Button
E1 Remote control Button (Some models)
E0 Remote control Button (Some models)
AA INFO Remote control Button
60 PIP Remote control Button
72 PIP CH - Remote control Button
71 PIP CH + Remote control Button
61 PIP INPUT Remote control Button
63 SWAP, PIP SWAP Remote control Button


Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.