Instruction/ maintenance manual of the product 32LG3DDH LG Electronics
Go to page of 47
Commercial Mode Setup pages 14 – 15 Express Script pages 16 – 17 Cloning Information pages 30 – 35 EXPERIENCED INST ALLER © Copyright 201 1, LG Electronics U.
2 206-4096 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________Serial No. _______________ W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
3 206-4096 IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
4 206-4096 IMPORT ANT SAFETY INSTRUCTIONS (Continued from previous page) 20. Grounding Ensure that you connect the earth ground wire to pre- vent possible electric shock (i.e., a TV with a three- prong grounded AC plug must be connected to a three-prong grounded AC outlet).
5 206-4096 Safety W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . 3 – 4 T able of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 TV Overview / Setup Checklist.
6 206-4096 TV Overview / Setup Checklist Installation and Setup Checklist __ Unpack TV and all accessories. __ Install batteries in remote control. __ Install TV on VESA mount or stand. Note: It may be advisable to make all cable connections before installing on VESA mount or stand, as appropriate.
7 206-4096 General Guidelines: Choosing a Location for Installing a VESA Standard Mount T o the right are some examples of VESA standard mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instruc- tions provided with the TV stand that will be used to mount the TV .
8 206-4096 Rear Connections Panel ..... .... HDMI/DVI IN A V IN 1 COMPONENT IN USB IN SERVICE ONL Y VIDEO AUDIO R-AUDIO-L (MONO) VIDEO R L RGB IN (PC) RS-232C IN (SERVICE ONL Y ) UPDA TE RESE T AUDIO IN (RGB/DVI) REMOTE CONTROL OUT SPEAKER OUT 8 P B Y P R PILL OW SPEAKER PILL OW SPEAKER NORMAL SPEAKER SPEAKER SWITCH S-VIDEO ȍ .
9 206-4096 Side Connections Panel / RF Antenna & MPI Connections A V IN 2 VIDEO H/P L/ MONO -AUDIO- R Headphone Output Connect headphone to this port.
10 206-4096 MPI Card Slot ANTENNA /CABLE MPI RF CABLE RF cable needs to be disconnected to remove current card. The MPI card is equipped with an RF jack for antenna/cable signal source connection. The slot is also available for installing a PPV card. Note: (LG3DDH TVs only) T urn the TV On.
11 206-4096 1 2 3 4 5 6 3 1 5 2 4 6 TV ON/OFF OPEN CHAN UP/DATA IN COMMON AUDIO OUT CHAN DOWN 3 TV ON/OFF CHAN DOWN CHAN UP (MALE PLUG) VOLUME CONTROL SPKR 5 1 4 6 2 Pillow Speaker Setup Set up pillow speaker after Commercial Mode Setup and Cloning procedures are complete.
12 206-4096 Installer Overview This is the Commercial Mode Setup Guide only . Installer Menu / Commercial Mode Setup T o set up a Master TV , you will need to know how to enter the TV Installer Menu and make changes to the default values as required. If necessary , familiarize yourself with the Installer Menu and how to make and save changes.
13 206-4096 SAP * Analog Mode: Selects MTS sound (Mono, Stereo, or SAP). DTV Mode: Changes the audio language, if additional languages are available. INFO Displays channel information.
14 206-4096 HOSPIT AL PTC INST ALLER MENU 000 INST ALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 Commercial Mode Setup for Master TV This section provides an overview of manual TV configuration. On LG3DDH TVs, these steps are automated in an Express Setup Script (see pages 16 – 17).
15 206-4096 Commercial Mode Setup for Master TV (Cont.) 028 CH. OVERIDE 000 After verifying the TV Setup, set Installer Menu item 028 CH. OVERIDE to 000.* DIGIT AL 19-3 WXYZ MONO STEREO SAP Custom T ext Label “WXYZ” created in 2-5-4 + MENU (Add Channel Label) Mode.
16 206-4096 1. Upon launching, the Installer Menu Wizard prompts you to select a preferred Menu Mode. Use the Up/Down arrow keys on the Installer Remote to select/highlight Express Script in order to proceed with the Installer Menu Wizard. Then, press OK (Enter) on the Installer Remote.
17 206-4096 Express Script Installer Menu Wizard (Cont.) (LG3DDH TVs only) Do you want to allow dir ect access to channels not in the channel list? Installer Menu W izard Step 4. Channel Access OK Exit Express Script Back Next PTC: V1.00.004 CPU: V03.
18 206-4096 Installer Menu HOSPIT AL PTC INST ALLER MENU 000 INST ALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 Menu Item Function V alue Range Default V alue Brief Description of Function and Comments 000 INST ALLER SEQ 0 ~ 3 0 Leave default set to 0.
19 206-4096 Installer Menu (Cont.) Installer Menu Items 027 through 1 17 Menu Item Function V alue Range Default V alue Brief Description of Function and Comments 027 HOSPIT AL MODE 0 ~ 2 (LG3DCH) 0 ~ 162, 254 (LG3DDH) 2 (LG3DCH) 254 (LG3DDH) For LG3DCH, set to 2 (default).
20 206-4096 Detailed Descriptions of Installer Menu Items 000 - INST ALLER SEQUENCE Speci fi es entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff.
21 206-4096 012 - IR BANKS EN (IR Banks Enable) For direct access to a particular channel bank. When enabled, you can access a channel bank by inputting the IR code for the bank. 013 - SCAN MODE (Functional after 2-5-5 + MENU setup transfer) Allows variation in turning the TV On/Of f with Channel Up/Down.
22 206-4096 Installer Menu (Cont.) 028 - CH. OVERIDE (Channel Override) If set to 1, the user can select channels with either Channel Up/ Down or by direct keypad entry . If set to 0, only those channels that are active in the TV’ s memory can be selected.
23 206-4096 078 - UPN MSB (UPN Most Signi fi cant Byte) User programmable number , most signi fi cant byte readable by MPI command. Not linked to serial number . 079 - UPN MSB-1 (UPN Most Signi fi cant Byte-1) User programmable number , most signi fi cant byte-1 readable by MPI command.
24 206-4096 TV Setup Menus Overview AUDIO Auto V olume : Off Clear V oice II : On · Level Balance : Sound Mode : Standard · Infinite Sound :Off · Treble · Bass 0 0 50 50 CHANNEL PICTURE AUDIO TIME.
25 206-4096 Editing/Adding Channel Icons and/or Labels If there is no pre-assigned icon, you can make a custom channel label of up to seven (7) characters to help identify a channel or network. If desired, channel labels can also be added in addition to a pre-assigned icon.
26 206-4096 Channel Banks Overview Channel Banks Note: Disable all Aux sources in the Installer Menu that will not be made available to the end user . Channel banks enable institution administrators to control access to patient in-room TV programming.
27 206-4096 Channel Banks Setup Channel Banks Setup Menu CHANNEL PREVIEW - BANK 1 CH 01 1-001 NORMAL- ADDED Enter -> Change CC -> VCHIP Menu, Ch. Preview -> Exit IDs currently selected channel bank. IDs currently selected channel. IDs channel status in selected bank.
28 206-4096 Channel Banks Setup (Cont.) Use the channel banks to format the channel lineup programming package options for the end user . Each channel bank is capable of storing broadcast digital and analog channels.
29 206-4096 Date _____________ Installer _____________________________________ Page ___ of ____ Location ______________________________________________________________________ Channel Banks W orksheet.
30 206-4096 There are three options for cloning a Master TV Setup: • Using a USB memory device • Using a TLL-1 100A clone programmer • Using a L T2002 clone programmer Each option is described in further detail on the pages that follow . As you perform cloning proce- dures, be sure to complete each task as indicated.
31 206-4096 Cloning Procedures Learning / T eaching a Master TV Setup using a USB Memory Device Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Plug the USB memory device into the USB IN port on the Master TV .
32 206-4096 Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup using a TLL-1 100A Clone Programmer Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode.
33 206-4096 (Optional) Set the Clock Set the time on a Master TV’ s clock. (If the time has already been copied from a TV into the TLL-1 100A clone programmer , you can set the Master TV’s clock by copying the time from the clone programmer .
34 206-4096 THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION XX THE TV IS VERSION XX THE SW IS REVISION XX CLONE CLOCK = XX:XX TV CLOCK = XX:XX - PRESS ANY KEY T O CONTINUE.
35 206-4096 Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup using an L T2002 Clone Programmer (Cont.) (Continued from previous page) 6. Once you select the clone Memory Bank, press ENTER on the Installer Remote. The Memory Bank you selected will be shown.
36 206-4096 Reference: Upgrading TV/PTC Software using a USB Memory Device Checking the Software V ersions Note: This function is not accessible while the TV is in FTG or PPV Mode.
37 206-4096 Reference: Power Consumption Settings Installer Menu item 099 BACK LIGHTING set as shown below . (LG3DCH: Default value is 200; LG3DDH: Default value is 100.) 22LG3DCH/ 22LG3DDH Item 099 Back Lighting (Static) Picture Lumin. (cd/m2) Power Consumption (W atts) Percent Savings Item 099 Back Lighting (Dynamic) Picture Lumin.
38 206-4096 Reference: TV Camport Auto Sense Operation (26/32LG3DCH and 26/32LG3DDH TVs Only) The Camport Auto Sense function is enabled when: 1. Installer Menu item 34 CAMPORT EN is set to 1 AND 2. Installer Menu item 40 AUTO CAMPOR T is enabled (1).
39 206-4096 Reference: TV Aux Input Configuration DIRECT ACCESS T uning TV ENABLE MPI DA T A ST AR T AUX SOURCE ASSIGN- MENT Installer Menu MPI DA T A ST A TUS TYPE 0x41 SOURCES ENABLED (R/W) DA T A S.
40 206-4096 T roubleshooting General T roubleshooting (Some Quick and Easy T ips for Resolving Problems) Software Problems Cannot direct enter channel number or “No Signal” appears.
41 206-4096 Controller Quick Check ST A TUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Ye s No No Ye s Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV .
42 206-4096 Press POWER on Installer Remote. TV responded? Bad TV Ye s No TV stopped responding or continued to respond? TV is in Commercial Mode. Stopped responding TV is not in Commercial Mode. Call T echnical Support for assistance. Continued to respond Leave the TV set ON.
43 206-4096 W arning: Do not connect a clone programmer to a PPV card installed in the Master or T arget TVs, as this will damage the clone programmer and the PPV card.
44 206-4096 Channel Banks Setup Menu CHANNEL PREVIEW - BANK 1 CH 01 1-001 NORMAL- ADDED Enter -> Change CC -> VCHIP Menu, Ch. Preview -> Exit Symptom Cause Solution Cannot change channel status in menu. Installer Menu item 028 CH. OVERIDE is set to 000 and/or Channel Access was denied in Express Script.
45 206-4096 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider . The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV . 300 TO 75 OHM ADAPTER A small device that connects a 2-wire 300 ohm antenna to a 75 ohm RF jack.
46 206-4096 Document Revision History / Notes Notes Document Revision History Date Description May 2008 Revision A: New Document June 2008 Revision B: Installer Menu updates July 2008 Revision C: Chan.
206-4096 Revision G © Copyright 201 1, LG Electronics U.S.A., Inc. Marketed and Distributed in the United States by LG Electronics U.S.A., Inc. 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 For Customer Support/Service, please call: 1-888-865-3026 www .
An important point after buying a device LG Electronics 32LG3DDH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought LG Electronics 32LG3DDH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data LG Electronics 32LG3DDH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, LG Electronics 32LG3DDH you will learn all the available features of the product, as well as information on its operation. The information that you get LG Electronics 32LG3DDH will certainly help you make a decision on the purchase.
If you already are a holder of LG Electronics 32LG3DDH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime LG Electronics 32LG3DDH.
However, one of the most important roles played by the user manual is to help in solving problems with LG Electronics 32LG3DDH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device LG Electronics 32LG3DDH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
